Letra Dymo Letratag LT100T User Manual
- June 16, 2024
- Letra
Table of Contents
Dymo-Letratag LT100T Manual
About Your New Label Maker
With your new DYMO LetraTag® label maker, you can create a wide
variety of high-quality, self-adhesive labels. You can choose to print
your labels in many different font sizes and styles. The label maker
uses DYMO LetraTag (LT) 12 mm label cassettes. LT cassettes are
available in multiple colors of plastic and metallic tape, and in white
iron-on tape.
Visit www.dymo.com for information on obtaining labels and accessories for
your label maker.
Warranty Registration
Please complete the warranty registration card and return it to the
appropriate Customer Support address within seven days. Visit
www.dymo.com/registration for details or to register online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker is powered by standard batteries. To save power, the label
maker will automatically turn off after two minutes of inactivity.
To clean the print head
1. Remove the label cassette.
2. Remove the cleaning tool from inside the label compartment cover.
If you do not have a cleaning tool, contact DYMO Customer Care
(http://support.dymo.com).
3. Gently wipe the padded side of the tool across the print head. See Figure
6.
Troubleshooting
Review the following possible solutions if you encounter a problem while using
your label maker.
Documentation Feedback
We are constantly working to produce the highest quality documentation for our
products. We welcome your feedback.
Send us your comments or suggestions about our user guides. Please include the
following information with your feedback:
• Product name, model number, and User Guide page number
• Brief description of instructions that are inaccurate or unclear,
areas where more detail is needed, and so on
We also welcome your suggestions about additional topics you
would like to see covered in the documentation.
Send email messages to: documentation@dymo.com
Please keep in mind that this email address is only for
documentation feedback. If you have a technical question, please
contact Customer Support.
This product is CE marked in accordance with the EMC directive and the low
voltage directive and is designed to conform with the following international
standards:
US FCC Class B Compatibility Safety
– EN 60950, IEC 950, UL 1950 EMC Compatibility EN 61000 3-2/3; EN 61000
4-2/3/4/5/6/8/11; ENV 50204;
EU Immunity
– EN 55024 & addendum A1, A2 Electromagnetic Compatibility (EMC) –
Information Technology equipment, Immunity Characteristics Emissions
– EN 61000-6-3: Electromagnetic Compatibility (EMC) – Part 6: Generic
Standards
– Section 3: Emission standard for residential, commercial and light
industrial environments. RoHS 2002/95/EC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>