kogan M700 4000 Lumens FHD WiFi Mini Projector User Guide

4000 LUMENS FHD WI-FI
MINI PROJECTOR (M700)
KAM700PRRA
User Guide

SAFETY & WARNINGS

Read this user guide fully and carefully before using the product.

• Do not look directly into the light from the projector.
• A direct burst of intense light can harm your eyes and cause severe damage to the eyes of infants.
• Do not use or store the projector in a damp, humid environment.
• Do not attempt to repair this product yourself. If the product or its power supply experiences any malfunction or damage, cease use immediately and contact help.Kogan.com for support.
• Ensure the projector is a safe distance from any heat-emitting devices or the service life of the projector may be shortened.
• It is strongly suggested not to use the projector for more than 6 hours consecutively.

COMPONENTS

OVERVIEW

Remote Control

INSTALLATION

Place the projector on a flat horizontal surface.

Tripod Mount:
This projector can be mounted on the included tripod using the 6mm (1/4”) thread hole on the bottom of the projector.

OPERATION

Getting started

1. Connect the projector to a power outlet using the power cable.
2. Press the power button on the projector or remote control.
3. The boot screen appears.
4. Adjust the focus ring to make the picture clear.

Connect Input Devices
Use the source button to select the desired input source; USB, MicroSD (TF), HDMI & AV.

On the remote control: Press and “ ” press “ ” or “ ” to select the source. To confirm press “OK”.

USB:

1. Insert a USB storage device into the USB port on the projector.
2. Choose “USB” on the input selection screen.
3. Select the file you want to play.

microSD (TF):

1. Insert a microSD card into the microSD (TF) slot on the projector.
2. Choose “TF” on the input selection screen.
3. Select the file you want to play.

PC:

1. Connect the projector to a PC using the included HDMI cable.
2. Select “HDMI” on the input selection screen.

MacBook or MacBook Air:

1. Connect the projector to a Mac using either a Type-C to HDMI adapter to connect your MacBook or a Mini Display to HDMI adapter to connect with your MacBook Air (adapters not included).
2. Select “HDMI” on the input selection screen.

Game Console:

1. Connect the game console to the projector using an included HDMI cable.
2. Turn on both the projector and game console.
3. Select “HDMI” on the input selection screen.

Headphones/Speakers:

• Connect your headphones or speakers to the 3.5mm audio output on the projector.
• Turn on the projector.
• The projector will output all audio to the connected device.

AV:

• Connect the projector to your AV device using the supplied 3-in-1 AV cable.
• Turn on both the projector and AV device.
• Select “AV” on the input selection screen.

Amazon Fire TV Stick:

1. Plug the TV Stick into the HDMI port of the projector.
2. Choose “HDMI” on the input selection screen.

Note:
Only 1080P TV Sticks are supported, not the 4KTV stick
Wireless Connection (Android device only):
To activate this function, your Android device must support the Multi- Screen/Wireless display.

1. Select “Mirroring” on the input source screen.
2. Ensure your Android device is connected to the internet
3. On your Android device use the “Multi-Screen” Function to search and connect to the projector.

The fluency of screen mirroring with a wireless connection will be affected by the network environment.

1. A bandwidth of 100Mbit or more is recommended when using screen mirroring,
2. Ensure your Android device is close to the projector when using a wireless connection. A distance within 1 meter is recommended.
3. Search for and select the device(s).

SPECIFICATIONS

Protection Size & Distance

NOTES

Need more information?
We hope that this user guide has given you the assistance needed for a simple setup.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>