ROBUS RAA8306550 Atlantic AC Strip Installation Guide

ROBUS RAA8306550 Atlantic AC Strip

PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.

Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior notification. For the latest technical information please visit our web site www.robus.com or robusdirect.com

-20°C < Ta < +45°C, 220-240V~50/60Hz, Class II, IP65 Luminaire is non-dimmable
Suitable for mounting on a normally flammable surface.

Installation

1. Ensure mains supply is switched off before commencing work.
2. Cut lengths are only provided through Robus Customised Conversions department.
3. Maximum continuous length 50m Mounting:
4. Using screws attach mounting bracket (RAAB ) onto the surface ( 4 x brackets for the first meter, then 3 x brackets every meter). Attach the LED strip onto the mounting kit and close clips. Avoid covering the LED chip as far as possible.
5. Make connections in suitable IP enclosure. Connect supply cables: L – Blown; N – Blue.
6. Please see installation diagrams and install the strip as per diagrams

ACCESSORIES

RAAB: ATLANTIC AC strip mounting bracket

Information for the Product user

1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with crossed out wheelie bin symbol).
2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is separated from normal household waste and recycled in the WEEE chain
4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be disposed of according to local WEEE regulations
   The Installation must be carried out by a qualified electrician

References

• robusdirect
• ROBUS: Home to Best-in-Class LED Lighting and Customisation - Robus

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>