8BitDo ZERO Controllers User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo ZERO Controllers User Manual
Instructions
Bluetooth Connection
Android + Windows + macOS
- Press and hold START for 2 seconds to power on the controller, LED will blink once per cycle.
- Press and hold SELECT for 2 seconds to enter pairing mode. Blue LED will rapidly blink.
- Go to your Android/Windows/macOS device’s Bluetooth setting, pair with [8Bitdo Zero GamePad] .
- LED will be solid blue when connection is successful.
Camera Selfie Mode
- To enter camera selfie mode, press and hold SELECT for 2 seconds. LED will rapidly blink.
- Enter your device’s Bluetooth setting, pair with [8Bitdo Zero GamePad].
- LED will be solid blue when the connection is successful.
- Enter your device’s camera, press any button of the following to take photos.
Android: A/B/X/Y/UR
IOS: D-pad
Battery
| Status | LED Indicator |
|---|---|
| Low battery mode | LED blinks in red |
| Battery charging | LED blinks in green |
| Battery fully charged | LED stops blinking in green |
Support
Please visit support.8bitdo.com for further information and additional support
FAQ – Frequently Asked Questions
Can multiple ZERO controllers be used at a time to play games?
Yes, you can. Just connect them via Bluetooth connection, as long as the device can take multiple Bluetooth gadgets.
What systems does it work with? Does it auto reconnect to those systems?
It works with Windows 10, iOS, macOS, Android, Raspberry Pi.
It does auto reconnect to all the systems mentioned above with the press of
START once they have been successfully paired.
How does the LED indicator work?
A. LED blinks once: connecting to Android, Windows 10, Raspberry Pi, macOS
B. LED blinks 3 times: connecting to iOS
C. LED blinks 5 times: camera selfie mode
D. Red LED: low battary
E. Green LED: battery charging (LED turns off when battery is fully charged)
How do I charge the controller? How long does the battery last when fully charged?
We suggest you charge it via a phone power adapter.
The controller uses 180mAh rechargeable battery with 1 hour charging time. The
battery can last up to 20 hours when fully charged.
Can I use it wired, via a USB cable?
No, you can not. The USB port on the controller is a power charging port only.
Does it work with 8BitDo Bluetooth receivers/adapters?
Yes, it does.
What is the Bluetooth range?
10 meters. This controller functions the best within the range of 5 meters.
Can I upgrade the firmware of this controller?
No, you can not.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>