vivo Y72 Smartphone User Guide

vivo Y72 Smartphone

Introduction to phone exterior

Introduction to keys and widgets

• (4) Ambient light sensor & Proximity sensor: Automatically detect the intensity of the ambient light, and adjust the brightness of the screen with the ambient light.
  When making phone calls, this sensor automatically detects the distance between you and your phone. If you’re too close to your phone, it will switch off your screen to avoid unintentional triggering of certain functions. The sensor is inactive in headset and handsfree mode.
  It is normal for the light at the top of the screen to flash briefly when dialing or calling. This indicates the screen’s infrared is working.

• (5)Volume button: You can adjust the volume using the volume button.

• (1)Front camera/(8)Rear camera: You can take photos and record videos.

• (2)Receiver: You can hear the caller through the receiver when on the phone.

• (6)Power button: Long press the Power button in power off mode to turn on the mobile phone. Long press the button in boot mode to turn off the phone or reboot the phone.
  Note
  When the phone can not be used normally, simultaneously long press [Power button] and [Volume button-] more than 10 seconds to force the device to restart .

• (7)Fingerprint sensor: The button has the fingerprint recognition function, which can be used to unlock the phone instead of the password.

• (15)Card tray: Install/Remove the cards.

• (16)Pin port: Insert the pin into the pin jack on the side body, and press it inwards to eject the card tray.

• (3)Secondary microphone/(9)Main microphone/(14)Third microphone: Transfer sound when you make calls.

• (12)Rear flash: Flashlight source.

• (11)Speaker: Playing sound.

• (10)USB port: You can connect headphones, computers, chargers and other devices here.

• (13)Color temperature sensor: Assists in adjusting photo effects.

Installation and Preparation

Procedure for installing SIM
This phone supports hot swapping of Nano card (SIM1/SIM2). When the phone is on, it can automatically recognize a Nano card (SIM1/SIM2) when you plug the card in.
This phone supports Nano card (SIM1/SIM2).

1. Insert the pin into the SIM pin port on the side body, and press it inwards to eject the SIM card tray; Remove the card tray.
2. Make the metal face of the Nano card (SIM1/SIM2) card face downward, with the oblique angle corresponding to that of card tray. Put the Nano card (SIM1/SIM2) card into the card slot according to the direction indicated by arrows of the diagram.
3. Touch screen facing up, follow the direction of the arrow to install the tray (with Nano card ) into the phone.

Note

1. Due to different needs across countries, some phones may be single or dual SIM. The instructions do not cover every difference between models.
2. The back cover is not removable, so as not to damage the machine.
3. Put SIM/SD card into card tray, then mount card tray into the phone. It is forbidden to insert SIM/SD card to the phone directly.
4. You are suggested not to cut your SIM card by yourself. If the Nano card (SIM1/SIM2) does not match, please go to the carrier to change a standard Nano card.
5. The phone uses a “Dual card dual standby single-pass” design, with means the two card in the phone cannot be used in the same time for voice service nor data connection service. When one of the two cards is in voice communication, the other card cannot be used to answer any calls. If there is an incoming call to the other card, the caller may hear messages such as “The number you called is not at service”, “The subscriber you dialed can not be connected for the moment, please redial later”. When one of the two cards is in data connection state, the other card can use the data connection service. For this reason the above phone 11 Dual card dual standby single-pass” design caused, regardless of the operator’s network status. Single-channel is adopted because the phone uses single-chip design, which can significantly improve the battery life and energy efficiency. The user is encouraged to consult local operators to enable services like “Missed call reminder”, “Incoming call reminder” and “Secretarial service” to avoid the issue of missing calls without alerts under the aforesaid conditions.

Connect headphones
Plug the headphone plug into the headphone jack on the phone, ensuring that the headphone plug is fully inserted.

Charge phone
Insert one end of the data cable into the USB port on the phone and the other end into the charger or a compatible device. The phone will start to charge. After charging is complete, disconnect the phone from the charger or the compatible device and remove the charger from the socket.
Note
Please use the data cable and charger that came with the phone.

Antenna
This phone is equipped with a built-in antenna. Please do not touch the antenna when it is transmitting or receiving signals. Touching the antenna may affect communication quality, cause the phone to operate using a power level higher than needed as well as shorten the battery life. The antenna is located inside the circle marked with dotted lines. Please do not cover this area when holding the phone, as shown in the picture below:
A. Wi-Fi antenna; B. GPS antenna; C/D/E. Communication antenna.

Note
The pictures used in these instructions are for reference only and may differ from your phone. Please be subject to your phone.

Screen lock and unlock

The phone will lock automatically after being idle for a certain time. You can set the duration of auto lock. You can also tap the [Power button] to lock the screen manually.

Status bar icons and notifications

Meaning of status icons

the status bar at the top of screen provides come basic status information of the phone including signal strength system and battery power

Note
Network symbol is displayed to indicate current operators and network settings. The SG icon is for illustrative purposes only and can only be shown on SG network supported mobile phones.

View notifications
When you receive a new event notification, its content will be displayed on the status bar. You can slide down the status bar and tap the notification to view details.

Shortcut Center on the home screen

You can swipe down from the top of the screen to reveal the home screen shortcut center.
In Shortcut Center, you can tap an icon to quickly turn on/off the function corresponding to that icon.

Home screen editing

As more applications are installed, the number of your screens increases automatically. You can slide from left to right or right to left to switch between screens.

Edit home screen layout

1. Move: Hold down the application or widget and then drag it to the desired location. To move it to another screen, drag it to the screen.
2. Merge: Hold down the application, drag it on top of another application and release finger. The two applications will be merged into a folder. You can continue to drag other applications to the folder.
3. Tap the folder to expand it and then tap the folder name to rename it. You can also adjust the layout of apps in the folder.

Settings

Wi-Fi

Connected Wi-Fi
You can enable or disable Wi-Fi under “Settings > Wi-Fi”. Choose a network connection after
enabling Wi-Fi. If a Wi-Fi network is encrypted then lock wifi is displayed and you need to enter the password. When your phone is connected to a Wi-Fi network, the signal strength of the Wi-Fi network  wifi will be displayed in the status bar at the top of the screen. The more bars you see, the stronger the signal. If there is no Wi-Fi network available, or you have disabled Wi- Fi, your phone will try to connect to the Internet via a cellular data network. Once your phone is connected to a Wi­Fi network, it will connect to the network automatically when in range.

Add network
If you want to add a Wi-Fi network that is not in the list of available networks, please choose “Add network and enter networkname. You need to know the network name, password and security type before connecting to it.

Advanced
For advanced settings on a Wi-Fi network, you can tap “Advanced”.

Mobile network

You can set the current network usage status under “Settings > Mobile network”.

Data network
When the cellular data connection is activated, you can use network-related applications such as Browser and Email via a data network. Your operator may impose charges on the service, please consult your operator for more details.

SIM card info and settings

1. SIM1/SIM2: You can modify the settings of SIM1/SIM2 in “Dual SIMs and Mobile Network” interface after you put to SIM cards in the phone. After startup of the device, both cards can stand by.
2. Network Mode: You can choose different network mode based on the type of SIM card.
3. Data roaming: With this feature enabled, you can connect to data service when in international roaming. Please be aware that enabling data roaming may cause considerable roaming charges.
4. Carrier: When you are out of range of your SIM card carriers, you can only make calls via local carriers that have roaming agreements with your SIM card carriers. You can set available carriers here. You may need to pay extra fees for the mobile services provided by these carriers.
5. Access point name(APN): You can set APN based on the type of you SIM card. Usually these features does not need your setting, as they are defaulted before delivery. If your SIM card has enough money loaded, then you can use these features out of box; you can connect to the Internet soon as you enabled the “Data network” feature. If you by accident have the features incorrectly set or the APN removed, all you need is simple tap “Reset to default”. Cellular data networks may vary depending on the type of SIM card. Please choose the proper APN based on the local traffic plan. Please consult the network operator for details.
6. Edit SIM: Tap Edit SIM” to edit the name of SIM card.

Other Networks and Connections

• Airplane mode

1. In the “Settings>Other Networks and Connections” interface, you can enable or disable the “Airplane mode”.
2. You can swipe down from the top of the screen to reveal the home screen shortcut center. Then you can tap the “Airplane mode” to enable or disable this function.  

Note
Open the “Airplane mode” can save battery power.

• Personal Hotspot

1.  **Hotspot configuration:** You can manually change the default network, security and password settings (You are recommended to keep the default settings).
2.  **Data limit per use:** you can set the network single data limit.
3.  **Number of connections allowed:** you can set the number of network allowed to connect.
4.  **Other sharing mode:** Share phone network via Bluetooth/Share phone network via USB, please refer to “Help” to check the specific operations.

• VPN
  An organization’s internal VPN allows you to communicate private information securely over a public network. For example, you may need to configure a VPN to access your work emails. You can tap ” VPN ” to configure the VPN.

• Bluetooth
  You can then send data including files, contacts, pictures and music via Bluetooth.
  

• Smart Mirroring

1. Local file mirroring: This function allows you to mirror media files on your phone to be played on your device.
2. Screen Mirroring: Content on your phone screen can be displayed on your device synchronously. You can directly touch the screen controls on your phone to proceed.

Notification and status bar

Enter “Settings >Notification and status bar” interface, turn on the switch, and relevant prompts will be showed on the status bar.

Display and Brightness

You can adjust the system settings such as screen brightness, auto-lock time of the phone.

Note
You must enable network access on the phone before using some functions.

Home screen, lock screen and wallpaper

You can adjust the detailed settings of the phone’s lock screen, home screen, and wallpaper.

Lock screen settings
You can use the built-in lock screen styles or download new styles that you like.

Home screen settings
You can adjust the detailed settings related to the home screen (such as Circular sliding screen and Dynamic icon).

Theme/Wal lpaper
You can use the built-in themes/wallpapers or download and use new themes/wallpapers that you like.
Note
You must enable network access on the phone before using some functions.

Dynamic Effects

A variety of animation styles are provided under the corresponding feature. You can select and apply your favorite style.

Sound and vibration

You can set your preferred sounds profile in “Settings >Sound and vibration”.

Jovi

You can go to a function from the Jovi interface and learn the usage of each function or adjust the detailed settings of some functions to your preference.

System navigation

Selecting “Navigation gestures” will hide the navigation keys; selecting “Navigation keys” will show the navigation keys. You can set the navigation key according to your preference at “Settings >System navigation”.

Fingerprint, face and password

Fingerprint

1. Fingerprint used for Unlock: After set up lock screen password and added a fingerprint, open “Unlock”, in the lock screen, put the finger which you entered fingerprint on the fingerprint recognizer to unlock, you can also draw the unlock pattern or enter the password to unlock.
2. Fingerprint used for Privacy and app encryption: After set up lock screen password and added a fingerprint, open “Privacy and app encryption” by verifying password.
3. Add a Fingerprint: Click on “Add a Fingerprint”, according to the screen prompts to collect fingerprint, after the completion of fingerprint input, you can click “OK”.

Face

1. Use face for Unlock: Set the lock-screen password, add your face image, and activate “Unlock”. Face the front of the locked phone to unlock it.
2. Face recognition for privacy and app encryption: After setting a lock screen password and adding a face, turn on “Privacy and app encryption”. You can enable this function after the privacy password is verified.
3. Add a face: Click on “Add a face “, according to the screen prompts to collect face, after the completion of face input, you can click “OK”.

Privacy and app encryption
Follow the on-screen prompts to set or change password. Once you’ve set up your password, open the app that you want to encrypt in the app encryption list, and when you’re done, you need to enter the password to launch these apps.

Ultra Game Mode

You can add games to Game Box manually so they can use Game Box functions. Tap the add button to select games.

Shortcuts and Accessibility

• Smart Split
  The split screen makes you handle two apps easily at the same time. On the interfaces of some apps, an incoming message will show as a floating icon. Tap the icon and the screen will split into two, and the two apps will display at the same time.

• Smart motion
  You can go to “Smart motion” to configure the smart motion. Ways to check Smart motion: Click menu button, refer to pop-up feature tips.

• Smart click
  Open “Smart click”, when the screen goes black, press and hold [Volume buttons-] to open self­customizable feature, this setting can’t be used while the music is playing .

• Easy Touch
  When “Easy Touch” is enabled, you can adjust the detailed settings as you like.

• Task timer
  You can make detailed settings for “Task timer” in” Task timer”. When you have set “Scheduled power on/off”, your phone will turn on or off at the set time. When the set time has been reached, your phone will ask you to confirm whether you want to power off. You can choose “Cancel” to stop the phone from turning off. If no specific instructions are received, the phone will turn off after 60 seconds.

• One-handed
  You can go to “One-handed” to configure this function. You can tap the switch to select whether to display one handed interface for corresponding options.

• Accessible
  You can adjust the detailed settings for this function as you like and enable or disable Accessibility to help you make a better use of your phone.

System management

• About phone
  Go to “About phone”, You can learn a variety of information related to the phone.
  For legal information, go to “About phone > Legal Information > Regulatory compliance” (for lnida) .

• Customer service
  You can find the phone manual, service centers, E-warranty card and other information here to make better use of your phone.
  Note
  Before using this function, please enable network access on your phone.

• Recent apps
  After going to “Recent apps” and enabling “Blur display”, you can select the recent apps to be displayed blurred in the background, or choose to enable or disable the “Blur the display of private content”(This option only shows when “Blur display” is on.).

• Global search
  In “Global search”,and then you can set the search scope .

• Date and time
  You can go to ” Date and time” to configure your phone’s date and time.
  Note
  Please turn on network connection before using the  Auto” function.

• Language & Input
  You can set the system language in “Language & Input”. Tap “Languages” to choose a language. Tap “Region”, select the appropriate.

• Backup & Reset
  Reset your phone here. Please tap the corresponding reset options for details.

Security

Update security settings to keep your phone secure.
Security Status
View app security scan and update status here. Use “Find My Device” to remotely locate your device.

Digital Wellbeing & parental controls
You can check the usage of the device here and adjust the settings of some functions to reduce the interference the device causes to you. You can also set up Parental Control to control and manage the use of the phone by your child.

Battery

You can go to “Settings > Battery” and set a mode according to the current status of your phone to help you save battery life while meeting your usage requirements.

Applications and Permissions

• App manager
  All and services installed on your phone will be listed, you can adjust the detailed settings as you like.

• Permission management
  You can use this function to manage and set app permissions

• System app settings
  You can adjust the system app settings to your liking by going to “System app settings”.

Google

You can adjust some of the functional configurations provided by Google here. Tap O on the home screen to learn about detailed solutions to related problems.
In Standby Mode, you can find entertainment, social media and other apps in the Google folder on the home screen. You may need to log in to your Google account to access some of the apps.

Accounts & Sync

• Add account
  To add an account, tap “Add account” and choose the account. You can choose to add multiple accounts.

• vivo account
  You need to register and log into a vivo account to use some functions on the phone. You can only log into one vivo account at a time.

• Auto-sync
  When “Auto-sync” is activated, applications can synchronize data automatically.
  Note
  Please turn on network connection before using this function. Auto-sync will consume power and incur data usage. It is suggested that you turn off this function after you have finished syncing.

System update

You can use “System update” to easily and quickly upgrade your phone system. First, enable Wi-Fi or data network. Then go to “Settings” and tap “System update”. The phone will automatically detect new software version, which you can simply download and install.
Note
A recovery or system update that is not performed by Vivo may cause security risks. It is recommended that you back up important data to a storage device before upgrading. System update consume a large amount of data, you’re suggested to use Wi-Fi.

App Clone

Enter into ” Settings>Applications and Permissions>App Clone”, and turn on the switch of installed Apps that support such function. When the switch is on, a clone App will be generated on the screen.
Copy the application as “II·xxx” , to distinguish the original application. This function allows you to log in with another account. No need to switch your accounts in one app.

NOTE

1. Uninstalling or closing the original app will also delete the cloned app and its data.
2. Double application may increase data usage, please clean up in time with iManager.
3. In view of the actual use of scenes and third-party application restrictions, this feature only supports applications logging in with account, other applications currently don’t support this function.
4. App clone could only be used on vivo’s original desktop, and may not work well on other types of desktop.

Developer options

“Developer options” is used by Android developers. Enabling set options under “Developer options” may lead to crash or abnormality to your apps or device. Please use it with caution. Before use PC tool to manage the device, please enable “USB debugging”. “USB debugging” switch is under “Developer options” menu. Steps to call up “Developer options” menu:

1. Enter “Settings >System management>About phone”.
2. Click seven times at “Software version”.
3. “Developer options” menu will be appeared in “Settings >System management”.

Privacy

Here is a collection of functional settings for the security of the phone, such as system security and privacy security. You can adjust the settings according to your personal needs.

RAM and storage space

Go to “RAM and storage space ” interface, you can check the memory usage of the storage devices, as well as format the storage devices. All data will be cleared after the phone storage has been formatted. Please make sure that you have backed up important data before formatting.

Phone and Contacts

Calls

Smart contacts search and dial
You can dial a number using the dialpad or go to the contacts list, search for a contact and then call the number. Search methods:

1. Enter corresponding numbers for the first several letters of the name of the contact person.
2. Enter corresponding numbers for all letters of the name of the contact person.
3. Enter the contact’s number.

Redial a number in call history
If you have called a contact person, in the interface of dial plate, click at the contact persons showed in the call history above the dial plate, and you can call back; You can slide down the dialpad to hide it so as to view more call logs.

Note
This action can be performed for other functions. For details, please see Call in “Phone and Contacts > More operations”.

Dial from contacts list
You can tap contact icon in the bottom left-hand corner of the dialpad to display the “Contacts” list and select a contact to call.

During calls
During a call, options will be displayed on the screen so that you can perform different actions.

Pause call
You can tap “On hold” to pause the current call and tap again to resume it. When a call is on hold, the cost of the call is the same as when not on hold.

Speaker
During a call, you can tap “Speaker” to turn on the speakerphone. You can also tap this key to change the answering method to normal answering (Using the handset earpiece) or answering with the speaker.

Adjust call volume
You can press the [Volume button] to adjust the call volume.

Turn off screen
You can press the [Power button] to turn the screen off or on. When the screen is turned off, call quality is not affected. Turning the screen off saves battery power and prevents accidental actions when touching the screen.

Calling in the background

1. You can press the [Home button] to make the call run in the background. You can then perform other actions while on the phone, such as searching for contacts. If you need to go back to the call interface, tap the green status bar at the top of the screen.
2. You can also answer or make other calls when in the middle of a call. Before using this function,please go to “Settings > Applications and Permissions >System app settings >Call settings> Call waiting” and enable the function.

Make or answer another call

1. If there is another incoming call, you will hear short beep sounds, and the caller information and call options will be displayed on the screen. You can choose to “Hold & Accept”. If you answer the call, the previous call will be put on hold.
2. If you want to call another number, tap “Add call” and choose a contact number. When you dial the number, the previous call will be put on hold.
   Note
   You can tap “Swap” to switch between the two calls. When you talk on one line, the other line is put on hold.

Call settings

You can go to “Settings > Applications and Permissions > System app settings > Phone” to configure calls.

SIM card

1. Call waiting: When this function is enabled, the network will notify the phone to send reminder sounds when there is another incoming call. You can decide whether to answer the call. When this function is disabled, the phone will not send reminder sounds when there is another incoming call, and the caller will hear a busy signal (Some networks might notify the caller that you are engaged). If you have enabled the call forwarding function, the call will be forwarded to another phone.
2. Call forwarding: When this function is enabled, incoming calls will be forwarded to another phone. You can choose from four options for call forwarding.
3. Call barring: When this function is enabled, the phone’s incoming and outgoing calls will be restricted. You can set restriction conditions and levels according to your needs. You need to enter the password when enabling this function.
4. Voicemail: When this function is enabled, you can receive voicemail messages when the phone is turned off, when you are out of the service area or when it is inconvenient to answer calls. You will receive message reminders when you have new voicemail messages. You can tap and hold the number 1 on the dialpad to go to voicemail.
5. Fixed Dialing Numbers: When this function is enabled, you can only dial numbers in the “FDN list”. The FDN list is saved on the SIM card. You need to enter PIN2 to configure the setting.
6. Show my caller ID: When enabled, your phone number will be displayed on the phone that receives your call.
   Note
   This function is provided by the carrier for users to save, forward and listen to voicemail messages. You can apply at the carrier’s for a voicemail number and password. For details, please consult your carrier.

Contacts

You can tap “Contacts” on the home screen to display the “Contacts” list. New contact
You can tap + in the top right-hand corner of the list to create a new contact. You will be asked
whether to save the contact to the phone or SIM card .

Edit contact
Tap a contact to enter the “Details” interface, then tap “Edit” in the top right-hand corner.

Groups
You can classify contacts, add them to different “Groups” and send text messages to all the contacts in a group. Go to the “Contacts” interface and tap “Groups”. You can then perform the following actions in the “Groups” list.

1. You can add a contact to a group in the following ways:
2. Tap “Not in groups” and then select the group when enter the “Details” interface.
3. Go to the group, tap+, mark one or multiple contacts in the contacts list, then tap “Add”.
4. Remove contact from group: In a group, tap “Remove member” in the bottom right-hand corner, then mark one or multiple contacts to remove the contacts from the group.
5. Send SMS to group: In a group, tap “Send SMS to group” in the bottom left-hand corner to send a text message to all the contacts in the group.

Note
You can only add contacts stored on the phone to a “Groups”.

Settings
Enter the “Contacts> steeing icon” interface, you can have detailed settings.
Note
You can only use “Merge duplicate contacts” for contacts that are stored in the same location.

More operations

Search for contact using index
If the contacts list is long, you can use the index at the right of the list to search for a contact quickly. The contacts are divided into groups according to the initial letter of their surnames. You can tap a letter in the index to go to the corresponding group.

Call
When in the “Contacts” list interface, you can call a contact in the following ways:

1. Slip one contact person from the right to the left, and click’ phone icon;
2. Tap the contact, go to the “Details” interface, then tap phone icon, corresponding to the contact.

Send text message
When in the “Contacts” list interface, you can send a text message to a contact in the following ways:

1. Slip one contact person from the right to the left, and click massage ;
2. Tap the contact, go to the “Details” interface, then tap massage corresponding to the contact.

Messages

When in the standby mode, go to the “Messages” interface and choose a message to view it.

Compose message
When composing a message, you can perform actions on the message in the following ways:

1. Add recipient:
2. Enter the recipient’s number in the “To11 input field.
3. Search for a contact using intelligent matching. The method for intelligent matching is similar to that for intelligent searching using the dialpad. For details, please see Smart contacts search and dial in “Phone and Contacts”. The matched contact will be displayed at the bottom of the input field. You can tap to add it as a recipient.
4. Tap (±) next to the input field and select one or more contacts from recent contacts, contacts, groups or favorites. Select a contact, tap to delete the contact.
5. Add picture, video or audio: Tap + All pictures, voices and videos supported by the cell phone can be sent in the way of short message.
6. Send as multimedia message: When composing the message, tap 11 + > Theme 11 , then enter content and tap send.

Search messages
In the “Messages” list, you can enter a message to search in search bar.

Forward message

1. When viewing a message, tap and hold the message, then tap” ••• >Forward” in the pop-up box.
2. When viewing a message, tap “Edit11 in the top right-hand corner of the screen, select one or more messages, then tap “Forward.

Save contact from message session
In the interface of “Messages” list, long press one contact person, click “Add to Contacts” in the pop-up box.

Desktop apps

Calculator

Enter “Calculator>Calculate” interface. Tap numbers and functions just like you would with a standard calculator. The standard calculator is displayed by default. You can hold the phone horizontally to display the scientific calculator.
In “Calculator>Exchange rate”, you can convert an amount of money from one currency into another according to the latest foreign exchange rates.

Notes
You can create notes here as you like to jot down your ideas and inspirations.

Share or Save note
In the view notes screen, tap to choose to share/save the note.

Deleting notes
You can delete a note in the following ways:

1. Long press a note, then tap “Delete” in the pop-up window.
2. In the “Notes” screen, tap “Edit”, mark one or more notes, and then tap “Delete”.
3. Tap DELETE ICON Din the view notes interface.

Recorder

The recorder allows you to use the built-in microphone and use the phone as a portable recording device. Enter ” Recorder” interface. You can then perform the following operations on the recorder:
Tap • to start recording. Tap 11 to pause recording, and tap TICK ICON  to stop and save recording.
Play recording
Choose a recording file, then tap PLAY AND PAUSE ICON to play/pause.
Drag the slider on the progress bar to go forwards or backwards.

Deleting recordings

1. Long press a recording file, then tap “Delete” in the pop-up window.
2. Tap click icon select the recording files you want to delete, and then tap “Delete”.

Share recording
Long press a recording file, then tap “Share” in the pop-up window.

Compass

You can check out directions, longitude, latitude, and the horizontal line with the compass. Before using the function, please make sure your phone is in horizontal condition and away from electromagnetic interference, to ensure accuracy.

Themes

Change

Take the example of changing themes to introduce download methods. Select your desired theme under “Themes” interface and click “Download”, then click “Apply” after download to change the current theme. After the theme has been changed, the lock screen wallpaper, desktop wallpaper and Home screen icon style will be changed to that of the new theme by default. You can also configure the settings so that wallpapers do not change with the theme. Methods: Under the interface of
“Local”, click s etting icon , switch of “Change home screen wallpaper based on theme” or “Change lock screen wallpaper based on theme”.

Note
Please turn on network connection before downloading online.

i Manager

From the iManager home page, tap setting icon to go to the  Settings where you can adjust the detailed setting of imanage and view more relevant information.

You can tap any function as you need on the home screen of iManager to enter the Execute or Settings interface, providing you with a safe, green mobile life.

Clock

The clock consists of four functions:

1. Alarm: You can tap+ to add several alarm clocks. In the interface of alarm clock, click at setting icon ,You can finish detailed settings according to your habits.
2. World Clock: You can tap + to add times for different cities.
3. Stopwatch: Click e> to start timing, and click to time respectively.
4. Timer: You can use the timer as a countdown clock.

Calendar

You can add your agendas here and set reminders to help you plan everything in your daily life and work.

Events
Select a day and click the+ to create new activities. Once the time is up, the cell phone will remind
you. To delete an activity, tap “Event”, and then long press the content you want to delete.

Settings
Enter the “Calendar> setting” interface, you can have detailed settings.

Music

You do not need to add song manually. The mobile phone will scan for songs on the storage device automatically when turned on and add them to “Music”.

Lists
After tapping “Music > Lists” on the home screen, you can tap “Create playlist” to customize a song list containing your favorite songs.

1. You can add song to custom playlists in the following ways:
   Go to the “Songs” list, tap and hold a song and tap “Add to playlist” in the pop-up window.

2. Edit song list: Go into a custom song list, press “Manage songs”, mark one or more songs, then tap “Add to the playlist/Remove”.

3. Delete song list: Tap and hold a custom song list, then tap “Delete” in the pop-up window. Deleting a custom song list will not delete any songs.

Settings
Enter the =- interface, you can have detailed settings.

Weather

Add city
Tap  to go to “City management”, and then tap+ in the upper right corner to add more cities.

Auto-location
The current city will be located when “Auto-location” is on at “City management” window.

View weather condition
When several cities are added, you can view weather conditions of those cities by sliding the screen to the right or left.

Change the order of cities
Click to enter “City management”, hold down ei!, and drag the city up and down, you can adjust the order of cities.

Deleted city
At “City management”, long press the city, and click “Delete” at the pop-up box.
Note
Please turn on network connection before using II Auto-location 11•

EasyShare

EasyShare neither consumes data nor requires a Wi-Fi connection. You can send/receive files via this function.

An introduction to some features
Phone Clone : You can use “Phone Clone ” to quickly import data from your old phone to this phone without data consumption.
Web Share: This function supports data transfer between the phone and a computer. You can go to the “Web Share” page and follow the instructions shown . VIVO.com
You can learn more about vivo and our products in “Home/Shop”. You can also provide your feedback on the “Support” page and find solutions to common problems.
Note
Before using this function, please enable network access on your phone.

Video
You do not need to add videos manually. When you boot the phone, it will automatically scan the videos saved in storage devices and add them to “Videos”. Tap “Video” on Home to access the
“Videos” list interface, and tap a video to play it. During the video play process, you can lightly tap the screen to show or hide control buttons, which allow you to modify the video settings.

Camera

1. Use the camera to take photos and videos so that you can record the wonderful moments in your life anytime.
2. Go to “Camera” interface and you can zoom the camera frame in/out and adjust the focal length in the following ways:
3. Use two fingers to zoom in/out on the screen;
4. The camera can automatically focus on objects and displays a rectangular box to indicate focus area. You can also tap the screen to manually-set the focus position andlock the focused area onto the objects you want to highlight.

Albums

You can view the photos and videos you have captured and the various images stored on your storage devices.

Note
Picture location information is only available for pictures which include geographical location information.

Share and delete

1. In the photo screen, tap to click icon or press and hold a photo/video to enter the editing mode; select multiple photos or videos, and tap “Share” or “Delete”;
2. In the O Albums” screen, go to a folder, tap click icon or press and hold a photo/video to enter the editing mode; select multiple photos or videos, and tap “Share” or “Delete”.

Edit image
In the “Photo” or “Albums” screen, open an image to view, tap the view image screen to show/hide buttons and edit the image.

Email

Add account
You need to log in to an email account before using email. Enter your email address and password, and tap “Sign in” to access your inbox.
You can add multiple email accounts in the following ways: In the “Local” screen, tap “Add an email account

Settings
In the “Local” screen, tap a logged in account to adjust the detailed settings of this account.

Delete email
You can delete an email in the following ways:

1. ln the inbox list screen, press and hold the email you want to delete and tap “Delete”;
2. ln the read email content screen, tap -delete icon ;
3. The deleted email will be moved to “Trash”. If you wish to delete the email permanently, please delete it again in “Trash”.

Browser

You will enjoy a fast and convenient Internet browsing experience by using this browser that features a newly optimized core, rich site_!!avigation, PC- style interactive design.
Click “Browser” at the desktop and click= to bring up the options box.

vivoCloud

You can use the “vivoCloud” to backup data on your phone to the vivo network server or restore data on the network server to your phone. You need to register or log into a vivo account before using the “vivoCloud”.

Registering a vivo account
Go to “Settings > Accounts & Sync” to register and manage a vivo account.

Logging into a vivo account
If you have already registered a vivo account, go to the “vivoCloud” interface, tap “Login”. Enter your Account and Password, then tap “Sign in”.

Note
You can only log into one vivo account at a time.

Backup and restore
After you successfully log in to your account, you can backup or restore the Contacts, SMS, Web bookmarks, Notes and Blacklist.

Note
Please stay connected to the internet during backup and restore.

Google apps

Google provides entertainment, social networking and other apps. Some apps may require you to sign in to your Google account in order to use them
For further information, visit the Help page of the app.

Introducing some features

• Chrome/Google: Google Chrome is a popular browser to search and visit webpages.
• Gmail: Gmail is an email client that uses Google Mail services to send and receive emails.
• Maps: Google Maps helps find your location while also showing you what\’s around. You can also fill in your commute information so it can show you traffic information for your reference.
• YouTube: YouTube has a variety of videos for you to enjoy. You can even upload your own.
• Duo: Google Duo helps keep you in touch with friends and family through videos calls.
• Files: Files is a file manager to help you manage, share and clean up your saved files and apps.
  Note
  Apps may be unavailable or vary in functions depending on your region and service provider.

Device Maintenance

About maintenance

It is important to understand mobile phone maintenance and servicing thoroughly so that you s can use your phone safely and effectively and extend its service life as much as posible.

Phone and accessories

This phone uses the Android operating system. To view the phone’s version, go to “Settings system management about phone.

Supported file formats

Sound recordings

|

m4a

Music

| mp3,  ogg, ape,  wma, awb, mp2| wa,v m4a,| mid,i                fla,c aac, amr,

Video

|

Instructions for connecting to USB

Connect to your computer using a USB cable, slide down to show the notification bar, select “Files”
and then you can manage the files on your phone using the computer.
Windows

1. With Windows 7 and above, users do not need to install any drivers. You can double click”Computer” (Win 7) or “This Computer” (Win 10) on the desktop to view your device, and then double-click it to copy and manage the files on your phone.
2. With Windows XP, users need to install the MTP driver. Go to www.vivo.com on your computer, select the “Service” tab, and type “USB” in the search box to find the link for the MTP driver. Download and install the driver to manage the files on your phone using your computer.
   Note
   To use the function properly, computers running Windows XP need to install Windows Media Player 11 or above.

Mac

1. Mac OS users need to download “AndroidFileTransfer.dmg” to manage the phone files.
2. Visit vivo official website www.vivo.com, select “Service” page, and click on “USB” download the Mac system MTP management tool. After the download is completed, you can open it to use the computer to manage the phone files.

Linux

Manage the phone files using mtpfs software:

1. Install tool “sudo apt-get install mtp-tools mtpfs”;
2. Create new directory “sudo mkdir /media/mtp”;
3. Modify the directory permission “sudo chmod 755 /media/mtp”;
4. Install device “sudo mtpfs -o allow_other /media/mtp”, then you can manage the phone files in the file manager;
5. Unload device “sudo umount /media/mtp”.

During installation, do not disconnect the USB data cable between the phone and the computer. If it cannot be used after being installed, please restart the computer or reinstall.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>