SERVER Eco Pump for 38 mm Bottle User Guide

SERVER Eco Pump for 38 mm Bottle

Product Information: Server Eco PumpTM

The Server Eco PumpTM is a pump designed for dispensing sauces, dressings, and condiments in foodservice settings. It is a durable and reliable pump that can be used with a variety of containers up to one gallon in size. The pump is made of high-quality materials that are easy to clean and maintain.

Product Usage Instructions:

1. Remove the pump from the box and disassemble it.
2. Wash, rinse, and sanitize all parts before use.
3. Install the O-ring into the seal and apply food equipment lubricant on the O-ring.
4. Install the seal onto the head assembly piston. Apply a small amount of food equipment lubricant inside the seal. The flared end of the seal should face away from the piston head. Install the pinch valve securely to the seal end. Squeeze the pinch valve open before installation.
5. Install the gaging collar(s) onto the side of the head assembly piston to reduce portion size.
6. Insert the spring into the cylinder.
7. Snap the cap onto the cylinder. Press firmly to secure the cap down overall threading on the cylinder.
8. Install the head assembly into the cylinder. Apply a small amount of food equipment lubricant inside the top of the cylinder and outside of the seal. Slide the locking collar down onto the cylinder threading. Tighten firmly.

Once you have completed these steps, your Server Eco PumpTM is ready to use. Simply place it on top of your desired container and begin pumping. The pump dispenses a consistent portion size with each stroke, making it easy to control portions and reduce waste. If you need further assistance, you can refer to the manual, part breakdown, support videos, and more on the server- products.com/manual-more website. You can also contact spsales@server- products.com or call 800.558.8722 for additional support.

Tips and tricks to help you get started with your new Eco Pump™.

HOW TO INSTALL

1. Remove pump from box and disassemble then wash, rinse, and sanitize all parts properly before use.
2. Install the O-ring into seal. Apply food equipment lubricant on O-ring.
3. Install seal onto head assembly piston. Apply small amount of food equipment lubricant inside seal. Flared end of seal should face away from piston head. Install pinch valve securely to seal end. Squeeze pinch valve open before installation.
4. Install gaging collar(s) onto side of head assembly piston to reduce portion size.
5. Insert spring into cylinder.
6. Snap cap onto cylinder. Press firmly to secure cap down overall threading on the cylinder.
7. Install head assembly into cylinder. Apply a small amount of food equipment lubricant inside top of the cylinder and outside of seal. Slide the locking collar down onto the cylinder threading. Tighten firmly.

WANT TO LEARN MORE?
Visit server-products.com/manual-more for your manual, part breakdown, support videos and more.
spsales@server-products.com | 800.558.8722

2 YEARS WARRANTY
REFERENCE YOUR PART NUMBER (P/N) LOCATED ON THE LID OR BASE.

References

• products.com
• Search our Website for Equipment Manuals & More
• Search our Website for Equipment Manuals & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>