AXAGON ADSA-FP3 Superspeed USB Adapter Instruction Manual
- June 6, 2024
- AXAGON
Table of Contents
AXAGON ADSA-FP3 Superspeed USB Adapter
INSTRUCTION
- Turn on the computer.
- Connect the USB adapter to the disk SATA connector.
- Connect the supplied AC adapter to the USB adapter power connector. No power adapter connection is required for 2.5″ HDD / SSD.
- Connect the adapter to the USB port of the computer.
- The hard disk will be detected and installed automatically.
INFO
If you want to disconnect the hard disk, make sure that data copying is finished and the data transfer indicator is not blinking.
TECHNICAL SUPPORT: More information, FAQs, manuals, and drivers can be
found on the product page in the PRODUCT SUPPORT tab at
www.hexagon.EU. Nothing helped? Write to our
technical support: support@axagon.cz.
At the end of its service life, do not throw the product into household waste;
take it to a collection point for electrical equipment recycling. For
information about collection and recycling programs in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/35/EU (LVD), 2014/30/EU (EMC) and
2011/65/EU (RoHS). The complete EU declaration of conformity is available from
the manufacturer. Before using the product, the user is obliged to read the
user’s instructions. The manufacturer disclaims any liability for damage that
may occur due to improper use of the product or failure to follow the
instructions contained herein. Product use other than specified must be
consulted with the manufacturer.
- Do not use the product in humid or explosive environments and near flammable substances.
- Protect the power adapter from water, do not operate it with wet hands; there is a risk of electric shock!
- Do not cover the adapter and allow access to air for sufficient cooling.
- Do not disassemble, modify, or attempt to repair the adapter.
- If the adapter is damaged, disconnect it IMMEDIATELY and do not use it again!
- Protect the adapter from high temperatures and mechanical damage.
- If you do not use the adapter, unplug it.
- Do not leave the adapter unattended.
Degree of Protection 20. The appliance is protected against contact with a finger; the appliance is not protected against water ingress. The appliance of protection class II according to IEC 60536 – appliance with double insulation. The appliance is intended for indoor use in standard conditions only.
- USB adapter
- power adapter
- multilanguage quick guide
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) • USB 2.0
5000 • 480 Mbit/s (SuperSpeed • HighSpeed)
USB Mass Storage Class
USB Type A male connector
OUTPUT INTERFACE
SERIAL ATA specification revision 3.1
6 • 3 • 1.5 Gbit/s (SATA/600 • SATA/300 • SATA/150)
All 2.5″ & 3.5″ SATA III / II / I HDD disks supported with all capacities
5.25″ SATA CD / DVD / Blu-ray
22-pin SATA data and power female
5 Gbit/s theoretically (given by USB input)
POWER SUPPLY
2.5″ SSD/HDD – power through USB bus
3.5″ HDD & 5.25″ ODD – power through included power adapter (12V/2A)
OTHER FEATURES
BOT (Bulk-Only Transport)
AUTOMATIC INSTALLATION
Plug & Play • Hot Plug • S.M.A.R.T.
Auto Spindown • HDD Turn Off
LED INDICATION
BLUE LED indicate connection to PC & HDD activity
OS SUPPORTED
WINDOWS XP • Vista • 7 • 8 • 8.1 • 10 & later
Server 2008 • 2012 • 2016 & later
32 & 64bit versions supported
OS X 10.x & later • Linux 2.6.x & later
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>