8BitDo 24GRMK Retro Keyboard User Manual

8BitDo 24GRMK Retro Keyboard

Product Information

Specifications:

• FCC Regulatory Conformance: Part 15 of FCC Rules
• RF Exposure: Complies with FCC radiation exposure limits for uncontrolled environment

Product Usage Instructions

FCC Regulatory Compliance:
This device complies with Part 15 of the FCC Rules. When using the device, please adhere to the following conditions:

1. This device should not cause harmful interference.
2. The device must accept any interference received, including undesired operation.

For optimal performance and compliance with FCC regulations, consider the following:

• Reorient or relocate the receiving antenna if needed.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit from the receiver.

If you encounter any issues or need assistance, consult the dealer or an experienced radio/TV technician.

RF Exposure:
To ensure compliance with FCC radiation exposure limits, use this equipment in an uncontrolled environment as specified by the regulations.

FAQ :

Q: What should I do if I experience radio or TV interference?
A: If you experience interference, try reorienting the antenna, increasing separation between devices, or consult a professional for assistance. Unauthorized modifications may void your authority to operate the equipment.

Retro Mechanical Keyboard

1. — Mode switch
2.  Volume knob
3. — Pair button
4. — Connection indicator
5. — Star button
6. — Key mapping indicator
7. — Profile button
8. – Profile indicator
9. – Programmable key
10. – Power status indicator
11. — Interfaces for 8BitDo Super Buttons
12. — Charging port(USB Type C)
13.  2.4G Receiver/ Receiver compartment
14. — 8BitDo Dual Super Buttons

2.4G connection

1. turn the mode switch to 2.4
2. connect the 2.4G receiver to the USB port of your device
3. the connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection

follow the steps below to re-pair the keyboard and receiver:

1. turn the mode switch to OFF
2. hold the pair button for 3 seconds to enter its pairing mode, the connection indicator starts to blink rapidly, connect the 2.4G receiver to the USB port of your device
3. wait for the keyboard to automatically pair with the receiver, the connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection

Wired connection

1. turn the mode switch to OFF
2. connect the keyboard to the USB port of your device and wait until the keyboard is successfully recognized by your device before using it

Bluetooth connection

1. turn the mode switch to BT
2. press and hold the pair button for 3 seconds to enter its pairing mode, the connection indicator starts to blink rapidly.(this is required for the very first time only)
3. go to your device’s Bluetooth list and pair with [8BitDo Retro Keyboard], the connection indicator will remain solid for 8 seconds and then go off to indicate a successful connection

Battery

200 hours of usage time with a 2000mAh built-in battery, rechargeable with 4 hours charging time

Fast key mapping

• the fast key mapping only copies the key function temporarily and will not work after shutting down or reconnecting. Please use the Ultimate Software to make permanent modifications
• the key mapping indicator blinks continuously when the mapped programmable key is pressed
• hold the star button for 3 seconds to cancel all the fast key mapping, the key mapping indicator will blink 3 times
• press the star button + any other key + programmable key to copy the key to the programmable key

Ultimate Software

please visit app.8bitdo.com to get the 8BitDo Ultimate Software, which allows you to customize key mapping, macro and more

Support
please visit support.8bitdo.com for further information & additional support

FCC regulatory conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>