TOOLKISS Frameless LED Light Anti-Fog Wall Bathroom Vanity Mirror Installation Guide

TOOLKISS Frameless LED Light Anti-Fog Wall Bathroom Vanity Mirror

For easy and safe installation, please refer to the following: Read all instructions thoroughly before installing the enclosed product. Read and take note of all safety, care and maintenance information. PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT OPERATION AND MAINTENANCE.

Product Features

• Extra thick LED light
• Touch switch with memory
• Touch switch dim function
• Anti-fog pad

LED Mirror

Series

• LDJSBM2432SKSXXXX
• AB-C-4024R-U-001

Size

• W600XH800MM
• W1000XH600MM
• Series: AB-C-C24-U-001
• Size:  DIA600MM

WARNING AND SAFETY INSTRUCTIONS

Before assembling your LED Lighted Mirror fixture, please make sure that you carefullyread through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.

WARNING: Risk of Fire and Electric Shock

• All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
• Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
• Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
• Regularly check the cord, the transformer and all other parts for damage, if any part is damaged the product should not be used.

INSTALLATION SAFETY

• Inspect the product immediately upon receipt for transit damage or missing parts.
• Handle the product with care and protect against knocks to all sides and edges of the glass.
• Ensure there are no hidden pipes or cables in the wall before drilling.
• Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.

CAUTION: The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.

NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazardous locations.

PRODUCT DESCRIPTION

CHECK THE PRODUCT LIST AFTER OPENING THE PACKAGE

• LED Lighted Mirror: 1pcs
• Installation Manual: 1pcs
• Z bar: 1pcs
• LDJSBM2432SKSXXXX Wall Mounting Screws: 4pcs One as a spare part
• LDJSBM2432SKSXXXX Drywall Anchor: 4pcs One as a spare part
• AB C 4024R U 001 Wall Mounting Screws: 5pcs One as a spare part
• AB C 4024R U 001 Drywall Anchor: 5pcs One as a spare part

（TOOLS YOU MAY NEED)

Series

• LDJSBM2432SKSXXXXA
• B-C 4024R U 001

Size

• W600XH800MM
• W1000XH600MM

• All diagrams are for reference only.
• All model dimensions and proportions positions will vary.

Model: LDJSBM2432SKSXXXX

Model: AB-C-4024R-U-001

INSTALLATION PROCESS

• Step 1: Use an I Beam level to mount the included mounting bracket with 3 screws (Use anchor when it’s installed on drywall, concrete, or tile surface).
• Step 2: Make sure the circuit breaker for the power source of the mirror is off. Then connect the neutral (white), hot (black), and ground (copper wire or Green) wire between the mirror and the junction box.
• Step 3: Hang the mirror with desired placement by mirror Z bar onto the mounting bracket.

Warning

• Always switch off the electrical supply at the mains during installation and maintenance.
• Do not switch on the electrical supply at the mains until the end of the installation.

PRODUCT DESCRIPTION

CHECK THE PRODUCT LIST AFTER OPENING THE PACKAGE

• LED Lighted Mirror: 1pcs
• Installation Manual: 1pcs
• Z bar: 1pcs
• AB C C24 U 001 Wall Mount ing Screws: 4pcs One as a spare part
• AB C C24 U 001 Drywall Anchor: 4pcs One as a spare part

(TOOLS YOU MAY NEED)

• Series: AB-C-C24-U-001
• Size: DIA 600MM

Model: AB-C-C24-U-001

• All diagrams are for reference only.
• All model dimensions and proportions positions will vary.

INSTALLATION PROCESS

• Step 1: Use an I Beam level to mount the included mounting bracket with 3 screws (Use anchor when it’s installed on drywall, concrete, or tile surface).
• Step 2: Make sure the circuit breaker for the power source of the mirror is off. Then connect the neutral (white), hot (black) and ground (copper wire or Green) wire between the mirror and the junction box.
• Step 3: Hang the mirror with desired placement by mirror Z bar onto the mounting bracket.

Warning

• Always switch off the electrical supply at the mains during installation and maintenance.
• Do not switch on the electrical supply at the mains until the end of the installation.

OPERATION PROCESS

Series

• AB-C-4024R-U-001

• AB-C-C24-U-001

• Connect the power supply and touch the switch once to turn on the light.

• When the light is on, the anti-fog function is activated automatically.

• Adjust the brightness of the light by long pressing the same switch.

1. All diagrams are for reference only
2. All model dimensions and proportions positions will vary.

Button 1

• First short press, the anti-fog function works.
• Second short press , anti fog function stops.
• The two operations loop in turn.

Button 2

• Gently press to change the color temperature
• First press causes the neutral light, it is mixed light by 3000K+
• The second press causes the cool white light, it is 6400K ;
• The third press causes the warm yellow light, it is 3000K.
• The three operations loop in turn.

LED Mirror Power Source FAQ

Scenario 1
(Wall Switch)

By doing so, the mirror is now bridged to the wall switch. In order to turn on the mirror, the wall switch needs to be. The touch switch can be used to turn on the LED mirror and anti-fog pad. The mirror shuts down once the wall switch is flippe d to OFF.

Scenario 2
(Wall Dimmer Switch Not Accepted)

• This is a scenario that is not acceptable. There is no workaround for our mirror.

Do not try this way as it will damage the LED driver.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>