LEXON LL129 Fine Bag Light 2 Instructions
- June 6, 2024
- LEXON
Table of Contents
FINE BAG LIGHT 2
Design by Pauline Deltour
PRODUCT OVERVIEW
- Button
- LED light
- Leather cord
- Charging indicator
- Type-C charging port
CHARGING INSTRUCTIONS
We recommend you fully charge the battery before using
Fine Bag Light 2 for the first time.
- Plug the provided USB Type-C cable into the charging port of Fine Bag Light 2.
- Plug the USB end of the cable into any computer or any 5V power adaptor.
OPERATING INSTRUCTIONS
Mode 1: Press the button once to turn ON. Press again to turn OFF.
Mode 2: Press and hold the button to turn ON then release the button to turn
OFF.
SAFETY PRECAUTIONS
Read all the instructions before using the device:
- Attach and handle the bag LED light with care.
- Do not short-circuit your device.
- Do not attempt to disassemble the device by yourself.
- Do not use any inappropriate tools that can cause damage or malfunction to your device.
- Keep it far away from the flammable and explosive gas.
- Make sure the adaptor output is 5V when charging.
PRODUCT SPECIFICATIONS
- Material: ABS/Aluminium/Leather
- Dimensions: Ø2,2 x 9,6 cm
- Weight: 70 gr
- LED color: White
- Input: DC 5V
- Battery type: 18650 lithium battery
- Battery capacity: 2000 mAh
- Battery voltage: 3.7V
- Port type: USB Type-C
- Charging time: 4/5h
- Operating temperature: -10 – +55°C
- International warranty: 1 year
EUROPEAN UNION CE DIRECTIVE
LEXON hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of the directives 2014/30/EU &
2011/65/EU.
The original EU declaration of conformity may be found at: https://www.lexon-
design.com/assets/certifications-ce-finebaglight2.pdf
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national
legal system, the following applies: electrical and electronic devices may not
be disposed of with domestic waste. Consumers are obliged by law to return the
electrical and electronic devices at the end of their service lives to the
public collecting points set up for this purpose or point of sale. Details to
this are defined by the national law of the respective country. This symbol on
the product, the instruction manual or the package indicates that a product is
subject to these regulations. By recycling, reusing the materials or other
forms of utilizing old devices, you are making an important contribution to
protecting our environment.
USA – FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Notice: Any changes
or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/ TV technician for help.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-005.
All brands or product names are or may be trademarks or their respective
owners.
Pictures and specifications are not contractual. Assembled in China.
Nexon-design.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>