K-VIT Mirrors User Manual
- June 3, 2024
- K-VIT
Table of Contents
K-VIT Mirrors
INTRODUCTION
FINALLY YOU WILL GET THE MOST OUT OF YOUR MIRROR!
Thank you for making Reflections by K-VIT your everyday partner
We know how special you are, so this product has been carefully crafted, meticulously inspected and packaged before shipment just for you. Before start enjoying an amazing new experience on your room please read this guide and follow the instructions for a safe use.
Lights on
Use the sensor switch in your mirror to light your room and get ready to makeup.
Forget about foggy mirrors!
Once mirror is light up, the Demister will automatically prepare to warm up
the surface of your mirror clearing up the fog before you take shower
Don’t look for extensions and plugs!
Use shaver socket in the mirror to plug-in your electric shaver and get ready
for an amazing day, simple and convenient.
Clear reflection and rust proof!
This wonderful mirror is made Copper-free coating, giving you a more vibrant
reflection and colors when used together with lighting. Plus its coated
technology keeps it safe from rust for longer time than usual mirrors.
IMPORTANT PRECAUTIONS
- DO NOT lay the mirror on tiled or concrete surface prior to installation. Preferable unpack the mirror at the moment of installation.
- Do not take out the protective plastic until finished installation to prevent chipping of the corners.
- Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may be concealed. Confirm that the wall can support the weight of the mirror.
- A certified electrician must perform all work.
- This product shall be installed only in the zone 2 of your bathroom according to regulations. this mirror is suitable for all other rooms use.
- Shaver socket voltage is 220v recommended for electric shaver use mainly.
HARDWIRED CONFIGURATION
WWW.KARTELLUK.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>