XRH NEW ENERGY 280Ah Life Lithium Battery Instruction Manual

XRH NEW ENERGY 280Ah Life Lithium Battery

Product Information

Specifications:

• Model: 24V 280Ah LiFePO4
• Appearance: 25.6V 280Ah
• Voltage Range: 25.6V – 28.4V
• Weight: 47KG/103.6LB
• Energy Capacity: 7160Wh
• Continuous Discharge Current: 200A
• Continuous Charge Current: 200A
• Max. Pulse Discharge Current (10s): 5120W
• Protection Rating: IP65
• Dimensions: L640W245H220 mm / L25.2W9.65H8.66 inches
• Contact Email: service@xrh1123.com

Product Usage Instructions

Charging the Battery:
To charge the battery, follow these steps:

1. Ensure that the battery is connected to the appropriate charging equipment.
2. Set the charging equipment to the recommended voltage range of 25.6V – 29.2V.
3. Connect the charging equipment to the battery using the provided M8 connector.
4. Monitor the charging process and ensure that the battery voltage stays within the recommended range.
5. Once the battery reaches its desired charge level, disconnect the charging equipment.

Discharging the Battery:
To discharge the battery, follow these steps:

1. Ensure that the battery is connected to the appropriate device or load.
2. Monitor the battery’s voltage and current to ensure that it stays within the specified limits.
3. Avoid discharging the battery below 20% of its capacity to prolong its lifespan.

Storage and Maintenance:
Proper storage and maintenance can help extend the lifespan of the battery. Follow these guidelines:

• Store the battery in a cool and dry place with a temperature range of -10°C to 30°C.
• Avoid exposing the battery to extreme temperatures, moisture, or direct sunlight.
• Regularly check the battery’s voltage and recharge it if necessary to prevent deep discharge.
• Clean the battery terminals regularly to ensure good electrical connections.

Frequently Asked Questions (FAQ)

• What is the maximum continuous discharge current of the battery?
  The battery can continuously discharge at a current of 200A.

• What is the recommended charging current for the battery?
  The recommended charging current is 60A (0.2C) for optimal performance.

• What is the energy capacity of the battery?
  The battery has an energy capacity of 7160Wh.

• Can I use this battery in outdoor environments?
  Yes, the battery has an IP65 protection rating, making it suitable for outdoor use.

• How can I contact customer service for this product?
  You can contact customer service by sending an email to service@xrh1123.com.

Appearance

PRODUCT INTRODUCTION

• LiFePo4 Battery 25.6V 280Ah
• Nominal Voltage 25.6V
• Charge Voltage 28.4V-29.2V
• Weight 47KG/103.6LB
• Energy 7160Wh
• Max Charging Current 200A
• Max Discharging Current 200A
• Recommend Charge Current 60A(0.2C)
• Max Load/ Inverter Power 5120W
• Operating Temperature Range
  • Charge 0°c ~so0C(32°F~ 122°F)
  • Discharge- °C~60°C(-4°F~140°F)
  • Storage -10°C~S0°C(-14°F~122°F)
• Waterproof Class IP65
• Terminal Type M8
• Demension
  • L640W245H220 mm
  • L25.2W9.65H8.66 inchs

ADVANTAGE

• Mobile with carry handles makes it easy to lift and move around.
• With battery management system enclosed, need no extra wiring.
• Built with LiFeP04 battery cells that are engineered to deliver superior performance & longevity.
• Battery voltage stays above 12.SV at 90% discharged.
• Maintenance Free; Non spill.
• Perfect replacement or upgrade for a traditional lead-acid battery.

WARRANTY POLICY

We provide a five-year warranty for all batteries. Our five-year battery warranty includes the following privileges, if used correctly according to the manual :

• We will assist in analyzing the customer’ s problem within 24 hours, help solve the problem, restore battery usage, and introduce the best use method.
• If the problem cannot be resolved, we will send a new battery to replace the defective battery.And the defective battery needs to be returned to our warehouse, will be inspected and tested by our technical team.
• service@xrh1123.com

CHARGING TIPS

• About Charging Voltage
  • Based on the characteristics of Lithium Iron Phosphate (LiFeP04) batteries, the voltage measured by all LiFeP04 batteries during is not the real voltage of the battery.
  • Therefore, after charging and disconnecting the battery from the power source, the voltage of the battery will gradually drop to its real voltage.
  • If you need to test the real voltage of the battery, please charge and disconnect the power supply and test its voltage after putting it aside for over 15 mins.
• Charging Methods
  • Scheme 1: You can use a lithium iron phosphate 8-string (29.2V) charger to charge the battery pack.
  • Scheme 2: You can use photovoltaic solar panels to charge the battery through MPPT.
  • Scheme 3: You can use the inverter to charge the battery pack (note: the inverter needs a built-in AC to DC charging function)
• Battery Charger
  • Use 29.2V lithium battery charger to maximize the capacity.
  • Recommend Charging Voltage: Between 28.4Vto 29.2V.
  • 24V 280Ah Recommend Charging Current:
  • 60A(0.2C) The battery will be fully charged in around 5 hrs to 100% capacity.
  • 85A(0.3C) The battery will be fully charged in around hrs to 97% capacity.

If you use an inverter (MPPTI to connect our battery pack, please refer to the following data:
The MPPT settings ofthe 25.6V lithium iron phosphate battery are as follows:

• Charge
  • Charging limit voltage :29.2V
  • Overvoltage disconnection voltage : 30V
  • Overvoltage reconnection voltage : 28.4V
• Discharge
  • Low voltage disconnection voltage : 21.6V
  • Low voltage reconnection voltage: 23.2V
  • Undervoltage warning voltage: 24.8V

STATE OF CHARGE(SOC}
The battery capacity could be roughly estimated by its voltage. As there are subtle differences in the voltage of each battery, below parameters are for reference only. The voltage needs to be tested at rest (with zero current) after 15mins of disconnecting from charger& loads.

LONG-TERM STORAGE

• The battery can be operated in temperature of-20° C to 60° C, and a temperature between 10°c to 35°C is ideal for long-term storage.
• Store in a fireproof container and away from children.
• For a longer-lasting product, it is best to store your battery at 50% charge level and recharge every three months if it is not going to be used for a long period of time.

CONNECTION TIPS

Premise of Connection: To connect in series or/ and in parallel, batteries should meet below conditions:

1. The same battery capacity (Ah);
2. From same brand (as lithium battery from different brands has their special BMS);
3. Purchased in near time (within one month).

About connected in parallels and in series
Our LiFePO4 batteries can be connected in parallels and in series for larger capacity and higher voltage. We suggest that the Max connection in series is: 2 pcs batteries to 48V, the Max connection in parallels is: it can connect multiple batteries, and no more than 10 pcs in parallel. Products of different manufacturers cannot be connected in series or in parallel. When the batteries are used in parallel or series, the voltage must be the same.

• Please refer to the following picture for series connection

• **Please refer to the following picture for parallel connection

**

Two Necessary Steps Before Connecting:
These two steps are necessary in order to reduce the voltage difference between batteries, and through these, the battery system can perform the best of it in series or/ and in parallel.

• Step1.
  Fully charge your batteries separately.

• Step2.

  • Connect your batteries one by one in parallel, and leave them together for 12~24hrs.
  • And then, you can connect your batteries in series or/ and in parallel.

About Our Battery’s BMS

The unique built-in battery management system (BMS) of our product’ s lithium battery can protect it from overcharge, deep discharge, overload, overheating and short circuit, and low self-discharge rate. Our BMS has a high temperature disconnect function. When the internal temperature of the battery reaches 75 °C (167 ° F), It will automatically disconnect to protect the battery. With overcharge and overdischarge protection functions, when the overcharge voltage exceeds 30V or the overdischarge voltage is lower than 17.6V, the battery will automatically disconnect. Our recommended charging voltage and discharging voltage are 28.8 ± 0.4V and 20V ± 0.4V, respectively. If the charging voltage is lower than 27.6V, the battery power (with a deviation of 1-2%) cannot be fully charged.

HOW TO ACTIVATE THE BATTERY WHEN BMS CUT IT OFF FOR PROTECTION?

1. If the BMS has cut-off the battery for protection, you need to cut off the load of the battery and put the battery aside for 30mins. Then the battery will automatically recover itself to normal voltage and can be used after fully charged.
2. If the battery is unable to recover itself and its voltage is too low to hold a charge, you can activate it in below two ways:
3. Use the charger with OV charging function (it can charge the battery starting from OV) to charge the battery. After fully charged, the battery can be used normally.
4. Use another 24V lithium battery to connect in parallel with the battery for a minute to activate the battery (lead-acid battery with voltage more than/equal to 24V and less than/equal to 29.2V will also work). After that, fully charge the battery and it can be used normally.

PRECAUTIONS

• When recharging, use the LiFeP04 battery charger specifically for that purpose.
• Do not strike battery with any sharp edge parts, such as Ni-tabs, pins and needles.
• Do not immerse the battery in water and seawater.
• Do not use and leave the battery near a heat source as fire or heater.
• Do not reverse the position and negative terminals.
• Do not connect the battery to an electrical outlet.
• Do not discard the battery in fire or heat it, Do not bend tab.
• The battery tabs are not so stubborn especially for aluminum tab.
• Do not short-circuit the battery by directly connecting the positive and negative terminal with metal object.
• Do not transport and store the battery together with metal objects such as necklaces, hairpins etc.
• Do not directly solder the battery and pierce the battery with a nail or other sharp object.

DISCHARGE CURVE

• **Different Rate Discharge Curve( 25°C)

**

• **Different Temperature Discharge Curve( 0.5°C)

**

• **State Of Charge Curve( O.SC, 25°C)

**

• **Charging Characteristics( 0.SC, 25°C)

**

• **Different DOD Discharge Cycle Life Curve( o.s0c)

**

• **Different Temperature Self Discharge Curve

**

APPLICATION

• RV, Camper, Trailer, Caravan, Camping Truck, Bus etc.
• Solar System+ Wind Power System
• Home Energy System
•  Boat& Fishing
• Wireless Lawn Movers, Vacuum Cleaner& Washing Machine
• Portable Video Camera& Portable Personal Computer
• Car Audio System
• Light Equipment
• Emergency Lighting Equipment
• Fi re Ala rm& Security Systems
• Electric Equipment& Telemeter Equipment Portable
• Toys& Consumer Electronics

WEB

• www.xrhnewenergy.com
• service@xrh1123.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>