Tzumi Wireless Charging Alarm Clock User Manual

Tzumi Wireless Charging Alarm Clock

User Guide

The wireless charging alarm clock can charge your phone and wake you up right on time as well. It features a modernly designed LED along with a wireless charging base that charges and powers your smartphones, AirPods and other compatible devices through the night. The display brightness can be adjusted for maximum comfort via the friendly and easy to use buttons.

Package Contents

• 1x Alarm Clock
• 1x USB Cable
• Manual

Product Overview and Function

• Easy to use settings
• LED digital display
• Wirelessly charges smartphones and other compatible devices.

Getting Started

1. Powering the Unit
   Plug in the Micro USB cable into the charging port and the other end into a USB power source.

2. Setting the Clock
   Press and hold the time button for 2 seconds until the time flashes to enter the time setting mode

   • Press the time button again then press the button “+” and “-” to switch the time from 12-hour mode to the 24-hour mode.
   • Press the time button again to enter the hour setting mode
   • Then press the “+” pr “-” button to adjust the hours.
   • Press the time button again to enter the minutes setting mode
   • Press the “+” or “-” buttons to adjust the minutes
   • Press the time button again to confirm the time

3. Adjusting the Display Brightness
   Three brightness levels, long press – for 3 seconds to set the next brightness level. Maximum brightness is set as default at first use.

4. Setting the Alarm

   • Press and hold the alarm button for 2 seconds until the alarm flashes to enter the alarm setting mode

   • Press the alarm button again then press the “+” or “-” button to adjust the hours.

   • Press the alarm button again to enter the minutes setting mode

   • Press the “+” or “-” buttons to adjust the minutes
     Press the alarm button again to confirm the alarm time

   • Press the alarm button twice to turn the alarm ON and OFF

NOTE: When the alarm rings, press the alarm button to turn the alarm OFF or press any other button to snooze the alarm for 5 minutes.

Wireless Charging

• The charging pad supports Qi compatible phones, AirPods and other devices
• When charging a device, the charging indicator light will light up.
• If there is a foreign object on the wireless charging pad the status light will blink repeatedly.

Specifications

Safeguards

Please note improper use of this unit can result in potential electric Shock or fire hazards. Please read and follow the safety instructions carefully before installation and use.

This unit should not be used near water for example near a bathtub, kitchen sink, laundry tub or wet basement. It poses a serious risk of electric shock.

The unit should be kept away from heat sources such as radiators, heat registers or other appliances that emit heat. The unit should only be connected to a power supply described in the operating instructions. The unit should be serviced by qualified service personnel if it is damaged or does not operate normally. Do not attempt to fix it on your own.

To reduce the risk of electric shock do not expose this product to rain or moisture.

If you have any other questions or issues with product use and/or care, please contact tzumi Technical Support at: support@tzumi.com or 1-855-G0-TZUMI.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>