CREATIVE MF1705 T60 Hi-Fi 2.0 Desktop Speakers with Clear Dialog and Surround User Guide

: June 6, 2024
: Creative

Table of Contents

OVERVIEW
MASTER RESET
TECHNICAL SPECIFICATIONS
PRODUCT REGISTRATION
OTHER INFORMATION
**SAFETY & REGULATORY INFORMATION
Notice for the USA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MF1705 T60 Hi-Fi 2.0 Desktop Speakers with Clear Dialog and Surround
User Guide

OVERVIEW

2. INTERCHANGEABLE AC PLUGS / SWITCHING POWER ADAPTERS
Creative T60 features a power adapter with interchangeable AC plugs, suitable for use in multiple regions.
Refer to the instructions below for more information.
Replacing Interchangeable AC Plugs

i) Place the AC plug on the power adapter, then push it down until you hear a click| ii) Pull the power adapter’s clip down to release the AC plug from
its attachment| iii) To replace or reattach the AC plug, refer to the initial steps given
---|---|---

Note: The available interchangeable AC plugs are suitable for use in Singapore, Europe, UK, USA, Canada, Japan, Taiwan, China, Korea, Australia, and other regions using the same AC plugs. Available Interchangeable AC Plugs For Singapore and Malaysia, only bundled EU AC Plug is suitable for use.
*Interchangeable AC Plugs are bundled according to regions
ONNECTIVITY AND SOURCE SELECTION

Note: Creative T60 does not feature a built-in microphone. A headset or an external microphone is required for chat features when connected to a supported platform.

MASTER RESET

Master Reset is reserved for scenarios where users encounter problems such as Bluetooth pairing problems or other connectivity issues. Follow the steps below to reset your Creative T60:

Press and hold both Clear Dialog and Surround buttons for 5s
Creative T60 will return to USB mode once Master Reset is complete

TECHNICAL SPECIFICATIONS

Power Output: 2 x 15W RMS
Total System Power: Up to 30W RMS
Peak Power: 60W
SNR: ≥ 75 dB
System Configuration: 2.0 System
Frequency Range: 50–20,000 Hz
Bluetooth Version: Bluetooth 5.0
Bluetooth Operating Frequency: 2402–2480 MHz
Supported Bluetooth Profiles: A2DP (Wireless Stereo Bluetooth), HFP (Hands-Free Profile)
Supported Codec: SBC
Operating Range for Bluetooth Devices: Up to 10 meters (Measured in open space. Walls and structures may affect a range of the device)
Operating Temperature Range: 0–40ºC
Power Adapter:
Input: 100–240V 50 / 60 Hz 0.8A
Output: 18V 2A
Power Adapter Model: NBS 30D180200D5
Note: Compliance markings are located at the bottom of this product.

PRODUCT REGISTRATION

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at www.creative.com/register. Please note that your warranty rights are not dependent on registration.

OTHER INFORMATION

Please visit creative.com/compliance/T60 for the user guide, safety and regulatory information, ErP information where applicable.
Visit support.creative.com to resolve and troubleshoot technical queries at Creative’s 24-hour self-help
Knowledge Base.
You can also find Customer Support Services and other helpful information here.
Warranty information is supplied with your product in a separate document.
Please keep your Proof of Purchase for the duration of the Warranty Period.
Warranty
Keep this document for future reference.
For details on the Creative Warranty period of your product, please visit https://www.creative.com/warranty
Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Speaker, model no. MF1705 is in compliance with Directive 2014/53/EU and S.I. 2017 No. 1206 Radio Equipment Regulations. The full text of the EU and UK declaration of conformity is available at http://www.creative.com/EUDoC.
© 2021 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, Blaster logo and Sound Blaster are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries. The Bluetooth® word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd is under license. All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice. The actual product may differ slightly from the images shown. Use of this product is subject to a limited warranty.

**SAFETY & REGULATORY INFORMATION

**

Creative T60
(Model No: MF1705)
Safety & Regulatory Information
Read this instruction carefully and completely before using the product. Refer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product.

Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
Do not expose your product to water and moisture. If your product is moisture-resistant, take care and not to immerse in water or expose to rain.
Clean the product only with a soft, dry cloth.
Do not dismantle or attempt to repair your product.
Do not pierce, crush or set fire to your product
Keep your product away from strong magnetic objects
Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents. Swallowing and choking hazard.

Warning on Choking Hazard
This product and its accessories may contain small parts which must be kept away from children.
WARNING
CHOKING HAZARD-Small Parts
Not for children under 3yrs.
The following sections contain notices for various countries.
CAUTION:
This product is intended for use with FCC/CE-certified computer equipment. Please check the equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is suitable prior to the installation or use of the product.

Notice for the USA

Federal Communication Commission (FCC) Interference Statement FCC Part 15:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded. Operation with non-certified computers or non-shielded cables may result in interference to radio or television reception.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.
Notice for Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20cm must be maintained between the antenna of this device and all persons.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
SUPPLIER’S DECLARATION OF CONFORMITY According to CFR Title 47 §2.1077

Importer’s Name:
Importer’s Address:| Creative Labs, Inc.
1901 McCarthy Boulevard
Milpitas, CA. 95035
Tel: (408)428-6600
---|---

declares under its sole responsibility that the product

Trade Name:
Model Numbers:
Product Name:| Creative
MF1705
Creative T60
---|---

has been tested according to the FCC / CISPR22 requirement for Class B devices and found compliant with the following standards:
EMI/EMC: ANSI C63.4 & C63.10, FCC Part 15 Subpart B & C Complies with Canadian ICES-003 Class B & RSS-247 standards

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesirable operation.

Supplementary Information:| Thinh Bui
Compliance Manager
Creative Labs, Inc.
15th Mar 2021
---|---

Creative T60 (MF1705) Additional Safety and Regulatory information
European Compliance
This product complies with all applicable directives. A copy of the EU DoC is available at the Creative website.
CAUTION: To comply with the Europe CE requirement, this device must be installed with CE-certified computer equipment which meets Class B limits.
All cables used to connect this device must be shielded, grounded, and no longer than 3m in length.
Operation with non-certified computers or incorrect cables may result in interference to other devices or undesired effects to the product.
MODIFICATION: Any changes or modifications not expressly approved by Creative Technology Limited or one of its affiliated companies could void the user’s warranty and guarantee rights.
The insulating coating on the device also serves the purpose of ESD protection.
This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist The Republic of Vietnam (“Circular”), it does not contain the following substances in a concentration greater than the Maximum Limit value as specified in the Circular.

Substance	Maximum Limit (ppm) 1, 2

lead
mercury
cadmium
hexavalent chromium
polybrominated biphenyls (PBB)
polybrominated diphenyl ethers (PBDE)| 1000
1000
100
1000
1000
1000

Maximum Limit does not apply to applications exempted from the Circular.
Maximum Limit refers to concentration by weight in homogeneous materials.
Notice for Australia
Notice for Malaysia
Creative T60 (MF1705) Additional Safety and Regulatory information