ATRIX GSHP709 Cat Speaker User Guide
- June 6, 2024
- ATRIX
Table of Contents
ATRIX GSHP709 Cat Speaker User Guide
BLUETOOTH CAT SPEAKER INSTRUCTIONS
Material: 105gsm double side art paper( C2S).
Color: Black + pantone cool gray 8c
Surface coating : glossy varnish.
What’s Included
- Bluetooth Cat Speaker
- USB-A to Micro USB Charging Cable (Note: this cable does not transfer data)
LED Indicator
- Flashing Blue – Pairing/ Max/Min Volume
- Solid Blue – Paired with Play Back
- Solid Red – Charging
- No Red light – Charging Complete
Pairing the Speaker
- Pairing:
- Power ON the speaker.
- When pairing for the first time the speaker will automatically enter pairing mode. The indicator light will flash blue when it is ready to pair.
- Use the Bluetooth settings on your device to pair with ATRIX Cat Speaker.
- The speaker is connected when the indicator light continuously flashes blue. You will hear the confirmation sound.
- The speaker will automatically reconnect to the device it was most recently paired to when you turn the speaker on and it is in Bluetooth mode.
- Re-enter Pairing:
- To re-enter pairing mode disconnect from your device using the Bluetooth menu.
- Press and hold the “+” and the “-” button to manually disconnect with the current device.
Charging the Speaker
- Plug the Micro-USB end of the charging cable into the speaker. Plug the USB-A end of the charging cable into a UL compliant power supply of at least DC 5V 1A.
- A full charge requires approximately 3.5 hours.
- The red light will turn off when charging is complete.
TWS (True Wireless Stereo) Pairing
- You can pair two of this model of speaker together to get true stereo sound.
- Turn Bluetooth off on your device, place two matching speakers together, power them on.
- Press “+” and “2 buttons on two speakers together – they will pair automatically.
- On the device you would like to pair to, turn Bluetooth on, and pair to one of the speakers.
- When no music is being played the two speaker indicators will rapidly flash blue, you will hear the confirmation sound.
- To maintain TWS pairing turn Bluetooth off on your device before powering the speakers off, the speakers will pair automatically when next time power on. Then repair with your device.
FCC ID: 2A023-GSHP709 Model: GSHP709 Input: 5V=1.0A Made in China
Important Safety Instructions
WARNING When using this product, basic precautions should always be followed, including the following: Read these instructions carefully. All cautions and warnings should be followed. Protect equipment from humidity. Do not use chemical detergents to clean your device, use a soft dry cloth. To avoid damage from electrical peaks unplug the device when it is not in use. If one of the following situations arise, equipment has to be checked by qualified service personnel:
- Liquid has penetrated into the equipment.
- Equipment has been exposed to humidity.
- Equipment has been dropped and/or is damaged.
- Equipment has obvious sign of breakage.
- Equipment does not work well or you cannot get it working according to user’s manual.
SAVE THESE INSTRUCTIONS
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
ATRI X. Geeknet, Inc. 625 Westport Pkwy, Grapevine, TX 76051
Phone: 855-474-7717
Need Help
Have any questions or comments? Need help getting set up? Contact us at https://care.gamestop.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>