Y20GTA Smart Watch Manual: User Guide for Y20 Smart Bracelet
- June 6, 2024
- Smart Watches
Table of Contents
The Y20 Smart Bracelet User Manual is a comprehensive guide that provides users with all the necessary information to use the product effectively. The manual explains the device maintenance, how to power on the smart bracelet, and how to download and bind the smart bracelet app. It also provides an introduction to the smart bracelet functions, including how to switch menu interfaces and how to remove the device from your mobile phone. Additionally, the manual includes a section on frequently asked questions (FAQs) that addresses common issues users may encounter while using the smart bracelet, such as why the smart bracelet automatically disconnects Bluetooth when the Android screen goes out or why the smart bracelet cannot receive message push. The manual also includes a warning that users should consult their doctor before using the smart bracelet for any medical purpose, although it can dynamically monitor heart rate in real-time. Overall, the Y20 Smart Bracelet User Manual is an essential resource for anyone who wants to use this high- performance wrist-band smart bracelet to create a thoughtful and healthy experience.
SMART WATCHES Y20 Smart Bracelet
Welcome to use our high-performance wrist-band smart bracelet which creates thoughtful and health experience for you.
Device maintenance
Please remember the following tips when you maintain your smart bracelet:
- Clean the smart bracelet regularly, especially its inner side, and keep it dry.
- Adjust the smart bracelet tightness to ensure air circulation.
- Excessive skincare product should not be used for the wrist wearing the smart bracelet.
- Please cease wearing the smart bracelet in case of skin allergy or any discomfort.
Schematic diagram of main body of the smart bracelet
Power-on
Long press the side button for 3 seconds or plug in the Magnetic charging
cable to charge the smart bracelet.
Downloading and binding of smart bracelet APP
-
Download and install APP
Scan QR code with mobile phone to download APP. For 10S system, select APP, store search Da Fit. Android system, select Google Play to download and install Da Fit.Or scan QR code to download
Note: your mobile phone must support Android 5.1 or 10S 8.0 or above, and Bluetooth 4.0 or above. -
Bind smart bracelet with APP
-
Click on “Add Device” to bind the smart bracelet.
-
Click on your device in the device list scanned.
-
The 105 system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing” to confirm. Connect it directly to Android system.
-
Successfully bound.
Introduction of smart bracelet functions
Power-on status
switch the menu interfaces of main screen, as the interfaces shown in the
following;
Remove Device
For the Android mobile phone, the device can be disconnected from your mobile
phone by simply clicking on Remove device.
For Apple mobile phone after binding removal, you need to click on the symbol
on the right in Setting- Bluetooth, and choose to ignore the device. As shown
below:
SPECIFICATION
| Product Specifications | Description |
|---|---|
| Brand | Y20GTA |
| Product Type | Smart Bracelet |
| Compatibility | Android 5.1 or 10S 8.0 or above, and Bluetooth 4.0 or above |
| Functions | Dynamically monitor heart rate in real-time, switch menu |
interfaces, remove device from mobile phone, receive message push
Device Maintenance| Clean regularly, adjust tightness for air circulation,
avoid excessive skincare products, discontinue use in case of skin allergy or
discomfort
Power-On| Long press side button for 3 seconds or plug in magnetic charging
cable to charge
Downloading and Binding of Smart Bracelet App| Download and install Da Fit
app, scan QR code with mobile phone, click “Add Device” to bind smart
bracelet, confirm Bluetooth pairing request
FAQs| Addresses common issues such as automatic Bluetooth disconnection and
message push failure
Warning| Consult doctor before using for any medical purpose, although it can
dynamically monitor heart rate in real-time
Frequently Asked Questions (FAQs)
Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
- Lock background APP. When the Da Fit process is cleared, the smart bracelet will be disconnected from the mobile phone.
- Set APP self-startup
- Unrestricted background operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set manually without any restriction.
Why cannot the smart bracelet receive a message push?
- Please confirm that you have turned on the switch for message push at the mobile phone client.
- Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ, call, SMS and mobile phone client).
- Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open Da Fit.
Why can’t take a hot bath with the smart bracelet?
Answer: the bath water has a relatively high temperature, and generates a lot
of vapor which is in the gas phase with small molecular radius and can easily
infiltrate into the smart bracelet from the shell gap. When the temperature
drops down, the vapor will condensate into liquid-phase droplets which will
easily cause the short circuit inside the smart bracelet and damage the
circuit board and then damage the smart bracelet.
Warning: Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate at real time.
How do I power on the Y20 Smart Bracelet?
Long press the side button for 3 seconds or plug in the Magnetic charging cable to charge the smart bracelet.
How do I download and bind the smart bracelet app?
Download and install the Da Fit app by scanning the QR code with your mobile phone. Then, click on “Add Device” to bind the smart bracelet.
How do I switch menu interfaces on the Y20 Smart Bracelet?
You can switch the menu interfaces of the main screen while in power-on status.
How do I remove the Y20 Smart Bracelet from my mobile phone?
For Android mobile phones, simply click on Remove device. For Apple mobile phones, click on the symbol on the right in Setting-Bluetooth, and choose to ignore the device.
Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
This may be due to lock background APP, APP self-startup, or unrestricted background operation. Make sure to check these settings.
Why can’t the smart bracelet receive message push?
Make sure that you have turned on the switch for message push at the mobile phone client and that messages can be displayed normally in the mobile phone notification bar. Also, turn on the notification switch of WeChat, QQ, call, SMS, and mobile phone client.
Why can’t I take a hot bath with the smart bracelet?
The high temperature and vapor generated during a hot bath can infiltrate into the smart bracelet from the shell gap and cause damage to the circuit board.
Can I use the Y20 Smart Bracelet for medical purposes?
No, you should consult your doctor before using the smart bracelet for any medical purpose. Although it can dynamically monitor heart rate in real-time, it is not intended for medical use.
Why can’t the smart bracelet receive message push?****
Make sure that you have turned on the switch for message push at the mobile phone client and that messages can be displayed normally in the mobile phone notification bar. Also, turn on the notification switch of WeChat, QQ, call, SMS, and mobile phone client.
Why can’t I take a hot bath with the smart bracelet?****
The high temperature and vapor generated during a hot bath can infiltrate into the smart bracelet from the shell gap and cause damage to the circuit board.
Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?****
This may be due to lock background APP, APP self-startup, or unrestricted background operation. Make sure to check these settings.
Y20GTA Smart Watch Manual_ User Guide for Y20 Smart Bracelet.pptx
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>