Hommie Pet Nail Grinder User Manual

Hommie Pet Nail Grinder

Thanks for choosing this product. Please read this [User Manual] carefully before use and keep this instruction for future reference. Any problems about this product, please feel free to contact us at: hommiehk@hotmail.com.

Important Notes:

1. When using for the first time, please charge the product first. Use the SV USB charging port (eg: SV 1 A charger) to charge. (Note: The indica­tor light is red when charging, and the light turns to blue once it is fully charged.)
2. At the first use, you can show the grinder to your pets and let them smell/ listen to the rotat­ing sound, which will reduce their fear. Then start using it after they getting familiar: In the beginning, you can use the low speed gear, and then switch to the high speed gear after your pets adapt to that.
3. Put your pets on a large and flat surface when using this product for them, not on a high platform to prevent pets from fearing height. You can also reward the pets with snacks simul­taneously.
4. Please do not clean the product by water flush. The surface should be cleaned with a dry cleaning cloth.

Product Diagram

Usage of The Electric Nail Grinder

1. Choose the suitable port for using:
   A: port is used for the final stage of grinding nails.
   B: port is used for grinding the edge of nails. C port is used for quickly grinding the sharp or long nails.

2. Slide the switch forward/reverse to select the appropriate gear. It is recommended to choose the low speed gear at the beginning when used for small pets, and then choose the high speed gear as needed.

3. Pinch the pet’s claw with your thumb and forefinger, gently place the pet’s nail into the hole of the grinder, and start trimming pet’s nails. The grinding time shall not be longer than 5 seconds each time.

Warm Tips

1. If it’s the first time to use grinder for your pets, it would be better to only grind off the nail tip or the part that is too long. Don’t grind it too deep, so that your pets could get used to the grinder!
2. Please clean the impurities on the nail grind­ing wheel surface or replace with a new one when the nail grinding effect is reduced.

Cleaning

1. Rotate the protection cap of the nail grinding wheel anticlockwise and take it down.
2. Then use two fingers to squeeze the wheel head and pull out the grinding wheel.
3. Lastly, insert the grinding wheel into the fixed hole after cleaning or replace with a new one.

• It’s normal that the product will warm up during the usage or charging.

Specifications

Material: 1653532mm
Rotating Speed:   1. 6500RPM/min  2. BSOORPM/min
Working Time: 10-14hours
Battery Capacity: 2000mAh
Charging Time: 5 hours (SV 1A charger/ USB charging port)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>