tgs A10U Dorne Aluminum Bluetooth Speaker Instruction Manual

: June 6, 2024
: tgs

Table of Contents

Functions:
Tech Specifications
Instructions:
SAFETY PRECAUTIONS:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Dorne Aluminum
Bluetooth Speaker
Instruction Manual
A10U

Functions:

ON/OFF Switch
Microphone
Mode Button
Vo–/Previous Track
Play/Pause/Phone
Vol+/PreviousTrack
Micro USB Port
AUX Port
USB Port
SD Card Port

What’s included:
1 x Speaker (7198-67)
1 x (2 in 1)Micro-USB charging Cable / 3.5mm Aux Cable
1 x Instruction Manual

Tech Specifications

Playing time: up to 2 hrs at max volume
Charging time: up to 4 hrs
Pairing Name: “Metal Speaker”

Instructions:

(Be sure to fully charge the speaker before using for the first time).

Charging the Speaker
• Conned the provided charging cable to a power source and to the micro USB port on the speaker (6).
• The LED indicator light will glow red when charging and turn off when fully charged.
BluetootheSetup:
• Side the (1) “ON/OFF” right to power on When pairing, the BLUE light will blink,
• look for “Metal Speaker” on your Bluetooth device and select it to pair with device. Once pairing is successful the blue light
• will remain illuminated.
Playing Music:
• Short press (5) “Play/Pause/Phone key to pause music. A second short press will resume playing music again.
• Short press (4) “The previous trackNol-“, the speaker will play the previous track.
• Long press to reduce speaker volume.
• Short press (6) ‘Next trackNol+”, the speaker will play the next track.
• Long press to increase speaker volume,
AUX Function:
• The provided 2 in 1 Micro-USB charging/aux cable needs to be used for Aux Mode. Plug the provided Micro-USB into the speaker and the 3.5mm Aux into the mobile device, press the Mode Button(3), now you can enjoy the audio.
Call Function:
• Short press “>0″ (5) to answer an incoming call, press again to end the call.
• Press and hold to reject the call.
• Long press”>II” to redial last called the number from the speaker.
SD card function:
• Find the SD card port (10)
• Insert the SD card to enjoy the music
FM MODE:
• Press and hold, the mode button to enter FM Mode
• -Play/Pause/Phone”: scan stations
• Vol+/Previous Track” to scan forwards
• Vol-/Previous Track”: to scan backward

SAFETY PRECAUTIONS:

• WARNING-When using this product, basic precautions should always be followed

Read all the instructions before use.
Never store or use this product in temperatures below 32°F(O’C) or above 115°F(45°C).
The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles
To reduce the risk of injury, close supervision is necessary when the product is used near children
Do not expose the device to moisture
Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
Do not use the device if damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause an explosion
Ensure that qualified service professionals use only identical replacement parts to ensure product safety

FCC Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment general uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception. vvti is can be determined by turning the equipment off
and on. the user is encouraged to try to correct the inter( erence by one more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Foorratipffthe dealer or an experienced radio/TV technician This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions (1) thi device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limns set forth for an uncontrolled enwonmem. This equipment should be installed and operated with a minimum distance 5mm between the radiate. S your body

MADE IN CHINA