VIVO V2050 V21 5G Smartphone User Guide

: June 6, 2024
: Vivo

Table of Contents

Welcome to vivo
Special Instructions
Product Standard Accessories
Appearance
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

V2050 Quick Start Guide
Please read this Quick Start Guide before using your phone, and keep it for future reference.

Welcome to vivo

This Quick Stan Guide tells you how to set up your phone and use its key features. For more detailed instructions, turn on your phone, then go to Settings > About phone > Customer service > Manual. You can also learn more useful information on vivo’s official website. For legal information, go to Settings > About phone > Legal Information. For the FCC ID of this phone, please go to Settings > About phone > FCC ID. The features and Images shown in this guide are for reference only.
They may differ from the actual product.

Special Instructions

Ambient Light Sensor & Proximity Sensor
The ambient light sensor and proximity sensor of this device are hidden on the lower right side of the receiver. To ensure the sensors function well, please keep them away from any dust, grease, or light-proof film. Using a third-party screen protector may cause the sensors to block alerts or lock screen nonresponsive to incoming calls, so you need to cut the film to expose the sensors.
Fingerprint sensor
A third-party screen protector might affect fingerprint recognition. Ensure that you use a vivo official screen protector with a customized design for the fingerprint sensor.

Product Standard Accessories

Cell phone x 1
Charger x 1
USB cable x 1
Phone case x 1
Earphone jack adapter x 1
SIM eject tool x 1
Warranty card x 1
Quick start guide x 1
Headset x 1

Appearance

Receiver
Ambient light sensor & Proximity sensor (hidden hole)
Front camera
Volume button
Power button
Fingerprint sensor (embedded in screen)
Speaker
USB port
SIM eject hole
SIM card tray
Main microphone
Secondary microphone
Rear camera le Rear flash
Front Flash (embedded in screen)

Optimum operating temperature is O’C to 35t and the optimum storage temperature is -20°C to 45C. Extreme heat or cold may damage your device or accessories.
5G WiFi statement
Operation in the band 5150-5350MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
FCC SAR
Head: 0.79 W/kg Body-worn: 0.94 W/kg ( 15mm distance ) Hotspot: 0.98 W/kg ( 10mm distance )
FCC statement
This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the vivo Mobile Communication Co.,Ltd. could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates. uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

SAR statement
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 15mm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and the use of such body-worn accessories should be avoided. Accessory available in the market and must be used to keep use distance 15mm from EUT to body-worn operation.

Version: V1.0 5199526 FXXX