ATRIX Elite Series 2.4G Wireless Headset User Guide
- June 6, 2024
- ATRIX
Table of Contents
2.4G Wireless Headset User Guide
Need Help?
Have any questions or comments? Need help getting set up? Contact us at
https://care.gamestopicom
What’s Included
- Elite Series Wireless Headset
- 4Ghz Dongle
- USB-C to USB-A Charging Cable
- 5mm Aux Cable
LED Indicators
- Headset Indicator Flashes Blue – Unpaired
- Headset Indicator Rapid Flashing Blue – Pairing
- The blue light will be constant – Paired
- Headset Indicator Solid Red – Charging
- Microphone LED Solid Red – Microphone Muted
Pairing the Headset
- Hold the power button on the headset for 3 seconds to turn it on and off.
- The headset will automatically pair with the included 2.4Ghz dongle when it is plugged into your console.
Charging the Headset
- Plug the USB-C end of the charging cable into the headset
- Plug the USB-A end of the charging cable into a UL-compliant power supply of at least DC 5V 350mA.
- A full charge requires approximately 4 hours.
- The red light will turn off when charging is complete.
PS5 Setup
- Plug the 2.4Ghz receiver into the USB port located on the front of your console and power on the headset.
- You can also use the included 3.5mm Aux cable to connect by plugging the headset into the controller
- Enter the settings menu > Devices > Audio Devices.
- Set input and output device to USB Headset
- Change “Audio Output to Headphones” to “Chat Audio”
- Set headphone volume level to your desired setting.
- Select the microphone level and follow the prompts to adjust your desired settings.
PS4 Setup
- Plug the 2.4Ghz receiver into the USB port located on the front of your console and power on the headset.
- You can also use the included 3.5mm Aux cable to connect by plugging the headset into the controller
- Enter the settings menu > Devices > Audio Devices.
- Set input and output device to USB Headset
- Change “Audio Output to Headphones” to “Chat Audio’:
- Set headphone volume level to your desired setting.
- Select the microphone level and follow the prompts to adjust your desired settings.
XBOX Series X/S Setup
- Use the AUX cable to plug the headset into the controller. Note: Not all controllers will have a 3.5mm audio jack.
- Enter the System Menu > Audio
- Set Headset Volume to your desired setting.
- Set Mic Monitoring to your desired setting.
XBOX One Setup
- Use the AUX cable to plug the headset into the controller. Note: Not all controllers will have a 3.5mm audio jack.
- Enter the System Menu > Audio
- Set Headset Volume to your desired setting.
- Set Mic Monitoring to your desired setting.
PC Setup
- Plug the 2.4Ghz receiver into an audio-enabled USB port on your PC and power on the headset.
- Set audio input and output to USB connected device.
- If you’re having problems make sure the USB device is selected for default communications in sound control settings.
Switch Setup
- Use the AUX cable to plug the headset into the switch.
- The switch must be used out of the dock in handheld mode to use the audio jack.
Adjusting The Mic
- The microphone is adjustable and can be extended or pushed back into the headset.
- To adjust the microphone pull it out of the ear cup, do not pull too hard to avoid damaging it.
7.1 Audio Setup
- For a 7.1 enhanced audio driver use the QR code or navigate to http://www.gemsfindyours.com/atrix-wireless-headset and download the zip file. Then follow the easy steps:
- Extract the zip file contents to a folder on your computer
- Plus your ea set into your P
- Run the ‘setup. excel’ and follow the prompts.
Important Safety Instructions
WARNING When using this product, basic precautions should always be followed,
including the followin: Read these instructions carefully. All cautions and
warnings soul be followed. Protect equipment from humidity. Do not use
chemical enter ents to clean your device, use a soft dry cloth. To avoid amae
from electrical aks only servicemen, it is not in use. If one of t e followin
situations arise, equipment is to be bedecked by qualified service personnel:
- Liquid has penetrated into the equipment.
- Equiment as been ex ose to umi ity.
- Equiment has been roe and/or is damaged.
- Equiment is the obvious sin of break.
- Equiment ones do not work well or you cannot get it working according to the user’s manual.
SAVE THESE INSTRUCTIONS
FCC ID for headset: 2A023-GSHP55 Model: GSHP55 Input: DC5V—300mA
FCC ID for Dongle: 2A023-GSHP55C Model: GSHP55C Made in China
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for help
Geeknet, Inc. 625 Westport Pkwy, Grapevine, TX 76051 Phone: 855-474-7717
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>