Silk n ND-FM01 LED Face Mask Installation Guide

: June 6, 2024
: Silk n

Silk n ND-FM01 LED Face Mask Installation Guide

ND-FM01

Package contents

FIG 1 Package contents

Legal notice

Home Skinovations Ltd. reserves the right to make changes to its products or specifications to improve performance, reliability, or manufacturability. Information furnished by Home Skinovations Ltd. is believed to be accurate and reliable at the time of publication. However, Home Skinovations Ltd. assumes no responsibility for its use. No license is granted by its implication or otherwise under any patent or patent rights of Home Skinovations Ltd.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Home Skinovations Ltd. Data is subject to change without notification.

Home Skinovations Ltd. has patents and pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property rights except as expressly provided in any written agreement from Home Skinovations Ltd. Specifications are subject to change without notice.

Silk’n and the Silk’n logo are registered trademarks of Home
Skinovations Ltd.
Invention Works B.V.
Donk 1B, 2991 LE Barendrecht, The Netherlands
www.silkn.eu – info@silkn.eu

Device parts

LED Face Mask (1x)
Elastic straps (2x)
Remote control (1x)
Power button
Auto/Manual button
USB cable (1x)

General information

These operating instructions accompany this LED Face Mask ND-FM01 (referred to below only as the “product”). It contains important information about start-up and handling. Before using the product, please read through the operating instructions carefully. This particularly applies to the safety instructions. You can also find these operating instructions in PDF format on our website www.silkn.eu.

Intended use

This product is intended to recover your skin’s glow and elasticity. It also enhances skin metabolism, promotes anti-ageing effects, reduces inflammation and battles inflammation, acne, age spots and wrinkles. The product can be used on oily, dull and inflamed skin, but is also suitable for skin with pigmentation and large pores.

This device is intended for household use only, not for commercial applications.

Safety

Only use the product as described in these operating instructions.
Any other use is considered improper and may result in damage to property or persons. The manufacturer or vendor cannot be held liable for damages or injury incurred through improper or incorrect use. Before first use, please check if the product is complete. If there is any omission or if the product is not working properly, please contact customer service.

Safety instructions

This device, including all its parts, must not be used by the following people: children, adults with limited physical, sensory or psychological capacities, those lacking experience or knowledge in how to use the device in a safe way, or those who do not understand the hazards involved.
Children must not play with the product. Cleaning and user maintenance must not be performed by unsupervised children.
Before treating an area for the first time, perform a skin sensitivity test by placing the product on one of your arms. If you have no adverse reaction, start your treatment.
Only use the included USB cable to charge the remote control.
It cannot be used for other purposes. Connect the USB cable to a compatible USB power source that is easily accessible so that you can quickly disconnect it if something goes wrong.
If the product is damaged in any way, stop using it. Contact our customer service for replacement or repair to avoid risk. Liability and warranty claims are waived in the event of repairs performed by the user, improper connection or incorrect operation.
Do not use the product while charging.
Keep the product and USB cable away from water or any other liquids. They are not waterproof.
Never touch the product or USB cable with wet or damp hands.
Stop using the product immediately if you feel any discomfort, develop any abnormal reactions (such as itching or uncomfortable inflammation) or in case your skin becomes warm to the point of discomfort.
This product cannot be used by pregnant women, children, people with epilepsy, thyroid patients, people using thyroid medications, people who are photoallergic or use light allergy medication.
This product cannot be used on skin diseases, wound ulceration, trauma and post-operative wounds.
Don’t use the product for more than 15 minutes per treatment.
Consult your physician if you are uncertain whether or not you can use the product.

Charging

When the battery is low, the indicator light on the remote control will ﬂash and the product will automatically shut down after ﬂashing 10 times.

Connect the remote control [3] to the mask [1] .
Plug the USB cable [6] into the charging port of the remote control.
Plug the other end of the USB cable [6] into a compatible USB power source. One to three indicator light(s) on the remote control [3] will light up. When charging is complete, all four indicator lights are lit.

Assembling

Connect the remote control [3] to the mask [1] .
Fasten the elastic straps [2] to the mask [1] .

Operation

Assemble the product as described in Chapter “Assembling”.
Thoroughly clean and dry the face and hands. Make sure they are free from any makeup or dirt.
Sit or lie down and place the mask [1] over your face. Adjust the elastic straps [2] to ensure the mask ﬁts comfortably.
Turn on the device and select the desired mode. The product has two modes. In the Manual Mode a preferred treatment can be selected: Red, Blue, Yellow or Purple LED light therapy. One treatment takes 10 minutes.
In the Automatic Mode a preferred treatment cannot be selected. The product is activated in the following order: Red (5 min.), Blue (3 min.), Yellow (4 min.) and Purple (3 min.) LED light therapy.

Manual Mode:

Take the remote control [3] and long press the power button [4] to turn on the device. It will enter into the Manual Mode with Red LED light therapy by default.
Short press the power button [4] again to switch to the Blue LED light therapy.
Short press the power button [4] a third time to switch to the Yellow LED light therapy.
Short press the power button [4] a fourth time to switch to the Purple LED light therapy.
Short press the power button [4] a fifth time to turn off the product. In addition, if you want to turn off the product during your treatment, you can also long press the power button [4] .
Please note, when selecting a treatment the indicator light below the “M” ﬂashes 5 times. This means that the product will automatically start a timer of 10 minutes. After 10 minutes the product will automatically shut down, or long press the power button [4] to shut the product off during use.

Automatic Mode:

Take the remote control [3] and long press the power button [4] to turn on the device. It will enter into the Manual Mode with Red LED light therapy by default.
Short press the Auto/Manual button [5] to switch to the Automatic Mode.
Please note, when selecting the Automatic Mode the indicator light below the “A” ﬂashes 5 times. This means that the product will automatically start a timer of 15 minutes. After 15 minutes the product will automatically shut down, or long press the power button [4] to shut the product off during use.

Don’t use the product for more than 15 minutes per treatment.
It is recommended to close your eyes during use.

5. Apply a serum and/or day/night cream after treatment.

Treatment programme

If you are using the product for the ﬁrst time, please stick to the following schedule:

First week: use once every 3 days, max. 10 minutes at a time.
Second week: use once every 2 days, max. 10 minutes at a time.
Third week: use once every 2 days, max. 10-15 minutes at a time.
Fourth week: use once every day, max. 10-15 minutes at a time. Treat your skin once or twice per week as soon as the results show.

Cleaning

Make sure to unplug the product before you clean it. Then, clean the silicone side (face side) of the mask with a water based wipe or damp clean cloth. Make sure to dry it afterwards with a dry cloth.

Storage

After cleaning, we recommend you to store the product in its original box. Store the product in a cool dry place.

Technical data

Model number: ND-FM01
Material: Food grade silicon & cotton
Rated voltage: 3.7V
Battery capacity: 1500mAh
Unit weight: 250 g
Number of LED lights: 90
Dimension (L × W × H): 43 × 277 × 207 mm

Warranty

This product is covered by a 2-year warranty according to European regulations and law. The extent of the warranty on this product is limited to technical defects caused by faulty production processes. In the event you want to claim warranty please be sure to contact our customer service for instructions. They may be able to solve your problem without needing to return the product to the store or our service centre. Our customer service is always pleased to help you!

Customer service

For more information about the products of Silk’n visit your regional Silk’n website: www.silkn.eu. If the device is damaged, defective, in need of repair or you need our assistance, please contact your nearest Silk’n service centre. This manual is also available as a PDF download from: www.silkn.eu.

Service number: 0906-2130009
Email: customercareuk@silkn.eu / info@silkn.eu

Invention Works B.V.
Donk 1B, 2991 LE Barendrecht
The Netherlands
InnoEssentials Deutschland GmbH
Bahnhofstr. 7, 49685 Emstek
Deutschland
www.silkn.eu • info@silkn.eu

FIG 2 Product Feature