TESY CH 3120 60 LX Wall Range Hood Instructions

CH 3120 60 LX Wall Range Hood

RANGE HOOD

Instruction for use and maintenance

PRECAUTIONS AND SAFETY MEASURES

WARNING!

• Please read this manual before operating the appliance and keep it at a safe place for future reference. In case the appliance is obtained by a new owner, it should be transferred together with its manual

• CAUTION: Children under 3 years of age should be kept away from the appliance unless they are under constant supervision Children from 3 to 8 years of age are allowed to operate the on/off button ONLY, provided that the appliance is installed and ready for operation and such children have been supervised and instructed in safe operation of the appliance and they understand all related risks Children from 3 to 8 years of age MUST NOT: connect the plug to power sockets, make adjustments, clean it or carry out user maintenance operations. This appliance can be used by children older than 8 years of age and by people with reduced physical, sensor and mental capabilities, as well as by people with insufficient experience and knowledge provided they are supervised or instructed in safe operation of the appliance and understand the related risks. Children should not be allowed to play with the appliance. Cleaning and user maintenance operations must not be carried out by children without supervision.

• CAUTION: Accessible parts may become hot when used with cooking appliances.

• There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels. (Not applicable to appliances that only discharge the air back into the room.)

• Do not use the appliance simultaneously with appliances which generate poisonous gases that are released through a flue, like for example stoves running on gas, coal, fuel oil or wood, unless adequate ventilation has been provided, Such type of heating appliances use air for burning at the place of their installation and release the exhaust gases through the flue. The air gets sucked out from the kitchen or the adjacent room when the range hood operates. This generates vacuum unless fresh air flow is provided. In this case the exhaust gases are sucked in back from the flue and back into the room. Therefore, proper ventilation of the room must be provided.

• Clean the appliance regularly. It is compulsory first
  to turn off the appliance through its power switch
  and to disconnect it from the power socket.

• There is a risk of fire if the cleaning is not done in
  accordance with the instructions

• You shall not light any food on fire (flambé) under the
  range hood.

• The air must not be discharged into a flue that is
  used for exhausting fumes from appliances burning
  gas or other type of fuel. (Not applicable to
  appliances which only discharge air back into the
  room).

• When installing the range hood you must observe
  minimum 65 cm distance between its lowest part
  and the surface of the hob on which cookware will be placed

• When the range hood is installed over domestic
  appliance which uses gas, then the distance shall be
  at least 65 cm. If the instruction manual of the gas
  hot plate itself indicates bigger distance, then it
  should be taken into account.

• WARNING: Failure to install the screws or fixing
  device in accordance with these instructions may
  result in electrical hazards.

• Before connecting and switching on the appliance,
  please check whether the voltage indicated on the
  rating plate corresponds to the voltage supplied to
  your home. This appliance operates with the
  following voltage: 220-240V~ 50Hz.

• This appliance shall be used only for the purpose it
  has been designed for. The appliance is not
  designed for commercial applications. Any other use
  shall be deemed incorrect and therefore dangerous.
  The manufacturer does not bear liability for damages
  resulting from incorrect and irrational use. Not-
  adherence to these instructions will render the
  appliance’s warranty void!

• Do not leave your home while the appliance is
  operating. Please ensure it has been switched off.

• If the supply cord is damaged, it must be replaced by
  the manufacturer, its service agent or similarly
  qualified persons in order to avoid a hazard.

• The power supply cord of your appliance is equipped
  with grounded plug. This cord shall be connected to
  a grounded power socket.

• Do not bend or crush the power cord during
  installation! Otherwise the cord may get damaged

• Do not break or bend the cord, do not pull it along
  sharp edges and do not place it on hot surfaces or
  open flame!

• Place the power cord in such a way that it does not
  hamper the movement of people and it will not be
  stepped on! Use only approved extension cords
  which are suitable for the appliance, i.e. they should
  bear conformity sign!

• Never move the appliance by pulling its cord and
  never use its cord for transporting objects!

• Only qualified electrician shall make the electrical
  connections.

• Any installation done by unauthorized personnel
  may result in lower performance, damage to the
  appliance or accidents.

• Do not plug the appliance in the socket before the
  electrical connections have been completed.

• The socket shall be accessible at all times so that the
  plug can be taken out of it immediately if necessary!
  Never pull the power cord or the appliance itself
  while unplugging it from the mains

• Should you decide to stop using an appliance of
  this kind, itis recommended to render it unusable
  by cutting off its cord after you have disconnected
  it from the mains. Its also recommended to secure
  all appliance-related risks, especially with regards to
  children who may use the appliance to play with it.
  Do not touch the lamps if they have been on for a
  long time= they may burn your hands because they
  are hot.

• Follow the relevant rules and guidelines for ducting
  out the exhaust air.

• Never touch the appliance with wet or damp hands
  this is dangerous for your life!

• Switch on the range hood only after You have
  placed a frying pan, cooking pot or another
  cookware on the hot plate. Otherwise the heat may
  cause deformities to some parts of the range hood,
  Do not leave cookware with hot oil on the hot plate.
  Cookware containing hot oil may cause Seff ignition.

• Be careful with curtains and table cloths while
  cooking, e.g. frying, because the oil may set them
  on fire

• Ensure that filters are replaced in time. Filters that,
  are not replaced/cleaned pose risk of fire due to the
  greasy deposits on them,

• Do not use materials which are not heat resistant
  instead of filters.

• Do not use the range hood without the aluminum
  filters. Do not remove the filters while the appliance
  is operating.

• In case of fire disconnect the power supply of the
  range hood and of the stove. (Unplug the appliance
  from the power socket or switch off the circuit
  breaker)

• If the range hood and another appliance running
  on energy different from electricity operate
  simultaneously, the negative pressure in the room
  shall not exceed 4Pa,

• If in the same place where the range hood is located
  there is also an appliance on liquid or gaseous fuel,
  then this appliance shall be placed in an airtight
  container.

• Installation of the range hood over an appliance
  which runs on solid fuel (wood or coal) is allowed
  only in case the appliance is permanently
  enclosed. if the appliance has not been cleaned in
  accordance with the cleaning instructions it is
  possible to suck in sparkles or other small burning
  particles and thus to cause fire

• When discharging the air out of the room use pipes
  with diameter 120 mm or 150 mm. The pipe
  connection should be as short as possible and to
  have the minimum possible number of curves.

• In case of fire disconnect the power supply of the
  appliances, extinguish the fire; never use water!

• This range hood is only intended to be installed
  over hob with no more than four hob elements.

UNPACKING THE APPLIANCE

• Upon unpacking the appliance please verify that it
  has not been damaged during transportation and it
  has been delivered in full In case of any damage or
  incomplete delivery, please contact your authorized
  seller!

• Do not dispose of the original box! It may be used
  for storage and transportation to avoid any possible
  damages resulting from transportation!

• Disposing of the packaging material shall be done
  in the suitable manner!

• Children shall not play with the polyethylene bags!

CONTENTS OF THE PACKING BOX

The contents of the packaging may vary depending on
the specific model:

CH 312060LX

• Range hood CH 312060 Lx
• A set of aluminium filters
• Non-return flap 0150 mm
• Adapter 0150 mm to 120 mm
• External chimney body
• Internal chimney body
• Installation kit
• Instruction manual
• Warranty card
• Energy label
• Product fiche

SL 400LX

• Range hood SL. 4001X
• A set of aluminum filters
• Non-return flap @ 120 mm
• Installation kit
• Instruction manual
• Warranty card
• Energy label
• Product fiche

CHOOSING A LOCATION FOR INSTALLATION OF

THE RANGE HOOD

When installing the range hood you must observe
minimum 65 cm distance between its lowest part and
the surface of the hob on which cookware will be placed.

Figure 1 – Requirement for minimum distance from the
working surface

INSTALLATION INSTRUCTIONS

• During installation always use protective gloves.

• All safety bolts and safety covers shall be installed
  in the way specified in the instructions, otherwise
  the appliance may fall.

• Do not place heavy objects on top of the appliance.

INSTALLATION INSTRUCTIONS OF CH 3120 60 LX

The CH 3120 60 LX chimney-type range hood is designed for wall-mounting. The aluminum pipe will be hidden by two chimney bodies.

Figure 2 —Installation of the mounting hooks and the non-return flap

Before begin mounting the range hood on the wall, ix the two mounting hooks to the appliance each of them by a bolt m5x35 and the non-return flap with screws 3.5×9.5.

Figure 3 Installation diagram

• Mark on the wall and drill with a 10mm drill bit
  openings A, B and C, and opening D and E with a
  G6 drill taking into account the distance between
  the installation openings.
  Insert the plastic wall plugs in the drilled holes.

• Tighten the screws in wall plugs A and B.

• Install by means of screws in wall plugs D and E the
  fixing bar of the chimney bodies.

• Hang the range hood on the mounting hooks.

• Fully tighten the screws.

• Tighten a screw in wall plug C.

• Connect the flexible aluminum pipe to the outlet
  of the range hood and to the flue, taking into
  account that the bends and curves reduce the
  absorption power, so they should be reduced to the
  minimum

• Ensure that the connection will not get loose when,
  the appliance operates at maximum power.

• Install the chimney bodies by fixing them to the
  range hood and the hook

INSTALLATION OF SL 400 LX

• Mark on the bottom of the cabinet and drill 4 holes
  with diameter a2mm, taking into account the
  distance between the installation openings,

• Mark and cut the opening for the outlet metal pipe
  of 0120mm, and consider that the opening should
  be of bigger diameter.

• Install the range hood to the bottom of the cabinet
  with 4 screws M4x30.

• Place the non-return flap at the outlet of the range
  hood.

• Connect the flexible aluminum pipe to the outlet,
  of the range hood and to the flue, taking into
  account that the bends and curves reduce the
  absorption power, so they should be reduced to the
  minimum.

• Ensure that the connection will not get loose when
  the appliance operates at maximum power

Thank You for choosing a TESY electric range hood. This
appliance helps for better atmosphere in the kitchen
while preparing food. correctly operated and taken
care of, as described in these instructions, the device will
give You many years of useful operation

The present instruction manual explains the installation,
operation, maintenance and cleaning of the following
models TESY 5-speed inox household electric range
hoods:

• CH312060LX
• SL400Lx

OPERATION OF THE RANGE HOODS

CH 3120 60 LX and SL 400LX range hoods share
similar operation logics. They are operated by five
buttons located on the front panel of the range hood
for comfortable and easy access. The display shows the
ventilation speed.

SL 400LX controls are activated when You pull the
front panel forwards. Turning off the range hood is done
by pushing the panel back.

Figure 5 — Control buttons of CH 3120 60 LX and
SL 400LX

Description of the control buttons shown in figure 5
– Button for switching on/off the fan

– Button for reducing the ventilation speed

– Button for increasing the ventilation speed

– Timer for delayed switch off

– Button for switching on/off the lightening

The range hood is switched on by the button +. The display
shows a number from 1 to 5 denoting the ventilation speed
Increasing the ventilation speed is done by pressing the
button “+” and for reducing the ventilation speed you
should press the button “=” The in-built lightening of the
range hood is switched on/off by pressing the button **. By
pressing the button © you will activate the timer function
for delayed switch off, and when 15 minutes have expired
the range hood will automatically switch off.

OPERATING THE RANGE HOOD WITH AND
WITHOUT CARBON FILTER

• Do not use the appliance without filters!

• It is compulsory first to turn off the appliance
  through its power switch and to disconnect it from
  the power socket before replacing the carbon filter.

• Never wash the carbon filter. Keep it away from
  children

TESY range hoods are intended for use with standard
aluminum filters and also with filters with carbon which
may be purchased separately.

This filter is not included in the package, but you can
purchase it from Your supplier or service centre. In
this manner of operation the filter shall be replaced
with a new one every 3 to 5 months depending on the
frequency of use.

Figure 7 – Replacing carbon filter of SL 400 LX

To install the carbon filters align them with the center of
the motor housing, push in and twist clockwise to lock.
Removing them is done in reverse order.

LAMP REPLACEMENT

• It is compulsory first to turn off the appliance
  through its power switch and to disconnect it from
  the power socket.

• Wait for the lamp cool down, otherwise You may
  burn yourself.

Replacing the lamp of CH 3120 60 LX

CH 3120 60 LX range hood has two max 50W 220-240 V-
50Hz GU10 halogen lamps. In order to replace a
faulty lamp, please follow the procedure below:

Remove the aluminum filters.

Press the holder backwards in order to lower the
lamp

• Turn the faulty lamp in a counter clockwise
  direction

• Screw the new lamp in a clockwise direction.

• Reinstall the aluminum filters.

Figure 8 ~ Replacing a SOW GU10 halogen lamp of
CH 312060 LX

Replacing the lamp of SL 400 LX

SL.400 LX range hood has two max 3W 220-240 V~
50Hz LED E14. In order to replace a faulty lamp,
please follow the procedure below:

• Remove the aluminum filters.

• Unscrew the faulty lamp in counter clockwise
  direction.

• Screw the new lamp in clockwise direction

• Reinstall the aluminum filters.

CLEANING AND MAINTENANCE

Itis compulsory first to turn off the appliance
through its power switch and to disconnect it from
the power socket.

Wait until the appliance has cooled down before
cleaning it.

• There is risk of damage caused by moisture
  penetrating into the electronic components. Never
  clean the control elements with damp cloth

• The surface may got damaged if any sharp or
  abrasive cleaning objects or detergents are used,
  Never use such. You can obtain suitable cleaning
  and protective detergents from your dealer. The
  surface of the appliance and the control elements
  are sensitive to scratches.

• Clean the surface with a soft damp cloth, detergent
  for dishwashers or soft glass detergent. Do not use
  dry towels, abrasive sponges, substances which
  require rubbing, detergents which contain sand,
  soda, acid or chlorine or other strong chemicals.

• Clean the inox surfaces only in the direction of
  rubbing.

• Do not use detergents and wet towels on the
  control elements.

• Never immerse the appliance into water — there is
  danger for your life from electric shock!

Cleaning the aluminum filters

• Wash the aluminum filter regularly. You may need
  your range hood to operate at higher speed
  because clogged filters restrict the air flow.

The aluminum filters catch the greasy particles

contained in the steam released during cooking. At

normal frequency of operation (1-2 hours a day), the

aluminum filters have to be cleaned once a month.

Do not use too strong detergents which contain acid o,
chlorine.

While cleaning the metal filter, you need to clean also
the holding mechanisms of the metal filter on the
appliance with damp cloth.

You can wash the metal filter in a dishwasher or
manually.

Washing the aluminum filters in a dishwasher

In case of washing the aluminum filters in a dishwasher,
they may be slightly bleach. This will not affect the
performance of the filters. Do not wash the severely
clogged aluminum filters together with dishes.

Place the aluminum filters in the dishwasher freely or
positioned without any pressure on the dishes.

Periods of cleaning the aluminum filter

The filter must be cleaned when a “C” signal appears
on the display or on every 2-3 weeks (according to the
frequency of use). After cleaning and replacing the
filters 4+ button must be pressed for more than 3
seconds (when the appliance is off) to clear the “C”
signal. An “E” signal will appear on the display and the
appliance will start operating in the normal position. If
you want to continue working without removing the “C”
signal, active speed will appear for 1 second when
press the button +-, then the “C” signal will appear
again and the motor will keep working.

Washing the aluminium filters manually

You can use oil solvent for removing persistent stains.
First soften the spots on the aluminium filter with hot
water with dishwashing liquid.

Use a brush to clean it and then rinse the filters with
plenty of water.

Leave the aluminium filters to dry fully before
reinstalling them in the range hood.

Additional notes:

• Incase of damage or unplanned repairs, unplug the
  appliance from the power socket or the fuse and
  call an authorized service technician!

• Repairs shall be always performed by authorized
  service centres or technicians

• Use the various speeds of the range hood in the
  correct manner.

• Operating the range hood at high speed increases
  the consumption of electricity.

AUTHORIZED SERVICE INTERVENTIONS

If the lightening does not work:

• Ensure the appliance is connected to the mains and
  the fuses are not damaged.

• Check the light bulbs. Ensure the appliance is
  disconnected from the mains while you are
  checking. Tighten the lamps if they have got loose.
  If they still do not work after this, replace them..
  le causes and actions you may take without
  9 service technicians.

The appliance does not operate at all:

• Check whether the appliance is connected to the
  power supply.

• Check the fuses of the appliance and the main fuses
  in your home.

If the appliance does not work at full power or it
generates loud noises during operation:

• Is the diameter of the exhaust pipes sufficient?
  (minimum 120 mm)

• Are the metal filters clean? Please check.

• If you use the appliance without ducting the air out
  of the room, please ensure that the active carbon
  filters are not more than 6 months old

• Ensure proper ventilation in the room and fresh air
  flow. If you are still dissatisfied with the performance
  of your range hood, please contact an authorized
  service centre.

FAULTS DIAGNOSTICS

Technical Chart

Environment protection instructions

Obsolete electric appliances contain valuable materials and consequently they should not be treated as domestic waste! We ask for Your cooperation and Your active contribution to protect the resources and the environment.
Please submit Your out-of-use appliances to the organized buy-back stations (if there are such).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>