H-2818WIN HUEDA Hub WiFi Controller Owner’s Manual
- June 10, 2024
- HUEDA
Table of Contents
- H-2818WIN HUEDA Hub WiFi Controller
- SAFETY & WARNINGS
- FEATURE:
- INCLUDED ITEMS
- PRODUCT PARAMETERS
- WIRING DIAGRAM
- PRODUCT DIMENSION
- HUEDA APP PAIRING GUIDE
- RESET/UNPAIRING GUIDE
- COMPATIBLE HUEDA™ SERIES COLOR RECEIVERS/CONTROLLERS
- FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
- THREE YEAR LIMITED WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ledworldlighting.com
ledworld.ca
1-800-387-4081
HUEDA™ HUB WiFi Controller
Model: H-2818WIN
H-2818WIN HUEDA Hub WiFi Controller
BEFORE YOU BEGIN, READ ALL WARNINGS AND INSTALLATION INSTRUCTIONS (AS THEY MAY
HAVE BEEN UPDATED FROM PREVIOUS VERSIONS ).
IMPROPER INSTALLATION(S) PRESENT HAZARDS, WHICH CAN RESULT IN PERSONAL INJURY
OR PROPERTY DAMAGE.
SAFETY & WARNINGS
- Only power with a power supply that has been included in the box.
- Ensure applicable wire is installed between driver, fixture, and any controls in between. When choosing wire, factor in voltage drop, amperage rating and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires and cause fire.
- This product is rated for indoor use only (dry locations). Avoid the direct sun light.
- Do not modify this product beyond the instructions in this guide or the warranty will be void.
- Wiring diagrams in this installation guide for basic installations. Please carefully review your installation before proceeding.
FEATURE:
HUEDA™ Hub easily connects to your router to allow smart phone device (IOS > 8.0) to control the HUEDA™ family of color receivers and DMX512 color decoders.
INCLUDED ITEMS
- HUEDA™ Hub Wifi Controller
- 12VDC Power Adapter
- LAN Cable (2 meter (6.56ft))
PRODUCT PARAMETERS
Part No. | H-2818WIN |
---|---|
Operation Voltage | 12V DC (0.3A Max.) |
WIRING DIAGRAM
Method 1 : Connect your smart phone with your home net router(WiFi-RF)
Method 2 : Connect your smart phone with HUEDA™ HUB H-2818WIN (WiFi -RF)
Method 3 : Connect your smart phone device to your home router to color control DMX512
Method 4 : Connect with LT-840 DMX decoder
PRODUCT DIMENSION
HUEDA APP PAIRING GUIDE
Step 1 :
Turn on the HUEDA™ Hub Master Controller. Light indicates that HUEDA™ Hub
master controller is turned on.
Step 2 :
On your iOS device go to wifi settings. From the available wifi networks look
for Easy lighting or Hueda. Select the Easy lighting or Hueda as the wifi
network. Enter the password 0123456789. If plugin to ethernet jack at back,
this step is not required.
Step 3 :
Open the HUEDA™ App on your iOS device. Select the Pair button in app Color
Tab. Select the zones you would like to pair, then press the learning key on
your HUEDA radio device (H-R009PD or H-R009FA(W)) followed by the pair button
at the bottom of the app screen. For DMX wired mode, please look DMX decoder
for further instructions.
Step 4 :
The Connected LED light will blink to confirm zone designation and
corresponding color will light
RESET/UNPAIRING GUIDE
Press at learning button on receiver over 5 seconds until LED light flash. This unpairs the receiver.
COMPATIBLE HUEDA™ SERIES COLOR RECEIVERS/CONTROLLERS
5CH DMX Decoder
(LT-995)
| 32CH DMX Decoder
(LT-932-OLED)
| Easy DMX512 Decoder
(H-2102B(W))
---|---|---
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: The manufactures is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications will void the user’s authority to operate the equipment and warranty.
THREE YEAR LIMITED WARRANTY
LED WORLD INC. warranties this product for three year (some exceptions may
apply) from the date of shipping unless otherwise noted in writing. This
warranty is expressly in lieu of all other warranties expressed or implied.
Under this Limited Warranty, the obligation of the company is limited to
replacing on a prorated basis, at its option, any component found to be
defective. This Limited Warranty does not apply to damage caused by buyer or
alteration to the product or incorrect power supply. Factory warrantees are
covered by the original manufacturer and claims must be submitted to them. Use
only with LED World’s regulated class 2 power supply.
LED World Inc. And its providers will never be liable to you or any other
person for any indirect, incidental, consequential, special, punitive or
exemplary loss or damage arising from, connected with, the purchase of
products, including but not limited to loss of data, business, markets, cost
of labour, savings, income, profits, use, production, reputation or goodwill,
anticipated or otherwise, or economic loss, under any theory of liability
(whether in contract, tort, strict liability or any other theory or law or
equity), regardless of any negligence or other fault or wrongdoing (including
without limitation gross negligence and fundamental breach) by led world inc.
Or any person for whom led world Inc. Is responsible, and even if led world
Inc. Has been advised of the possibility of such loss or damage being
incurred.
If a product is defective, we will replace the product with similar or
identical product or at our option a credit towards a future purchase. To make
a claim under this warranty, obtain a return authorization number.
LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 2.2 12/22/22 Copyright © 2022 LED WORLD INCTM. All Rights Reserved. We are not responsible for errors or omissions. Product and specifications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).
References
- LED World Canada - A Commercial LED lighting supplier
- LED World Lighting - A Commercial LED lighting supplier
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>