SMART WATCHES ECG Smart Watch Instructions

SMART WATCHES ECG Smart Watch Instructions

1. Power on, appearance, function, shutdown

Power on, appearance, function: In the power off status, long press the button for 3S to turn on, then enter the main interface. The watch supports full- screen touch, slide up, slide down, left slide, right slide, single point and other operations. It can be quick switched between each function mode (please make sure that the battery is full charged for used at first time, if the watch cannot be power on normally at low power, please charge it before operation, the correct charge is as shown in the figure below)

Power off: Long press the side key for 3 seconds to power off / switch to the power off interface then long press the screento shut down

2. Download and install the “Smart Health” APP

1). Scan the QR code on the right to download and install.
.Download and install through the app market:
Android system: search for “Smart Health” through the Google play app market to download and install;
IOS system: search for “Smart Health” through the App Store to download and install

3. APP registration and login:

After opening the “Smart Health” APP, enter the registration/login interface, log in after registering through your email or mobile phone and setting a password, or you can choose to log in without an account ，login and follow the prompts to complete your personal information. （In order to be able to accurately measure and judge your health status, please fill in your age, height, weight and skin color truthfully, so that the AI algorithm can accurately give the results of the health status measurement）

4. Connect your watch to your phone

When using the “SmartHealth” APP to connect to the watch, please turn on the Bluetooth of your mobile phone, enter the “Smart Health” APP and log in, then click “Click to connect to the device” -> select “ES08**” to connect and bind. When pairing, please confirm that it is consistent with the Bluetooth address displayed on the watch

5. Connect the Bluetooth phone to the mobile phone

Turn on the watch and slide it from top to bottom, enter the shortcut menu bar, click the Bluetooth phone Bluetooth switch, turn on the Bluetooth call button,Turn on the Bluetooth phone switch on the watch, turn on the phone’s Bluetooth->Phone Settings->Bluetooth->Search device->Select “ES08” to connect, the Bluetooth connection success icon will appear on the top of the phone after the connection is successful, and the watch can make calls, listen to music, etc. (After the pairing is successful, each time you turn on the Bluetooth phone, it will automatically pair with the mobile phone. If the Bluetooth phone or mobile phone has been paired with other Bluetooth devices during the period, you need to re-pair)

1. Incoming call operation: the Bluetooth phone is connected successfully, when the call comes in, the single-point answering icon will answer the call, and the single-point hanging up icon will hang up the call.
   

2. Music interface function: Bluetooth phone connection is successful, the watch can play mobile phone media music, control the volume up/down, play/pause, previous song, next song
   

6. Watch function mode

Main interface: (swipe up and down on the main interface to switch between different dials) date, time, week, battery,
Bluetooth status, steps, heart rate, week，After selecting the watch face, swipe left and right to enter the first-level function menu, first select the function you want to use.

Weather forecast: After the watch is connected to the phone, the current weather information will be displayed. If the connection is disconnected for a long time, the weather information will not be updated

Sports: Single-point sports icon to enter the sports mode, (sports mode includes running, mountaineering, walking, football, skipping and other sports modes) slide up to exit the sports mode.

Function selection interface: Swipe up on the main interface to enter the secondary function interface, single-click the function icon to enter, and slide up to exit

ECG watch local test: Wear the watch and connect to the mobile phone APP, click the ECG icon on the watch to start the
ECG test. During the test, place your hands on the table at the same height as your chest, and keep your middle finger tightly touching the ECG electrodes to keep calm until the test is completed ( As shown in the figure below), the ECG test takes about 1 minute. After the test is completed, the watch vibrates and prompts “APP View” and exits, then open the “SmartHealth” APP->enter the ECG interface -> click on the upper right corner to record -> pull down the phone screen After synchronizing the data, check the ECG AI auxiliary diagnosis. (The data is for reference only, not for medical use)

ECG phone APP test: Wear the watch and connect to the mobile phone APP, open the “SmartHealth” APP->Home->ECGtest->click to start the test. When testing, place your hands on the table at the height of your chest and your middle finger touches your heart tightly. Keep calm on the electric electrodes until the test is completed, save the data after the test is completed, and directly view the ECG AI for auxiliary diagnosis. (The data is for reference only, not for medical use)

Heart rate and blood pressure test: Single click heart rate / blood pressure icon to measure heart rate and blood pressure, the icon flashes as testing. The duration of the heart rate and blood pressure test is about 30S, slide up to exit (data is for reference only, not for medical use)
Information: Click the “Information View” icon to enter the information view, slide left and right to view the information, slide up to exit the.

Settings: Click the “Settings” icon to enter: APP QR code download, reset, brightness adjustment, raise the wrist to turn on the screen, power off and other operations, swipe up to exit

a. It is forbidden to throw this product into fire, so as not to cause explosion
b. This product is waterproof only for cold water, it may cause white fog in the lens when used for hot water
c. The battery life of this product varies with the usage environment and usage mode.

Disclaimer:

Warning: This product is not a medical device. The watch and its applications should not be used for diagnosis, treatment or prevention of diseases or illnesses. If you want to change your habits such as exercise and sleep, you must first consult with qualified professional medical personnel. In order to avoid serious casualties. Our company reserves the right to modify and improve any functions described in this manual without prior notice. At the same time, our company maintains the right to continuously update the product content. Please refer to the actual product for all content.

Warranty regulations:

1. The warranty period of this product is one year.
2. During the warranty period, the failure occurred under normal use according to the instruction manual (Determined by the official staff of the company), free repairs.
3. During the warranty period, if one of the following situations occurs, it must be repaired as a fee:

1. Cannot provide this guarantee and valid proof of purchase.
2. Failure and damage caused by misuse and improper repair by yourself.
3. Failure or damage caused by transportation, moving, or dropping after purchase.

4. Failure and damage caused by other unavoidable external factors.
5. Improper use causes damage to the equipment caused by water or other solutions.
6. Damage caused by using a power supply or voltage other than the specified one.
7. Only the above guarantees are made, and no other express or implied guarantees (including appropriate
   Marketability, implied guarantees for the rationality and adaptability of a particular application), no In terms of contract, civil negligence, or other aspects, the company does not treat any special Responsible for special, incidental or indirect damages.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>