8BitDo Cube Speaker User Manual

June 3, 2024
8Bitdo

8BitDo Cube Speaker User Manual

Everything Old Is New Again

Thank you for purchasing our BBitdo Cube Speaker.
Read carefully and follow all instructions in this User’s Manual before you use 8 Bitdo Cube Speaker. Keep this User’s Manual in a convenient location for future reference.

Safety Instructions

This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below:

  • Always position the unit on a stable and level surface. Unstable surface can cause the unit to topple and fall, resulting in possible damage or injury
  • Do not drop, unpack, open, beat, curve, prink and burn the unit
  • Avoid using the unit nearby basins or sinks where it may come in contact with water
  • Do not place any ware with full water on the top of the unit, such as vase, glass, pot, and please avoid placingcandle on the speaker surface as well
  • Protect the using of the unit from any overheating devices {such as radiator, heating installation, cooking stove or other heating devices)
  • Regardless of what reasons cause the unit damage, please ask for the maintenance personnel to repair
  • If you want to do the cleaning, please turn off the unit and unplug the power cable from the outlet first R
  • Set the volume properly to prevent injury to the unit and your health

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.They can take this product for environmental safe recycling.

WARNING:

  • The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
  • No naked flame sources, such as lighted candles, should be placed on the apparatus.
  • CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Package Content

1. 8Bitdo Cube Speaker main unit x 1
2. USB charging cable x 1
3. Aux cable x 1
4. User’s manual x 1

Fit Models

  • Apply to: all iPhone and iPad series, Smartphones, Laptop, Tablets and other Bluetooth devices
  • Work with any device with standard 3.5mm earphone jack via the included Aux cable for connecting, such as MP3, PSP, Mobile phone … ,etc

Outstanding Feature

BBitdo Cube Speaker is compatible with all wireless Bluetooth devices such as iPad, iPhone, Smartphones, Laptops, Tablets and other Bluetooth devices. It is portable, wireless, hands-free. Just place it anywhere in a room and enjoy pristine streaming audio from your phone, computer, or other Bluetooth devices. Bring music, movies, and all your mobile audio vibrantly to life–all in the palm of your hand .

  • Go Anywhere and Go Wireless
    Easily compatible with iPhone, iPad, mobile phones, computers, tablets, or any other Bluetooth-enabled device Wireless working range is up to 8-12 meters, no cords, no hassle

  • Calling and Conference on the Go
    With a powerful, built-in microphone, it can frees you to share clean-sounding conference calls or personal calling anywhere–in the office, car, at home, alone, or with a group

  • Good sound system, enjoy your life
    Special speaker drive unit with woofer, amp up your Music, Movies, Games to let you experience the richest sound Built-in rechargeable battery, up to 6 hours of continuous play

  • Crafted outlook and function design
    AUX IN, almost work with any player
    Sleep mode to save the battery for long time play

Parts Name

Diagram

Main unit
1. Power on/Power off
2. Volume –
3. Multi-function button (play/ pause/ speaker)
4. Volume +
5. USB charging port
6. Charging indicator
7. Bluetooth indicator
8. AUXIN

Basic Operations

Power on/Power off

1. Power on: Holding power button until hearing starting sound.
2. Power off: Holding power button until hearing ending sound.

Connection

1. Work with phone
Power on the unit, and coming with a short Bluetooth hint sound from the unit, the Bluetooth function is on, the blue Bluetooth indicator lights up at the same time, these show the unit is enter pairing mode.
Turn on the Bluetooth function in your phone, and search the Bluetooth device, then, your phone will find the device named “8B itdo Cube”, A tone will sound to confirm the device has paired successfully.
Note: Please reference the User’s manual of your cell phone for the details about Bluetooth connection.

2. Work with tablet PC
Please refer to the above phone connection operation steps.

3. Work with laptop/ notebook computer /PC
As the Bluetooth version for laptop/ notebook computer /PC is various, the connection methods are different as well, if you can not connect with the unit for play on first use, you may need to install a new version of the Bluetooth driver in your laptop in advance. Please reference the instructions of laptop for details.

Play Mode

1. Bluetooth mode: play music via Bluetooth connection.
2. AUX mode: play music via AUX cable.
Note: Bluetooth mode is unavailable when speaker in AUX mode.

Play the music

Play music via Bluetooth
1. Follow the steps above to pair the Bluetooth device and the unit.
2. Enter in the Bluetooth device audio play menu, choose your favorite music to play.
3. Press the multi-function button to pause or play your music as you need.
4. Holding -/+ button to adjusting volume, press-/+ button to next/previous music.
AUXIN:
1. Connect the audio device via Aux cable to the “Aux IN” port at the back of unit.
2. Choose directly your favorite music in the audio device to play
Note: Next/Previous music function is unavailable at AUX IN connection.

Adjusting the volume

1. Press the volume button on the unit or control the audio device volume directly to adjust the volume
Note: NexUPrevious music function is unavailable at AUX IN connection.

Hands free function

1. The unit will play your phone ringtone when there is a incoming call
2. At this time, press the multi-function button to answer the phone, and talk through the microphone

Charge

1. Connecting to any standard USB port via micro USB cable. (such as PC, USB power adapter .. etc.)
2. The charging indicator will light up while charging
3. It will be fully charge in 2.5 hours.
4. The charging indicator working mode:
Red LED on: the unit is charging
Red LED off: the battery is fully charged
Note: if the unit is not to be used longer than 7 days, please charge the unit for 10 minutes before turn on the unit.

Technical Parameter

Note: All specifications are subject to change without notice.
Product Name: 8Bitdo Cube Speaker
Power Supply: USB 5V
Built-in Lithium Ion batteries: 3.7V 800mAh
Output power: RMS 3W
Bluetooth Profile Supported: A2DP, AVRCP
Working range: up to 8-12m
Working atmosphere: 0°C-40″C/20%-90%RH

Maintanance

Please follow the instructions below before clear the unit

  • Power off the unit first before clear
  • Use a soft, dry, lint-free cloth to wipe gently
  • Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored Storage
  • If the unit will not be used for an extended period of time, power off the unit and place the unit with accessories into the package
  • Do not set the unit in a damp, high temperature or the sun point-blank place

Troubleshooting

Question: Can’t pair successfully after multiple connections?

Solution:
1. Check if the blue Bluetooth indicator lights on, if the indicator goes off, please slide the ON/OFF switch to “ON”, if the blue Bluetooth indicator doesn’t light on yet, please charge the unit
2. Perhaps there are many Bluetooth devices around the surroundings to interfere the searching, please close the Bluetooth function in the device you don’t need
3. Power off and then power on the unit, to restart the Bluetooth function of the unit or your Bluetooth device
4. Unplug the AUX cable from the unit, and re-pair the unit and the Bluetooth device

Question: The sound occurs staccato when play?

Solution:
1. Make sure the working distance is in 8-12m
2. Clear away the block between the unit and the Bluetooth device to prevent the poor connecting
3. Please check if the unit and the Bluetooth device is in low battery, if so, please charge the unit and your Bluetooth device

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.


FAQ – Frequently Asked Questions

What is the difference between this speaker and TwinCube speakers?

The differences are:

A. Colour
B. Cube Speaker is a singular speaker. There are two speakers in the TwinCube speaker set
C. TwinCube Speakers also function as a set of stereo speakers when synced together

Can I connect this speaker to Switch?

Yes, you can. This can be achieved via the audio cable included in the packaging. Just plug the cable into the AUX IN port on the primary speaker and your Switch.

Note: Bluetooth connection is not applicable here.

Can I put a SD card into it?

No, you can not.


Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals