KSIX 8427542983363 Smart Universal Remote Control User Guide

KSIX 8427542983363 Smart Universal Remote Control

Technical specifications

• Wireless Wi-Fi connection: 2.412 GHz-2.484 GHz
• Compatible network protocol: IEEE 802.11B/G/N
• Input parameters: 5V/1A
• Infrared frequency: 38 KHz
• Infrared range: ≤ 8 m
• Operating temperature: 0Cº – 50Cº

Product description

Sync the Smart IR Remote to your mobile device

Before you begin, keep in mind:

• You must connect the IR remote control to a Wi-Fi 2.4 GHz network. If your router is a dual-band router, make sure that you select the 2.4 GHz band.
• Your mobile device must be connected to the same 2.4 GHz Wi-Fi as the IR re-mote control.
• To sync the IR remote control, you will need to connect it to a power outlet* lo-cated as close as possible to your Wi-Fi router, even though this may not be where the IR remote control will be used later. That way, you can ensure that connection will occur quickly and correctly.

Note: To connect the Smart IR Remote to a power outlet you will need a USB charger not supplied.

1. Download and install the Smart Life app or the Tuya app, available on the iTunes Store and Google Play.
2. Once the installation is complete, open the app and create an account using your e-mail address.
3. Select “Create home” and configure your home.
4. Log into the “My Home” section and select Add Device
5. Choose the “Others” and “Infrared universal remote” device type.
6. Connect the IR remote control to a power source located as close as possible to your Wi-Fi router and turn it on. Keep the ON button pressed for 5 seconds to activate the linking mode.
7. There are two linking modes: EZ Mode (default mode) and AP Mode. In the EZ Mode the LED blinks rapidly (twice every second) and in the AP mode the LED blinks slowly (once every 2 seconds). You can switch from one mode to the other by pressing and holding the ON button for a few seconds.

**OPTION A: EZ Mode

**

1. A1. The LED indicator will blink rapidly. If the LED indicator doesn’t blink, press and hold the ON button for a few seconds until the LED indicator starts to blink.
2. A2. Press the red button on the app.
3. A3. Select the Wi-Fi network you want to use and enter the password. Make sure that your mobile device is connected to the same 2.4 GHz Wi-Fi network.
4. A4. Once the IR remote control has been added, give it a name* (for example, “IR remote control 1”). You may assign a name to each IR device connect-ed to the IR remote control in order to control them separately (for example “Jack’s TV”).
   Note: Keep in mind that the name that you assign to the IR remote control and the IR devices connected to it are the names you will use to control them through Google Assistant, Google Home, and Alexa.

OPTION B: AP Mode

1. B1. The LED will blink slowly. If the LED indicator doesn’t blink, press and hold the on button for a few seconds until the LED indicator starts to blink rapidly. That means that the IR remote control is in EZ linking mode. Press and hold the on button until the LED starts to blink slowly, in order to change to AP mode.
2. B2. Select AP Mode.
3. B3. Press the red button on the app.
4. B4. Select the Wi-Fi network you want to use and enter the password.
5. B5. Press the red button and select “SmartLife_XXXX”.
6. B6. Go back to the app.
7. B7. Once the IR remote control has been added, give it a name* (for example, “IR remote control 1”). You may assign a name to each IR device connected to the IR remote control in order to control them separately (for example “Jack’s TV”).
   NOTE: Keep in mind that the name that you assign to the IR remote control and the IR devices connected to it are the names you will use to control them through Google Assistant, Google Home, and Alexa.

Control the Smart IR Remote with the Smart Life or Tuya Smart app

Control panel

Device control panel

Add an IR device

1. Choose the type of device you want to add and follow the instructions of the app.
2. If the brand of the device you want to add doesn’t appear in the brands library, select the DIY option and follow the instructions of the app to copy the buttons manually.
   Note: Please note that some functionalities of the Smart IR Remote are not compatible with voice control through Google Assistant, Google Home and Alexa.

FAQs

1. What devices can be controlled using the Smart IR Remote?
   You can use the Smart IR Remote to control IR devices such as TVs, air conditioners, TV boxes, fans and any other IR enabled device that is compatible with the product specifications.

2. What should I do if outlet synchronization fails?

   • Make sure that you are using a Wi-Fi 2.4 GHz network.
   • Make sure the password is correct.
   • Make sure that the smart IR remote is connected to a power source as close as possible to the Wi-Fi router.
   • Check that the smart IR remote is in sync mode (the LED indicator should blink).
   • Restart the router.
   • Restart your cell phone.
     If synchronization fails again after checking these, restart the smart IR remote. Once it is connected to a power source, press and hold the on button for 5 seconds. The LED indicator will blink. Try to sync it again.

3. Which mobile networks can be used to control IR devices with the Smart IR Remote?
   To sync the Smart IR Remote, your mobile device must be connected to the same 2.4 GHz Wi-Fi as the IR remote control. Once the Smart IR Remote has been synchronized for the first time you can connect your mobile phone to the 5 GHz Wi-Fi network, and you will be able to control the IR devices remotely through 2G, 3G and 4G mobile networks.

4. What should I do if I can’t control the synchronized devices with the Smart IR Remote?

   • Make sure the Smart IR Remote network is working properly. Click any button on the remote control panel. If the LED indicator blinks, the IR remote network is working properly.
   • Make sure there isn’t any object blocking the way between the Smart IR Remote and the IR enabled devices.

Safety information

• Only use the IR control indoors
• To disconnect the flow of electricity, disconnect the IR control from the power source
• Disconnect the IR control from the power source before cleaning it
• Keep children away from the IR control
• Test the IR control in person before using it remotely
• Do not use the IR control with medical devices or vital support
• Do not use any liquids to clean the IR control
• Do not use the IR control in wet or humid areas
• Do not exceed the recommended electrical parameters
• Do not use the IR control with devices where imprecise measures of time may be dangerous
• Do not use the IR control with devices that require supervision to operate
• Do not use the IR control in an electrical socket controlled by a switch since the switch can be turned off
• Use the outlet at temperatures between 0° — 50Cº at most

Legal Note

Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.

The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• For more information, contact the retailer or the local authorities in charge of waste management.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>