AXAGON HUE-MSA 4-Port SuperSpeed USB-A Switch Instruction Manual
- June 6, 2024
- AXAGON
Table of Contents
AXAGON HUE-MSA 4-Port SuperSpeed USB-A Switch
INSTRUCTIONS FOR USE
- Turn on the computer.
- Connect the hub to the PC USB port.
- An automatic installation will be performed. No need to install any external drivers.
- The hub is ready.
INFO
Any USB charger and a suitable cable with a micro USB connector can be used for the external power supply of the hub (recommended charger output current is 2A).
Technical Specification
INPUT INTERFACE
- USB 3.2 Gen 1 (USB 3.0) • USB 2.0
- 5000 • 480 • 12 • 1.S Mbit/s (Super• High• Full • Low Speed) USB Type A male connector
- 20 cm FIXED USB CABLE
OUTPUT INTERFACE
- 4 USB 3.2 Gen 1 ports with USB Type A female connectors
POWER SUPPLY
up to 1.5 Amp CHARGING on USB ports power through USB bus or power through optional power adapter (SV/2A min)
OTHER FEATURES
APPLE CHARGING supported Over Current Protection up to 3 external disks can be connected at the same time AUTOMATIC INSTALLATION Plug & Play • Hot Plug
LED INDICATION the LEDs indicate that the USB port is switched on
OS SUPPORTED
- WINDOWS XP •Vista• 7 • 8 • 8.1 • 10 & later
- Server 2008• 2012 • 201 6& later
- 32 & 64bit versions supported
- OS X 1 O.x & later
- Linux 2.6.x & later
found TECHNICAL on the SUPPORT: product page More in the information, PRODUCT
FAQs, SUPPORT manuals tab and at drivers
www.axagon.com
Nothing helped? Write to our technical support:
support@axagon.cz
TECHNICAL SUPPORT
- More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz
- At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, contact your local authorities or the retailer who sold you the product.
- EU declaration of conformity: The device complies with the harmonization legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
- Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
- Do not use the product in humid or explosive environments and near flammable substances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>