8BitDo Xbox Series X Ultimate Wired Controller Instruction Manual
- June 6, 2024
- 8Bitdo
Table of Contents
8BitDo Xbox Series X Ultimate Wired Controller Instruction Manual
Product Overview
Connectivity
Xbox Series X / Xbox Series S / Xbox One
Connect the controller to your Xbox Series /US and box One via its USB cable, wait till the status LED becomes solid to play
Windows10
Connect the controller to your Windows device via its USD cable, wait till the status LED becomes solid to play
required system: Windows101903 or above
Button Swap
- press and hold any two of A/B/X/Y/LB/RB/LSB/RSB buttons you would like to swap
- press the star button to swap them, profile LED blinks to indicate the success of the action
- press and hold any of the two buttons which have been swapped and press the star button to cancel it
- button mapping goes back to its default mode when controller is turned off
- please visit support.8bitdo.com for further information and assistance
Volume Control
- Beeps when adjusted to maximum/minimum
- Vibration when adjusted to the middle value
-
press and hold profile + up/down to turn up/down in-game volume
-
press and hold profile + left/right to adjust the balance between voice and game volume
Ultimate Software
- 8BitDo Ultimate Software gives you elite control over every piece of your controller customize button mapping, adjust stick & trigger sensitivity, and control vibration power
- please visit app.8bitdo.com for the application
- profile LED lights up when profile is enabled
Support
please visit support.8bitdo.com for further information and additional support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>