AtGames Controler Wireless Gamepad Instruction Manual

AtGames Controler Wireless Gamepad

Sign Up For ArcadeNet® !

• More Games to Play
• Discounts and Special Offers for Members
• Online Multiplayer and Voice Chat
• Global Leaderboards and Leagues Events

PARTS

HOW TO CHARGE MY LEGENDS GAME PAD”‘
Before the first use, please connect the Legends Gamepad ‘” to the provided Power Adapter• (Output: 5V/2A) or a computer with the provided USB cable until it’s fully charged (LED 4 will stay lit). Subsequent full charges should take approximately 2-3 hours.
Note: While some compatible USB devices may be able to supply power to the Legends Gamepad AtGames cannot recommend any particular device. Please follow the instructions on the third party charger.

LEGENDS CORE FEATURES

1. PAIRING BUTTON
2. RESET BUTTON
3. MICRO USB PORT
4. USB PORT
5. HDMI PORT
6. ETHERNET PORT

HOW TO SET UP

1. Connect the Legends Core to a TV or monitor via the included HDMI cable*.
2. Use the included Micro USB Charging Cable and Power Adapter• to power the Legends Core.
3. Switch to pairing mode on your controller (control device).
4. Press the pairing button on Legends Core and the pairing window will display on the screen.
5. Press the pairing button and select your control device. Long press the pairing button to confirm the pairing.

The control device:

• You may use the AtGames Legends Gamer/GamePad'” series or third party controllers to connect with the Legends Core.
• While a variety of control devices may be able to connect, AtGames cannot recommend any particular device.
• Third party controllers may not operate properly due to operational differences. Please follow instructions from the third party device for additional information.
  Note: Micro USB Data Sync Cable (4.9ft): HDMI Cable (1ft): Micro USB Charging Cable (5ft): Power Adapter are included.

QUICK START GUIDE
All screenshots shown are for illustration purposes only. Actual screens may vary.

1. Power on the Legends Core and connect  to your control device .
   

2. Use your controller to select from [GAMES] to enjoy 100 pre-loaded games. (Note: Internet connection is not required. The games can be played offline.)

3. To access the internet, connect an Ethernet Cable (not included) or go to [SETTINGS] to connect through Wi-Fi.
   

4. To connect through Wi-Fi:

   • Select [Wi-Fi] under the [SETTINGS] page.
   • Select the Wi-Fi SSID you would like to connect to, and select [Connect]. If prompted, enter the Wi-Fi password using the on-screen keyboard and select
     [Submit] when done.

HOW TO UPDATE FIRMWARE

1. Power on the Legends Core and connect to your control device.
2. Connect internet via Ethernet (Ethernet cable is not included) or Wi-Fi.
3. Go to [SETTINGS] and select [Version].
4. If there is a newer version, follow the instructions to download the latest firmware. Make sure the internet connection is stable during this process.
5. Once the firmware is downloaded successfully, select [Upgrade] and the device will reboot automatically to activate the new firmware version.
   Note: If you encounter any issues on firmware update, please contact support@atgames.net

HOW TO SIGN IN WITH YOUR ARCADE NET® ACCOUNT

1. Go to [SETTINGS] and select [SIGN IN].

2. Sign up for a new account if you don’t have one yet.

3. Once you have an ArcadeNet® account, you can choose either to sign in with your email or with the QR Code. To sign in with your email, enter the email address and password.
   

4. To sign in with the QR Code, a smartphone or tablet is required.

5. Use a smartphone or tablet to scan the QR Code on the screen to launch the ArcadeNet® website. You will be directed to the login page, where you can choose either to sign in with your existing Google/Facebook account or your email.
   

6. You will see the authorization notification once complete. Now you can close the window and return to your Legends Core. A “Success!” message will show on the screen once signed in.
   

WHEN TO SAFELY POWER OFF LEGENDS CORE
Do not power off the Legends Core during the following:

• Firmware update
• Factory reset
• Data cleanup
• Read/write USB drive

This could prevent irreversible data loss and/or damage to your device or USB drives.

WARRANTY INFO

The manufacturer warrants this product to be free and clear of defects in the materials and workmanship, under normal residential use and conditions, for a period of thirty (30) days from the original invoice date. Shipping and handling fees are to be paid for by the customer. To make a warranty claim, please submit a service request here: support@atgames.net Standard warranty coverage for the AtGames Legends Core Plus does not apply to and is considered invalid due to misuse, improper maintenance, self-repair, tampering, or invasive hardware modifications of any kind, and damages or dysfunction caused by shipping or non-manufacturing related causes.

Note: Standard warranty services are valid with receipt from an authorized retailer. Purchases through third-party sellers and resellers do not fall under the standard warranty program. For warranty support, please contact the third-party seller or reseller where you purchased the product.

FEATURED GAME

• Bad Dudes Vs. DragonNinja
• Battle Shark™
• Bubble Bobble TM
• Burgerl ime
• CadashTM
• City Connection
• Elevator Action TM
• Front Line™
• GrowlT”‘
• Gun & Frontier™
• Joe & Mac: Caveman Ninja
• Joe & Mac Returns
• KiKi KaiKai™
• Liquid Kids™
• Rod-Land
• Secret Agent/Sly Spy
• Space Gun™
• Space Invaders™
• Tetris®
• Tetris® Plus
• Tetris® Plus 2
• The Astyanax
• The Fairyland Story™
• The New Zealand Story™
• The Ninja Kids rM
• Thunder Fox™
• Violence Fight™

And many more …

© CITY CONNECTION CO., LTO
DATA EAST and DATA EAST logo(s) are trademarks in United States and other countries or registered trademarks in European Union and Japan of G-MODE Corporation.
© 2021 Disney. All rights reserved.
© 2021 Lucasfilm Ltd. All rights reserved.

Copyright© Piko Interactive LLC – All Rights Reserved.
SPACE INVADERS ,. , BUBBLE BOBBLE =, OPERATION WOLF ‘”, GROWL'” and other TAITO branded games included in this product are officially licensed by TAITO CORPORAT ION to AtGames Interactive.
TAITO is the exclusive owner of the global intellectual property rights including copyrights and trademarks for all TAITO branded games included in this product.
Tetris ® & © 1985,-,2021 Tetris Holding.
Tetris logos, Tetris theme song and Tetriminos are trademarks of Tetris Holding. The Tetris trade dress is owned by Tetris Holding.
Licensed to The Tetris Company.
Tetris Game Design by Alexey Pajitnov.
All Rights Reserved.

LEGENDS GAMEPAD™ FEATURES

*Press and hold [HOME] to turn on the controller

1. LED 1
2. LED 2
3. LED 3
4. LED 4
5. SELECT
6. LEFT STICK
7. D-PAD
8. HOME”
9. START
10. Y
11. B
12. A
13. X
14. RIGHT STICK

WIRELESS -LEGENDS ARCADE FAMILY DEVICE

1. Press and hold [HOME] and [X] on controller for 2 seconds to enter its pairing mode. [LED 3] will blink quickly.
2. Go to your Legends Arcade Family’s device SETTINGS on the Main Menu and select Wireless Pairing.
3. Highlight [Legends GamePad] and select Connect. [LED 3] will stay lit when connection is successful.
4. Controller will auto reconnect to your Legends Arcade Family device with the press of [HOME] once it has been paired.

WIRELESS CONNECTION -WINDOWS/ANDROID

1. Press and hold [HOME] and [X] on controller for 2 seconds to enter its pairing mode. [LED 3] will blink quickly.
2. Go to your Windows/Android device’s Bluetooth settings and pair with [Legends GamePad]. [LED 3] will stay lit when connection is successful.
3. Controller will auto reconnect to your Windows/Android device with the press of [HOME] once it has been paired.

WIRED CONNECTION

1. Press and hold [RB]. Connect the controller to your device via Micro USB Data Sync Cable.
2. When successfully connected to a Legends Arcade Family device [LED1] will stay lit.
3. When successfully connected to a Windows-based computing device [LED3] will stay lit.

BATTERY

STATUS : LED INDICATOR

• Low battery mode ————————–► LED 4 blinks quickly
• Battery charging ————————–► LED 4 blinks slowly
• Battery fully charged ————————–► LED 4 stay lit

POWER SAVING
The controller will shut down automatically if not used for 5 minutes.

BATTERY CAUTION

• This product contains a non-replaceable battery.
• There is a risk of fire and personal injury if the battery is punctured, damaged or misused.
• Do not dismantle, crush, incinerate or short-circuit the battery.
• Never expose the battery to extreme temperatures or moisture.
• Keep away from flammable materials and direct sunlight.
• Only charge using the provided cable.
• Adult supervision of the battery while it is charging is required.
• Allow the battery to cool down to the room temperature before charging.
• Charge on a non-flammable surface and keep away from flammable products.
• Discontinue charging if the battery becomes hot, swells, smokes, or gives off a strong odor.
• Battery chargers used with the product are to be regularly examined for any damage to the cord, plug, enclosure, and other parts, and in the event of such damage, they must be used until the damage has been repaired.
• Recycle or dispose of the battery according to the federal, state, and local laws.
• Keep these instructions for future reference.

SAFETY NOTICE

• Do not submerge the device in water or expose it to extreme heat or to strong magnetic fields. Doing so may cause permanent damage to your device.
• Always use a dry towel to clean the device.
• Transformers are suitable for indoor use only. Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by children shall be under the full supervision of parents.

FCC WARNING

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
For Legends Core
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

For Legends GamePad'”
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Industry Canada license – exempt RSS standard(s).

Operation is subject to the following two conditions:

• This device may not cause interference, and
• This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

For Legends Core
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

For Legends GamePad'”
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body..
5GHz band (W52): Indoor use only.

ISED STATEMENT

This device complies with Industry Canada license – exempt RSS standard(s).
Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

For Legends Core
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body..

For Legends GamePad'”
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.
5GHz band (W52): Indoor use only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>