anslut 423-360 Spot Light Instruction Manual
- June 6, 2024
- anslut
Table of Contents
anslut 423-360 Spot Light Instruction Manual
USER INSTRUCTIONS FOR SPOTLIGHT
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference.
(Translation of the original instructions).
SAFETY INSTRUCTIONS
Read the user instructions carefully before use!
Save these instructions for future reference.
- FOR INDOOR USE ONLY.
- For wall mounting.
- Do not connect the product to the mains while it is still in the pack.
- Do not insert or remove bulbs when the product is connected to the mains supply.
- Do not use in bathrooms, or wash rooms etc.
- Do not use bulbs with more than the permitted output (see type plate) – risk of overheating.
- The product gets hot when in use. Leave the product switched off for at least 10 minutes before adjusting, cleaning or changing the bulb, otherwise there is a risk of burn injuries.
- Handle glass parts with care. Clean with a dry cloth. Never use liquids or abrasive detergents.
- No object may be placed closer than 0.5 metres to the product.
- Never modify the product in any way. Modifications can result in serious personal injury and void the warranty.
ELECTRICAL SAFETY
New installations and extensions to existing systems should always be carried
out by an authorised electrician. If you have the necessary experience and
knowledge, you may replace switches and power points, fit plugs, extension
cords and light sockets. If not, you should contact an electrician. Incorrect
installation can result in electric shock or fire.
TECHNICAL DATA
INSTALLATION
PREPARATIONS
- Check that there are no concealed electric cables or conduits where the installation is to be carried out.
- Remove all the packaging material and check that all the parts are included. Follow these instructions when installing.
- Check that all screw connections and electrical connections are tightened before use. The product can be connected to a dimmer.
- Contact an authorised electrician for advice on a suitable type of dimmer.
TOOLS
- Flat and crosshead screwdrivers.
- Drill and drills.
- Stripping pliers for electric wires.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Loading......