AirRam® Cordless Vacuum Brush/Foot Area | Support
- June 7, 2024
- Bissell
Table of Contents
If you’re experiencing issues in the Brush/Foot area follow these steps to
resolve:
If Brush jams during use > Machine will shut down & 4 solid red lights will be visible on the Battery
-
Turn OFF > Remove Stick Handle from Foot
- Press black button on lower back of Stick Handle > Pull up
-
Remove Battery & Dirt Bin > Turn Foot over
-
Remove Brush
- Push button on side of foot > While pushing button > Slide hand through opening on bottom to push Brush up & out
- Brush should be pulled first from the side near the release button
-
Clean debris from Brushl & Foot Area
-
Stand Brush on a flat surface (button side down) > Spin Brush
- Brush should spin freely > If not, replace Brush > Go to Parts & Supplies
-
Reinsert Bush while angling the geared end into place
-
Lower Brush while pushing on Black Button
- Align geared end so Brush clicks into place
-
Reattach Foot to Stick Handle
-
Insert Battery & Dirt Bin
-
Has this resolved the issue? (Red lights should go off after 10 seconds)
-
Has this resolved the issue?
- Yes > Great! Glad we can get you back to Cleaning
- No > If the Brush continues to not rotate the Foot Assembly can be replaced > Go to Parts & Supplies
- If you continue to have difficulty > Please Contact Us
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>