TELLUR TLL151311 Qi 15W Wireless Fast Desk Charger User Manual
- June 3, 2024
- Tellur
Table of Contents
Qi Wireless Fast Desk Charger 15W TLL151311
TLL151311 Qi 15W Wireless Fast Desk Charger
User manual
INTO YOUR GRE2N FUTURE
Thank you for choosing Tellur! Please read this user manual carefully before using the product and keep it safe for future reference. Please note! Damages caused by misuse of the product will not be covered by the product’s warranty.
Technical specifications
Input: DC 5V/3A 9V/1.67A 12V/1.5A Input port: Type-C Total output: Adaptive, 15W(Max), 10W, 7.5W, 5W Cable length: 1 meter (Type-C, 2A) Charging coils: 2 Charging conversion rate: >73% Material: Wheat straw fiber 35% + 65% ABS Safety protections: Overvoltage protection, temperature control and foreign object detection Color: Cream Size: 128 x 71 x 15mm Weight: 128 gr Package includes: 1 x Qi Wireless Fast Desk Charger 1 x Type-C cable 1 x User manual Product compatibilities:
- Fast charging* supported by iPhone 13 mini/ 13/ 13 Pro/ 13 Pro Max/ iPhone 12 mini/ 12/ 12 Pro/ 12 Pro Max, iPhone 11/ 11 Pro/ 11 Max, iPhone XR/ X/ XS Max/ XS, iPhone8/ 8 Plus, Samsung Note 20 Ultra/ Note 20/ S21 Ultra/ 5214 S21/ S20 FE/ S20 Ultra/ S20+/ S20/ S10+/ S10/ S10e/ S9/ S9+/ S8/ Note 8/ S7 Edge, Google 5, LG G6, LG G6 Plus, LG V30 and other Qi compatible devices
- Standard wireless charging for all Qi enabled devices *Min. QC2.0 fast charger adapter required for fast wireless charging (not included)
Product diagram
- Plug the Type-C port of charging cable into the wireless charger and the USB A port to a power adapter. The LED indicator will turn blue, flash 3 times, then turns off. 2.
- Place your Qi-enabled device on the wireless charging surface. The device will recharge automatically, and the LED indicator will light up in blue color.
- The LED indicator will turn red and flash if the charger is malfunctions.
CAUTION FOD (Foreign object detection) will activate automatically if a metal or magnet object is detected near the charging area. Please remove the metal objects from the charger. Put your Qi enabled smartphone (or a smartphone with Qi wireless charging card) at the center of the wireless charging area. If the charger and the smartphone communicate successfully, your phone will begin to recharge automatically. When the device’s temperature is too high, the wireless charger will stop charging and resume operation once the temperature drops. Keep the product away from water while charging. Once the charging is complete, disconnect the product from the power source. Do not disassemble or throw into fire or water, to avoid causing a short circuit. Do not use wireless chargers in severely hot, humid, or corrosive environments. Do not place too close to objects with magnetic stripes or chip (ID cards, bank cards, etc.) to avoid demagnetization. Please keep a distance at least of 20 cm between implantable medical devices (pacemakers, implantable devices, etc.) and the wireless charger, to avoid potential interference. This product is not a toy, please keep it away from children to avoid unnecessary accidents.
Troubleshooting
- Check if the power outlet or adapter is working properly.
- Check the adapter output power (must be 5V/2A or QC2.0/QC3.0 for fast charging)
- Check the integrity of the charging cable
- Unplug and plug the charging cable
- Make sure the phone is QI wireless charging compatible
- Remove the phone case and try again.
DISPOSAL AND RECYCLING INFORMATION
The crossed-out wheeled bin symbol on your product, battery, literature or
packaging reminds you that all electronic products and batteries must be taken
to separate waste collection points at the end of their working lives; they
must not be disposed of in the normal waste stream with household garbage. It
is the responsibility of the user to dispose of the equipment using a
designated collection point or service for separate recycling of waste
electrical and electronic equipment (WEEE) and batteries according to local
laws. Proper collection and recycling of your equipment help ensure EEE waste
is recycled in a manner that conserves valuable materials and protects human
health and the environment, improper handling, accidental breakage, damage,
and/or improper recycling at the end of its life may be harmful to health and
the environment.
For other languages please scan the QR code
https://www.tellur.com/manual-tll151311/
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ABN Systems International
Str. Marinaritor, nr.29 Sector 1, Bucuresti, Romania
004.021.233.09.95
officefateltur.com
officefdabnsystems.ro
www.tellur.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>