AUKEY LT-T7R Touch Control RGB Lamp User Manual
- June 6, 2024
- Aukey
Table of Contents
AUKEY LT-T7R Touch Control RGB Lamp
Thank you for purchasing the AUKEY LT-T7R Touch Control RGB Lamp. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.
Package Contents
- Touch Control RGB Lamp
- Power Adapter
- User Manual
- Warranty Card
Specifications
| Model | LT-T7R |
|---|---|
| Luminous Flux | 200 lm |
| Color Temperature | 3000K (white light mode) |
| Color Rendering Index | ≥80Ra |
| Input | AC100–240V 50/60Hz |
| Power Consumption | 6W |
| LED Type | RGB light: SMD5050; white light: SMD2835 |
| Number of LEDs | RGB light: 4; white light: 24 |
| Materials | ABS, PP, silicone, aluminum alloy |
| Cable Length | 1.8m / 5.9ft |
| Dimensions | 218 x 100mm / 8.59” x 3.93” |
| Weight | 570g / 20.11oz |
Product Diagram
Getting Started
- Plug the power adapter into an AC outlet
- Connect the cable to the power input port in the bottom of the base
- Tap the top surface to turn lamp on/off
Adjusting Light Brightness
- Touch and hold on the top surface until you get the desired brightness. Each time you touch and hold on the top surface, the brightness will smoothly scale in the opposite direction
- Stop at any brightness level between the lowest and highest (LED indicator will flash when these are reached)
- Brightness is only adjustable in white light mode
- The default brightness level of white light mode is 50%
Switching Between Light Modes
There are three main light modes: white light, automatic color-cycling, and
manual color-cycling.
- Switch between light modes by pressing the multi-function button
Using the Light Color Modes
There are two RGB color-cycling light modes. The first is manual and the
second is automatic. Use manual to choose a color. Automatic cycles through
all the colors continuously.
- In manual, touch and hold on the top surface until you get the desired color
- The color modes don’t allow brightness adjustment
Night Light Mode
This is a white light with minimum brightness level.
- When the lamp is off, touch and hold on the top surface for 2 seconds to enter night light mode
- Tap to turn off the lamp, or touch and hold on the top surface again to switch to the main white light mode with brightness adjustment
- Night light mode doesn’t have lighting memory function and doesn’t allow customization
One-Hour Timer
- When the lamp is on (in any mode), press and hold the mode button for 2 seconds to turn on a one-hour timer and the indicator will flash 3 times
- Press and hold the button for 2 seconds again to turn off the timer and the indicator will flash once
Light Memory Function
The lamp switches on with the previous settings, so you don’t need to repeat
brightness or mode adjustment to reach your preferred setting.
Product Care & Use
- Don’t repair, dismantle, or modify the product
- Only use the supplied AC power adapter
- Keep away from liquids and extreme heat
- Switch off the lamp and unplug the power adapter before cleaning or when not in use for a long time
- Clean the lamp with a soft, dry cloth
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below
that corresponds with your region. Please include your Amazon order number and
product model number.
Amazon US orders: support.us@aukey.com
Amazon EU orders: support.eu@aukey.com
Amazon CA orders: support.ca@aukey.com
Amazon JP orders: support.jp@aukey.com
- Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.
Aukey Technology Co,.Ltd
www.aukey.com | support@aukey.com
Room 102, Building P09, South China City Electronic trading center, Longgang
District, Shenzhen, Guangdong, 518111, CN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>