SERVER 88000 Eco 1 oz Stainless Steel Condiment Pump User Guide

: October 30, 2023
: SERVER

Table of Contents

SERVER 88000 Eco 1 oz Stainless Steel Condiment Pump
Product Information
Usage Instructions
INSTALLATION INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SERVER 88000 Eco 1 oz Stainless Steel Condiment Pump

Product Information

The Server Eco PumpTM is a product designed for dispensing various food products. The pump is made up of several parts including the head assembly piston, seal, pinch valve, gaging collar, cylinder, spring, o-ring and lid. It can be easily installed into product containers and is designed to eliminate air bubbles and dispense only the product.

Usage Instructions

Remove pump from the box and disassemble it. Wash, rinse, and sanitize all the pump parts properly before use.
Install the seal onto the head assembly piston. Apply a small amount of food equipment lubricant inside the seal. Ensure that the flared end of the seal faces away from the piston head. Install the pinch valve securely to the seal end. Squeeze the pinch valve open before installation.
Install the gaging collar onto the side of the head assembly piston.
Insert the spring into the cylinder and then add the o-ring onto the cylinder by pushing it down overall threading on the cylinder.
Insert the pump into the product container. Prime the pump by continuously pressing on the pump until any air bubbles are eliminated and only the product is dispensed.
Add the lid onto the cylinder.
Install the head assembly into the cylinder. Apply a small amount of food equipment lubricant to the outside of the seal. Slide the locking collar down onto the cylinder threading. Tighten firmly.
To clean-in-place without disassembly, refer to the manual by scanning the QR code below and looking up your part number in the search bar to find complete instructions.

For further information on using and maintaining the Server Eco PumpTM, refer to the manual available at server-products.com/manual-more. For any queries, you can contact spsales@server- products.com or call 800.558.8722.

INSTALLATION INSTRUCTION

Remove the pump from the box and disassemble then wash, rinse, and sanitize all pump parts properly before use.
Install seal onto head assembly piston. Apply small amount of food equipment lubricant inside seal. Flared end of seal should face away from piston head. Install pinch valve securely to seal end. Squeeze pinch valve open before installation.
Install gaging collar onto the side of the head assembly piston.
Insert spring into the cylinder and then add an o-ring onto the cylinder by pushing it down overall threading on the cylinder.
Add the lid onto the cylinder.
Install the head assembly into the cylinder. Apply a small amount of food equipment lubricant to the outside of the seal. Slide the locking collar down onto the cylinder threading. Tighten firmly.
Insert pump into product container. Prime pump by continuously pressing on the pump until any air bubbles are eliminated and only product is dispensed.
This pump can also be cleaned in place without disassembly. For complete instructions for cleaning-in-place, scan the QR code below and look up your part number in the search bar to find the manual.

WANT TO LEARN MORE?
Visit server-products.com/manual-more for your manual, part breakdown, support videos, and more. spsales @server-products.com | 800.558.8722

REFERENCE YOUR PART NUMBER (P/N) LOCATED ON THE LID OR BASE.