Pro 2 Bluetooth Gamepad Instruction Manual

Pro 2 Bluetooth Gamepad

Pro 2 Bluetooth gamepad

• press & hold start for 3 seconds to turn off the controller
• press start to turn on the controller

Switch

NFC scanning, IR camera, HD rumble, notification LED are not supported, nor can the system be waken up wirelessly

Bluetooth connection

1. turn the mode switch to S
2. press start to turn on the controller. LED starts to rotate from left to right
3. press pair button for 3 seconds to enter its pairing mode. LED stops blinking for a short moment then starts to rotate again (this is required for the very first time only)
4. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order
5. LED becomes solid when connection is successful

• controller will auto-reconnect to your Switch with the press of start once it has been paired

wired connection

1. turn the mode switch to S
2. press start to turn on the controller. LED starts to rotate from left.to right 3 -connect the controller to your Switch dock via its USB cable
3. wait till the controller is successfully recognized by your Switch to play

• Switch system needs to be 3.0.0 or above for wired connection. Go to System Setting> Controller and Sensors> turn on Pro Controller Wired Communication
• LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the controller supports

Windows CX – input) Bluetooth connection

• required system: Windows 10 (1703) or above. Bluetooth 4.0 is supported

1. turn the mode switch to X
2. press start to turn on the controller. LEDs1 & 2 start to blink
3. press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left.to right (this is required tor the very first time only)
4. go to your Windows Settings > Devices > Bluetooth&other devices > turn it on
5. choose Add Bluetooth or other device – Bluetooth
6. pair with [BBitDo Pro 2]
7. LED becomes solid when connection is successful

• controller will auto reconnect to your Windows device with the press of start once it has been paired

wired connection

1. turn the mode switch to X
2. press start to turn on the controller. LEDs1 & 2 start to blink
3. connect the controller to your Windows device via its USB cable
4. wait till the controller is successfully recognized by your Windows device to play

• LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the controller supports

Android CD – input)

• Android CD – input)

Bluetooth connection

1. turn the mode switch to D
2. press start to turn on the controller. LED 1 start to blink
3. press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left.to right (this is required for the very first time only)
4. go to your Android device’s Bluetooth setting, pair with [SBitDo Pro 2]
5. LED becomes solid when connection is successful

• controller will auto reconnect to your Android device with the press of start once it has been paired

wired connection

1. turn the mode switch to D
2. press start to turn on the controller. LED 1 starts to blink
3. connect the controller to your Android device via its USB cable
4. wait till the controller is successfully recognized by your Android device to play

• OTG support is required on your Android device

macOS

• required system: OS X Lion (10.7) or above

Bluetooth connection

1. turn the mode switch to A
2. press start to turn on the controller. LEDs1 & 2 & 3 starts to blink
3. press pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left.to right (this is required for the veryfirsttime only)
4. go to your macOS device’s Bluetooth setting and turn it on
5. pair with [Wireless Controller]
6. LED becomes solid when connection is successful

• controller will auto reconnect to your macOS device with the press of start once it has been paired

wired connection

1. turn the mode switch to A
2. press start to turn on the controller, LEDs 1, 2 & 3 start to blink
3. connect the controller to your macOS device via its USB cable
4. wait till the controller is successfully recognized by your macOS device to play

Turbo function

1. hold the button you would like to set turbo functionality to and then press the star button to activate its turbo functionality
2. home LED blinks continuously when the button with turbo functionality is pressed
3. hold the button with turbo functionality then press star to deactivate its turbo functionality

• D-padjoysticlcs, home, select and start buttons are not included
• This does not apply to Switch mode

battery

• 20 hours of playtime with a1000 mAh built-in battery pack
• rechargeable with 4 hours charging time
• replaceable with two AA batteries with 20 hours of play time
• controller will turn off in 1 minute with no connection and 15 minutes with Bluetooth connection but no use
• controller stays on with wired connection

Ultimate Software

• It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination
• please visit support.Sbitdo.com/ultimate-software.html for the application

support

• Uplease visit support.Sbitdo.com for further information & additional support

FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference causedby unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>