FaLKK FKEX-808 Nightstand Ipanema Instruction Manual
- May 15, 2024
- FaLKK
Table of Contents
FaLKK FKEX-808 Nightstand Ipanema
Product Specifications
- Model: NIGHTSTAND IPANEMA 2GV
- Dimensions: 0.50m
- Model Number: FKEX-808
Product Usage Instructions
Assembly Tools Required
- Philips Screwdriver
- Hammer
- Power Drill
Cleaning Instructions
- Avoid using chemicals or abrasives for cleaning.
- Use a cloth slightly dampened with water followed by a dry cloth.
Mounting Instructions
- The module must be mounted on a soft surface.
- It is recommended to use the box for mounting.
Step-by-Step Assembly
- Start by assembling the Top Base and Bottom Base.
- Attach the Right Side and Left Side to the base.
- Connect the Coast pieces to the assembled structure.
- Continue with the assembly of other components following the provided diagrams.
FAQ
- Q: Can I use any other tools for assembly?
- A: It is recommended to use the specified tools for proper assembly to avoid any damage to the product.
- Q: How do I ensure stability when assembling the nightstand?
- A: Make sure to follow the assembly instructions carefully and use the Anti-Tipping Kit provided to ensure stability.
Before starting assembly, make sure you have received all the components and parts for the product.
For assembly, we suggest hiring a professional.
ASSEMBLY INSTRUCTIONS
Required Tools
Module Components
Drawer Components
Module Parts
- 1: Top Base (1x)
- 2: Botton Base (1x)
- 3: Right Side (1x)
- 4: Left Side (1x
- 5: Coast (2x)
- 100: Foot (4x)
- 103: Bottom Connector(1x)
- 101: Foot Crosspiece (2x)
Drawer Parts
- 50: Left Side Drawer (2x)
- 51: Right Side Drawer (2x)
- 52: Drawer Bottom (2x)
- 53: Drawer Base (2x)
- 54: Drawer Front (2x)
- 2: Units
Installation Instructions
Module pre-assembly
Left
Right
Left
Right
Top
Botton Base – Drawing conference
Coast
Top Base + Left Side
Top + Left Side + Right Side
Top Base + Left Side + Right Side + Botton Base
- Use the key Allen to fix the lower base on the sides.
Bottom Connector
Check the coast square
Mounting of coast
- Note the amount of nails needed.
Board and feet
- Align screws with holes and use your strength to screw.
- Glue application on the front of the drawer
- Check the drawer square
- Note the amount of nails needed.
- Anti tipping kit- Follow the product manual
Before using the drawer, let it dry for 4 hours.
Finished
Serious or fatal crushing injuries can occur from the tip-over.
To reduce the risk of furniture tip-over:
- ALWAYS install the tip-over restraint provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb or hang on drawers, doors or shelves.
- NEVER open more than one drawer at a time.
- Place the heaviest items in the lowest drawers.
This is a permanent label. Do not remove!
Read User Manual Online (PDF format)
Loading......