Tzumi One Grip Phone Mount User Manual

: June 6, 2024
: Tzumi

Table of Contents

Tzumi One Grip Phone Mount
PRODUCT OVERVIEW & FUNCTIONS
PACKAGE CONTENTS:
SECURING YOUR PHONE IN THE BRACKET HOLSTER
USING THE ADJUSTABLE EXTENDING ARM
INSTALLING THE VENT
USING THE CD-DVD
SPECIFICATIONS
SAFETY PRECAUTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Tzumi One Grip Phone Mount

PRODUCT OVERVIEW & FUNCTIONS

PACKAGE CONTENTS:

1 x Sanction Cup Mount
1 x CD-DVD Slot Mount
1 x Vent Clip Mount
1 x Adjustable Smartphone Bracket Holder

SECURING YOUR PHONE IN THE BRACKET HOLSTER

Step 1: Carefully place your smartphone onto the bracket holster’s flat rubberized surface.

Step 2: While your device rests in the padded bracket arms, squeeze your fingers tightly around the bracket arms and they will tighten on your phone to secure it. Repeat with the bottom bracket to adjust and secure both horizontally and vertically.

Step 3: To release your phone and re-adjust your OneGrip, simply press the Release Button and tighten again as desired.

Step 4: Choose a mount. Insert the fastener into the plastic ball joint on your chosen mount, then secure the mount into the back of the smartphone bracket holder to dock your phone. Adjust the viewing angle to your preferred position for optimal visibility and tighten the fastener.

USING THE ADJUSTABLE EXTENDING ARM

Step 1: Choose an ideal viewing angle from which to apply your suction cup mount. Affix to a clean surface such as your dashboard, windshield or any flat surface. Lock at Position 1 for smooth surfaces. Lock at Position 2 for textured surfaces. Pull the locking tab to create a tight seal.

Step 2: Adjust the telescopic extending arm as necessary. When fully extended, the arm will provide an additional approximate 2” of visibility.

Step 3: Attempt to clean the suction cup with a damp cloth if it does not appear secure or will not adhere to a flat surface properly. Repeat Steps 1-2.

INSTALLING THE VENT

Step 1: Attach the smartphone bracket holder to the vent mount by securing it to the ball joint.

Step 2: Pull the clip spring back and slide the hook into the vent*. Release to secure its position.

*Note: Not compatible with some circular vent styles.

USING THE CD-DVD

Step 1: Attach the smartphone bracket holder to the CD-DVD Slot Mount by securing it to the ball joint.

Step 2: Insert the CD-DVD Slot mount into your vehicle’s CD player slot. All tabs should be flat and aligned.

Step 3: Turn the screw clockwise until the unit does not move. This raises the center tab and locks the mount into place.

*Note: Not compatible with all CD-DVD slots.

SPECIFICATIONS

Designed to hold phones 3.5” to 6.3”

SAFETY PRECAUTIONS

Do not attempt to pierce, strike, or apply strong pressure with sharp or heavy objects. Strong impact or shocks could cause irreversible damage to the unit.
Do not attempt to disassemble or modify the OneGrip in any way.
Discontinue use if the OneGrip appears to malfunction in any way.
For questions or concerns, please contact the tzumi Customer Support Team at tzumi.com/support.

All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Other trademarks and trade names on this package are those of their respective owners.