SERVER FP-200 Stainless Steel Pump Instruction Manual
- June 6, 2024
- SERVER
Table of Contents
SERVER FP-200 Stainless Steel Pump Instruction Manual
Stainless Steel Pump
for use with pouches with 16mm fitment
MODEL: FP-200 – 100410
Thank You
for purchasing our Stainless Steel Pump.
This quality NSF listed pump delivers precise portions and lasts for years of
service.
CONSISTENT PORTIONS—SERVE BETTER
PUMP PARTS
SAFETY
According to food and safety regulations, most foods must be stored and/or served at certain temperatures or they could become hazardous. Check with local food and safety regulators for specific guidelines.
Be aware of the product you are serving and the temperature the product is required to maintain. Server Products, Inc. cannot be responsible for the serving of potentially hazardous product.
IMPORTANT
Clean, rinse, sanitize, and dry parts daily or regularly to comply with local sanitization requirements.
NSF International lists this pump as “Not acceptable for dispensing potentially hazardous foods.”
PUMP CLEANING
CARE OF STAINLESS STEEL
This durable pump includes stainless steel components.
If you notice corrosion beginning on any stainless steel surface, you may need to change the cleansing agent, sanitizing agent, or the cleaning procedures you are using.
- A mildly abrasive nylon or brass brush may be used to remove any stubborn deposits.
- Fully rinsing and drying all parts can help prevent corrosion. Elements and minerals in tap water can accumulate on stainless steel parts and create corrosion.
- Do not use abrasive, caustic or ammonia based cleansers.
- Do not use products containing acids, alkalines, chlorine, or salt. These agents can corrode stainless steel.
- Do not use metal scrapers or cleaning pads that could scratch surfaces.
ASSEMBLY
WASH ALL PARTS PROPERLY BEFORE EVERY USE.
ATTACH POUCH TO PUMP
DISASSEMBLY
If pump has been in use, first rinse and flush pump. See PUMP CLEANING on page 4.
During disassembly, collect small parts in a container to prevent loss.
TROUBLESHOOTING
SERVER PRODUCTS LIMITED WARRANTY
This Server product is backed by a two-year limited warranty against defects in materials and workmanship. See Server-Products.com for details.
GENERAL SERVICE, REPAIR OR RETURNS
Before sending any item to Server Products for service, repair, or return, contact Server Products customer service to request a Return Authorization Number. Merchandise must be sent to Server Products with this number. Service is extremely prompt. Typically, units are repaired and ship out within 48 hours of receipt.
Merchandise being returned for credit must be in new and unused condition and not more than 90 days old and will be subject to a 20% restocking charge.
NEED HELP?
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
Chat with us!
spsales@server-products.com
262.628.5600 | 800.558.8722
Please be prepared with your Model, P/N and Series located on the lid or base of the unit.
_Example:
_
Manual EM_100679_RevA 030122
Documents / Resources
|
SERVER FP-200 Stainless Steel
Pump
[pdf] Instruction Manual
FP-200, 100410, Stainless Steel Pump
---|---
|
SERVER FP-200 Stainless Steel
Pump
[pdf] User Guide
100678RevA, FP-200 Stainless Steel Pump, FP-200, Stainless Steel Pump, Steel
Pump, Pump
|
SERVER FP-200 Stainless Steel
Pump
[pdf] User Guide
FP-200 Stainless Steel Pump, FP-200, Stainless Steel Pump, Steel Pump, Pump
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>