KSIX BXCQILAMP01 Lamp and Wireless Charger User Manual

KSIX BXCQILAMP01 Lamp and Wireless Charger

technical information

• Input parameters: DC 5V-2A, 9V-1.67A
• Wireless output power: 5W/7.5W-10W
• Charging efficiency: 70 %
• Charging range: 4 – 8 mm
• Size: 115 x 115 x 10 mm
• Weight: 134 g
• Micro USB – USB included
• Compatible with Qi wireless charging technology

1. ON/OFF button
2. LED indicator
3. Micro USB input
4. Flexible neck

Using the fast charge wireless charger

Charging a smartphone with fast wireless charging

1. Connect the wireless charger to a power source using the micro USB – USB cable. The LED indicator will turn on blue for 3 seconds, green for 15 seconds and then it will enter standby mode. If you wish to use fast charging power, plug the wireless charger into a power source with a Qualcomm QuickCharge 2.0 charger or higher (not provided with the product) or into a USB 2A charger or higher for iPhone.
2. To charge a device equipped with wireless charging technology*, place it in the center of the charger and this will start delivering energy automatically. During the charge, the LED indicator will flash blue. The battery icon on your mobile phone will show that it is charging.

If your device is not equipped with wireless charging technology, the LED indicator will blink blue and green quickly.

Note : Please keep in mind that the iPhone 8 and higher may overheat during charging. If your device becomes too hot, it is possible that the software limits battery charging to 80%. Restart charging with the iPhone and the charger located in a cooler place.

Using the lamp

The lamp has 2 light temperatures (warm and cold) and 2 light brightness levels (high and subdued). The ON/OFF button will allow you to turn the light ON/OFF, select the light temperature and set the light brightness level. Touch the ON/OFF button to select the following options:

1.  Turn light ON
2.  Warm light mode, with full brightness
3.  Cold light mode, with full brightness
4.  Subdued light mode
5.  Turn light OFF

Caution: Individuals with pacemakers should talk to a doctor before using this product. They must stay at least 50 cm away from the product because the electromagnetic waves may affect the pacemaker’s functioning.

Maintenance recommendations

• Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the first time:

• When you use device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
• If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot weather)
• Do not throw the product into fire.
• Keep the product away from children.
• Disconnect or switch off the product if you are not going to use for a long period of time.
• Do not use the device if you perceive any visible defects.
• Do not attempt to open or puncture the product. You might damage it.
• Do not use the product with incompatible devices.
• Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. For electronical devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.

• This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
• The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
• If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
• Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste management.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>