SERVER Eco Pump User Guide
- October 30, 2023
- SERVER
Table of Contents
SERVER Eco Pump User Guide
Tips and tricks to help you get started with your new Eco Pump™.
Installation
-
Remove pump from box and disassemble then wash, rinse, and sanitize all pump parts properly before use.
-
Install seal onto head assembly piston. Apply small amount of food equipment lubricant inside seal. Flared end of seal should face away from piston head. Install pinch valve securely to seal end. Squeeze pinch valve open before installation.
-
Install gaging collar onto side of head assembly piston.
-
Insert spring into cylinder. For BP 1/2, add extension tube to bottom of cylinder to extend length.
-
Snap cap onto cylinder. Press firmly to secure cap down over all threading on cylinder
-
Install head assembly in cylinder. Apply small amount of food equipment lubricant inside top of cylinder and outside of seal. Slide locking collar down onto cylinder threading. Tighten firmly.
-
Insert and secure pump to product container. Tighten cap very firmly onto product container threading.
-
Prime pump by continuously pressing on the pump until prime is achieved.
-
This pump can also be cleanedin-place without disassembly. For complete instructions for cleaning-in-place, scan the QR code below and look up your part number in the search bar to find the manual.
WANT TO LEARN MORE?
Visit server-products.com/manual-more for your manual, part breakdown, support videos and more.
spsales@server-products.com |
800.558.8722
References
- products.com
- Search our Website for Equipment Manuals & More
- Search our Website for Equipment Manuals & More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>