ATRIX GSKB06 Wireless Full Size RGB Mechanical Keyboard User Guide
- June 6, 2024
- ATRIX
Table of Contents
Wireless Full Size RGB Mechanical Keyboard
User Guide
What’s Included
- Wireless Full Size RGB Mechanical Keyboard with a 2.4Ghz Dongle
- USB-A to USB-C Power Cable
Need Help?
Have any questions or comments? Need help getting set up? Contact us at https://care.gamestop.com
Light Function Keys
- FN Key + INS – Cycle 15 preset keyboard light settings
- FN Key + HM – Cycle color modes inside light settings
- FN Key + ESC – Hold for 5 seconds to reset to factory settings
- FN Key + WIN-L – Lock/Unlock Windows Key
- FN Key + Up Arrow – Increase Brightness
- FN Key + Down Arrow – Decrease Brightness
- FN Key + Left Arrow – Decrease LED Speed
- FN Key + Right Arrow – Increase LED Speed
- FN Key + Backspace – Turn on/off backlight
Keyboard Multimedia Keys
- FN Key + F1 – My Computer
- FN Key + F3 – Calculator
- FN Key + F5 – Previous Track
- FN Key + F7 – Play/Pause
- FN Key + F9 – Mute
- FN Key + F11 – Volume +
- FN Key + F2 – Search
- FN Key + F4 – Media Player
- FN Key + F6 – Next Track
- FN Key + F8 – Stop
- FN Key + F10 – Volume –
- FN Key + F12 – Lock keyboard
Using the Keyboard Wired
- To use the keyboard wired plug the USB-A end of the cable into your computer.
- Hold FN + 5 for three seconds, the indicator light will turn
Pairing the Keyboard
2.4Ghz Wireless Pairing:
- Insert 2.4Ghz Dongle to your computer.
- Power ON the keyboard and press the pairing button.
- Hold the FN+4 key for 3 seconds to enter pairing mode. The indicator light will flash green when it is ready to pair.
- The keyboard is connected when the indicator light turns solid green.
Bluetooth Pairing:
- Power ON the keyboard and press the pairing button.
- You can pair the keyboard to three different devices. Hold FN+ 1, 2, or 3 key for 3 seconds to enter a pairing mode.
- The indicator light will flash red, pink, or blue respectively when it is ready to pair.
- Use the Bluetooth settings on your device to pair with “BT3.0 KB” or “BT5.0 KB” (depending on your device’s Bluetooth compatibility).
- The keyboard is connected when the indicator light turns solid red, pink, or blue.
- Once you are paired with a device it will automatically reconnect the next time you turn it on if it’s in range with the device and Bluetooth mode is switched on.
- If the light is rapidly flashing it is seeking the previous device to reconnect
Charging the Keyboard
- Plug the USB-C end of the charging cable into the keyboard
- Plug the USB-A end of the charging cable into your computer.
- A full charge requires approximately 4 hours.
- The charging light will turn solid green when charging is complete. Note: The keyboard still works when it is charging and the power switch is in the off mode.
FCC ID for Dongle: 2A023-KB6 Model: KB6 Made in China
FCC ID for Keyboard: 2A023-GSKB06 Model: GSKB06 Input: DC5V= 500mA
Important Safety Instructions
WARNING When using this product, basic precautions should always be followed, including the following: Read these instructions carefully. All cautions and warnings should be followed.
- Protect equipment from humidity.
- Do not use chemical detergents to clean your device, use a soft dry cloth.
- To avoid damage from electrical peaks unplug the device when it is not in use. If one of the following situations arise, the equipment has to be checked by qualified service personnel:
- Liquid has penetrated into the equipment.
- Equipment has been exposed to humidity.
- Equipment has been dropped and/or is damaged.
- Equipment has obvious signs of breakage.
- Equipment does not work well or you cannot get it working according to the user’s manual.
SAVE THESE INSTRUCTIONS
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
- Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
ATP! X Geeknet, Inc. 625 Westport Pkwy, Grapevine, TX 76051 Phone:
855-474-7717