vivo V2066 Smartphone User Guide
- June 6, 2024
- Vivo
Table of Contents
vivo V2066 Smartphone featured
Welcome to vivo
This Quick Start Guide tells you how to set up your phone and use its key
features. For more detailed instructions, tum on your phone, then go to
Settings > About phone > Customer service > Manual. You can also learn more
useful information
on vivo’s official website. For legal information, go to Settings > About
phone > Legal information. For the FCC ID of this phone, please go to Settings
About phone > FCC ID. The features and images shown in this guide are for reference only. They may differ from the actual product.
Special Instructions
Ambient Light Sensor & Proximity Sensor
The ambient light sensor and proximity sensor of this device are hidden on
the lower right side of the receiver. To ensure the sensors function well,
please keep them away from any dust, grease or light-proof film. Using a
third-party screen protector may cause the sensors blocking alert or locked
screen nonresponsive to incoming calls, so you need to cut the film to expose
the sensors.
Fingerprint sensor
A third-party screen protector might affect fingerprint recognition. Ensure
that you use a vivo official screen protector with customized design for the
fingerprint sensor.
Product Standard Accessories
- Cell phone x 1
- Chargerx 1
- USB cable x 1
- Phone case x 1
- Earphone jack adapter x 1
- SIM eject tool x 1
- Warranty card x 1
- Quick start guide x 1
- Headsetx 1
Optimum operating temperature is o•c to 35•c and optimum storage temperature is -2o·c to 45•c. Extreme heat or cold may damage your device or accessories.
Appearance
- Receiver
- Ambient light sensor
- front camera
- volume button
- power button
- fingerprint sensor
- speaker
- USB port
- Sim enjet hole
- Sim card tray
- main microphone
- secondary microphone
- rear camera
- front flash
- rear flash
5G WiFi statement
Operation in the band 5150-5350MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems.
FCC SAR
- Head : 0.79 W/kg
- Body-worn: 0.94 W/kg ( 15mm distance)
- Hotspot: 0.98 W/kg ( 10mm distance)
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the vivo Mobile Communication Co.,Ltd. could void the use~s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR statement
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The SAR limit set by the FCC is 1.6W/Kg. For bodyworn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an acoessory that contains no metal and positions the device a minimum of 15mm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn acoessory should be avoided. Accessory available in market and must be used to keep use distance 15mm from EUT to body-worn operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>