CONRAD CAT200W Wi-Fi IP CCTV Camera Instruction Manual
- June 6, 2024
- CONRAD
Table of Contents
HD IP Camera Mobile Phone Operating Instructions
(Android / ISO scan code adaptive)
Computer client download address: http://www.p6scloud.com
I Download and install P6slite mobile APP
According to the type of mobile phone, download and install “P6slite” from IOS app store or Android app store, follow the prompts to complete registration and login “P6slite”, support third party login such as WeChat, QQ.
II Add camera
2.1 Account registration, login
User registration and login can be registered by mobile phone number (currently only in Chinese mainland), email registration (please use real email address to retrieve password later), or you can log in by WeChat or QQ.
2.2 Add a new device process
To add a new camera, you need to restore the camera to the initial state. Press and hold the reset button for about 5 seconds to return to the initialization state. Wait for the camera to power on (30 seconds after power- on) to start the set-up network.
2.2.1 Android phone connection method: connect WIFI through device AP
hotspot
First connect the mobile phone to the router’s WIFI network (please connect
the phone to 2.4G WIFI, the camera does not support 5G WIFI)
2.2.1.1 Click on the login APP “P6slite”, click the add button “+” in the
middle or upper right corner of the device list.
2.2.1.2 Select AP set-up network
2.2.1.3 Select the AP hotspot device beginning of
ZWAP_NG-73-CE*(Enter the device AP hotspot password: 01234567),
After clicking, it will show the hotspor is connecting (countdown 60 seconds,
semi-transparent content display at the bottom of the screen: connected to the
WLAN network” ZWAP_NG-73-CE*”).
2.2.1.4 Jump to the WIFI setting page (the device is connecting to WIFI),
according to the list of wireless networks displayed on the current page
select the WIFI network to connect.
2.2.1.5 Enter the WIFI password, click Confirm, you will hear “WIFI is
connecting, please wait ….network connection successful”
2.2.1.6 “Set device WIFI information successful” appears on the APP screen, click confirm, you will see the device in the device list.
2.2.1.7 You can watch the video of the device.
2.2.2 Connection method of Apple mobile phone: Connect WIFI through
device AP hotspot:
2.2.2.1 Open the mobile phone WIFI list, find the AP hotspot device
beginning of ZWAP_NG-73-CE***, connect the mobile phone to the
hotspot.
2.2.2.2 Enter the device AP hotspot password: 01234567
2.2.2.3 Open the APP “P6slite”, Click the local mode in the lower left
corner of the APP login page. You will see the connected device in the device
list.
2.2.2.4 Click the device’s setting button to jump to the setting page (the device is about to connect to WIFI)
2.2.2.5 Click “More” – select WIFI setting.
2.2.2.6 According to the list of wireless networks on the current page,
select the WIFI network to be connected.
2.2.2.7 Enter the WIFI password, click confirm, you will hear “WIFI is
connecting, please wait …. network connected successful”.
2.2.2.8 “Set device WIFI information successful” appears on the APP
screen. Click confirm
2.2.2.9 You can see the device on the APP device list page, then you can
watch the video.
III. The button function introduction
3.1 Not subscribed: One-click to open the push (image send to mailbox +
mobile phone), it shows not subscribed when the push function is off , you
need to set the corresponding option in the alarm setting when you need to
open this function (as the images show below);
Subscribed: One-click to close the push (do not send image to mailbox + mobile
phone), it shows subscribed when the push function is on.
3.2 Playback: Click to enter the video playback page (with TF card and video recording), drag the timeline to view the video in different time periods (blue for regular recording / purple for AI human detection video / yellow for motion detection recording), And you can select the playback time to retrieve, play back screen-shots and download to the mobile phone (MP4 format) and other functions, after playback, you can directly click “ live ” to the preview page.
3.3 Remote image: You can enter the push image page with one click, and select the time to preview the corresponding push image.
3.4 Setting: One-click to enter the device parameter setting menu.
IV. Setting menu
4.1 Set the camera device name: customize the naming according to the
user’s habits and the location of the camera, for example “living room”,
“gate”, “parking lot”, “checkout counter”, ” store door”, etc.( Name should be
no more than 54 characters ).
4.2 Username: default is admin
4.3 Password: Support letters+ numbers combination (default is empty /
maximum support 16 characters)
4.4 DID: DID number and QR code of the current device (for face-to-face
sharing, etc.)
4.5 Status: Device online or offline status display
4.6 Password setting: set or change the device password (the default
password is empty)
4.7 Video setting: main stream/sub-stream ,stream type, video encoding,
resolution, frame rate, rate control and picture quality setting
4.8 Audio setting: Monitor Input / Speaker Output Volume setting
4.9 Alarm setting: motion detection and sensitivity, trigger email,
trigger SD card snapshot, trigger SD card recording, trigger FTP, linkage
push, voice alarm, detection area, detection time setting
4.10 Alarm snapshot: snapshot number of images (default 3)
4.11 Human detection: motion detection, human tracking, sensitivity,
trigger mail, trigger SD card snapshot, trigger SD card recording, trigger
FTP, linkage push, voice alarm, detection area, arming time setting
4.12 Voice alarm: siren linkage setting
4.13 Email setting: support QQ, Yahoo, Google, Hotmail, Netease, Sina and
other mailbox setting
4.14 FTP setting: FTP Account setting (For upload audio and video data)
4.15 Record setting: HD/SD, timer/alarm/motion/human detection/disable/
record time setting
4.16 Timing capture: save picture to SD card, SD card capture interval,
save picture to FTP, FTP capture interval setting, etc.
4.17 OSD setting: Image OSD, Channel Name/Display Time – On and Off
setting
4.18 WIFI setting: display WIFI list and network status (support switch
to any WIFI network at the current environment)
4.19 SD card setting: display the total capacity, available capacity and
status of the SD card, formatting setting
4.20 Mirror setting: mirror mode (open only when mounted on the ceiling)
4.21 IR-CUT setting: IR-CUT mode, sensitivity, switching time, IR-CUT
reverse, IR-CUT infrared light setting
4.22 Time setting: mode selection (sync to phone time), device time zone,
device time – sync setting
4.23 System setting: Restore to default setting, restore to factory
setting, reboot system
4.24 About device: device ID, device model, firmware version, network
type, IP address, MAC address, subnet mask, gateway, DNS setting
4.25 PTZ speed: 1-10 (default is 5)
V. Q&A
5.1
Q: When adding a device, the password is incorrect or the password set after
the last connection is forgotten.
A: The device may have a password or has been changed, or reset the password.
Please press the “Reset” button of the device (using the U-shaped pin) for 5
seconds. The device voice prompts “Reset successful”, indicating that the
device password is reset successfully, follow the steps above to re-add the
device.
5.2
Q: The device list is prompted the device is offline
A: Please check if the device is connected to the network. Please check if the
phone is connected to the device and router in same network.
5.3
Q: What should I do if the mobile APP does not receive the push?
A: Please check if the push function is turned on (displayed as subscribed to
open), whether there is open alarm push linkage (setting – alarm setting)
5.4
Q: When playback video can not find video files
A: Please check if the SD card is damaged, whether there is an SD card
installed, check the device time, check whether the playback time is correct.
5.5
Q: The device cannot connect to WIFI
A: Please check whether the distance between the device and the router is too
far, whether the mobile phone correspond to the hotspot of the current device,
whether the router have the DHCP function enabled, whether the connected WIFI
is 5G (the device does not support 5G, only supports 2.4G), and whether the
router opens the anti-mite network function, so that filtered device.
VI Get more information
This quick operation guide will help you to use your wifi camera quickly. If you need more information, you can download a detailed user guide or seek technical support from the manufacturer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>