AXAGON HUE-G1A 4 Port Superspeed USB-A Slim Hum W-Cable Holder Instructions

June 6, 2024
AXAGON

Axagon

AXAGON HUE-G1A 4 Port Superspeed USB-A Slim Hum W-Cable Holder

INSTRUCTIONS FOR USE

  1. Turn on computer.
  2. Connect the hub to the PC USB port.
  3. An automatic installation will be performed. No need to install any external drivers.
  4. The hub is ready.

PRODUCT SUPPORT LINK

http://axagon.eu/produkty/hue-g1a#supportLinkGoal

© 2021 AXAGON
All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate owners. Specifications are subject to change without prior notice. Made in CHINA for Axagon.

TECHNICAL SPECIFICATIONS

  • INPUT INTERFACE
    • USB 3.2 Gen 1 (USB 3.0) • USB 2.0
    • 5000 • 480 • 12 • 1.5 Mbit/s (Super • High • Full • Low Speed) USB Type A male connector
    • 14 cm FIXED USB CABLE
  • OUTPUT INTERFACE
    • 4 USB 3.2 Gen 1 ports with USB Type A female connectors
  • POWER SUPPLY
    • up to 0.5 Amp CHARGING on USB ports
    • power through USB bus
  • OTHER FEATURES
    • Over Current Protection
    • 2 HDD + 1 SSD can be connected at the same time AUTOMATIC INSTALLATION
    • Plug & Play • Hot Plug
  • OS SUPPORTED
    • WINDOWS XP • Vista • 7 • 8 • 8.1 • 10 & later
    • Server 2008 • 2012 • 2016 & later
    • 32 & 64bit versions supported
    • OS X 10.x & later
    • Linux 2.6.x & later

TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer. Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer. Do not use the product in humid or explosive environments and near flammable substances.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

AXAGON User Manuals

Related Manuals