Canon C3226i ImageRUNNER Multifunctional Colour Printer User Guide
- June 6, 2024
- Canon
Table of Contents
C3226i ImageRUNNER Multifunctional Colour Printer
Getting Started
Quick Setup
NEXT PAGE
Quick Operation
P.5
Please read “Important Safety Instructions” before operating this product.
After you finish reading this guide, store it in a safe place for future
reference. The information in this document is subject to change without
notice.
User’s Guide/FAQ
Quick Setup
Configuring the Machine
How to use the search number
ABCD-123
4FBSDI
Configuring the Initial Settings of the Machine
When the power is turned ON for the first time after installing the machine
The “Setup Guide” screen is displayed automatically
CASE1
All users can make the following settings
If you want to use copy function first of all…
proceed to CASE1
If you want to use all functions of the machine…
proceed to CASE2
1. Language/Keyboard Layout Settings 2. Paper Size/Type Settings
Press
3. Gradation Adjustment 4. Report Printing
First Setup finished!
Now you can use a limited variety of functions including copying.
2
1. Display the online manual website for user’s guides https://oip.manual.canon/
2. Select the appropriate user’s guide [imageRUNNER] [Color] Select this machine
Quick Setup
3. To access information in the User’s Guide, use the search number
CASE2
Administrator privileges are required to make the following settings
1. Language/Keyboard Layout Settings 2. Paper Size/Type Settings
3. Logging In as an Administrator
The default PIN is ‘7654321’.
Only the Administrator is allowed to configure the following settings
4. User Authentication Settings 5. Date/Time Settings 6. Network Setting 7.
Fax Settings*
8. Gradation Adjustment 9. Report Printing
You can also configure the settings listed on the right half of this page, as
necessary.
Setting up the Network Environment
User’s Guide
IP:192.168.
PMW-STNW
4FBSDI
See this topic also when making connection via wireless LAN
Installing Drivers User’s Guide
PMW-INDR
4FBSDI
Setting E-mail/I-Fax Communication
User’s Guide
PMW-STCM
4FBSDI
Setup finished!
Now you can use all functions including printing and sending faxes from a
computer.
- Only for the machine with fax board
For more information about the “Setup Guide”
User’s Guide
PMW-STSG
4FBSDI
3
Memo
4
Quick Operation
5
Quick Operation
Place the Original Document Properly
Remember before You Start Operation
Place your original on the platen glass
Place to fit inside the corner.
Place the document with the scan side face down.
Place your originals into the feeder*
- This operation is available only on models that have a feeder attached.
Adjust the slide guides.
Place the document with the scan side face up.
Suitable for scanning book pages, magazine pages and newspaper clips.
Suitable for continuously scanning many pages of literature, quotation, etc.
Start the Operation from the Operation Panel
Machine
Operation Panel Touch panel display
[Energy Saver] key [Home] key [Stop] key
6
Copying
1. Place the original document. 2. Select
Useful copy settings
N on 1 2-Sided or 1-Sided Enlarging or reducing
Quick Operation
Copying User’s Guide
PMW-CPIG
4FBSDI
Printing
1. Open the document to print, and select the print function of the
application.
2. Select the printer driver for the machine, and select [Preferences] or
[Properties].
3. Specify the paper size. 4. Specify the paper source and paper type. 5.
Specify the print settings, as necessary. 6. Select [OK]. 7. Select [Print] or
[OK].
Useful print settings
2-sided N on 1 Booklet Printing
Printing User’s Guide
PMW-PTIG
4FBSDI
7
Quick Operation
Faxing*
1. Place the original document. 2. Select
Useful fax functions
Sequential Broadcast Memory Reception PC Fax
- This function is available only if the FAX Board is installed.
Faxing User’s Guide
PMW-FXIG
4FBSDI
Scanning
1. Place the original document. 2. Select
Types of scan
Store in USB memory device Send e-mail Send to file server
To scan from a computer
Use the scanner driver supplied with the machine
Scanning User’s Guide
PMW-SCIG
4FBSDI
8
Loading Paper
Loading in the Paper Drawer
In the following, the operations that are common to paper drawers 1 and 2 are
described by taking drawer 2 as example.
1
2 Slide the light blue knobs to adjust the positions of the paper guides.
Align the protrusion to the appropriate paper size marking.
3 First fan the paper stack well and then load it. Make sure that this line is
not exceeded.
Paper Envelope
Quick Operation
Specifying Paper Size and Type in the Paper Drawer
User’s Guide
PMW-SPDR
4FBSDI
4 Place the paper drawer back into the machine.
CAUTION! Be careful not to get your fingers caught between the paper drawer
and the machine.
NOTE If you have changed the paper size, replace the label with one
corresponding to the paper size as necessary.
If you have changed the paper type, be sure to change the paper settings.
5 Select <Settings/Regist. Shortcut> on the Home screen.
6 Select
7 Specify the size and type of paper, according to the screen.
The print side face up
9
Quick Operation
Loading Paper
Loading in the Multi-Purpose Tray
CAUTION! When using coated paper or paper that does not feed well, load one
sheet at a time.
1
2 Adjust the paper guides so that they are slightly wider than the paper to be
loaded.
Tray extension NOTE Pull out the tray extension when loading large-sized
paper.
3 Fan the paper stack well, align the edges on a flat surface, and then load
it. Make sure that this line is not exceeded.
Specifying Paper Size and Type in the Multi-purpose Tray
User’s Guide
PMW-SPMT
4FBSDI
4 Adjust the paper guides to match the size of the loaded paper.
Align the paper guides to the paper size markings.
5 Check the paper size and type, and press
6 Press
The print side face down
10
If a Problem Has Occurred
Quick Operation
Maintenance User’s Guide
PMW-MNTC
4FBSDI
The Machine Does Not Seem to Work
Check the following.
· Is the power turned ON? · Is the machine out of sleep mode?
If both the display and are not lit, press the power switch.
Paper Jams Have Occurred
When paper is jammed, a screen, as shown below appears. Clear the paper jams,
according to the on-screen instructions.
Power switch · Is the power cord connected correctly?
If the problem persists, see the User’s Guide.
Replacing Consumables
Toner Cartridge
Canon genuine toner cartridge · Canon NPG-67 Toner Black · Canon NPG-67 Toner
Cyan · Canon NPG-67 Toner Magenta · Canon NPG-67 Toner Yellow · Canon NPG-67L
Toner Cyan · Canon NPG-67L Toner Magenta · Canon NPG-67L Toner Yellow Not
available in some regions. Staple
Staple-P1 This can be used with the following options. · Inner Finisher-L
11
Quick Operation
If a Problem Has Occurred
Printing Results Are Not Satisfactory
Images Are Shifted/Slanted Solution
Adjust the paper guides.
Adjust the guide exactly. Multi-purpose tray
Irregularities Appear in Images/Images Are Faint
Solution 1
The paper may have absorbed moisture. Replace it with paper that has not
absorbed moisture.
Solution 2
Perform gradation adjustment.
1. Press .
2. Press <Adjustment/Maintenance>
Follow the instructions on the screen to perform gradation adjustment. For more information, see the User’s Guide.
Adjusting gradation User’s Guide PMW-AJGR
4FBSDI
12
Maintenance User’s Guide
PMW-MNTC
4FBSDI
Quick Operation
Troubleshooting User’s Guide
PMW-TROB
4FBSDI
Black Streaks Appear in Images*
- Only for the model with a feeder attached.
Solution
Clean the document feed scanning areas.
1. Open the feeder, and clean the lower side document feed scanning area using the supplied glass-cleaning sheet.
NOTE Do not use glass cleaner or an alcohol solution, etc., as they will strip away the stain-proof coating.
2. Open the front cover. 3. Take out the cleaning stick.
2. Close the feeder.
NOTE If black streaks still appear after dirt removal, perform the following
procedure to execute
White Streaks/Color Streaks Appear in Images
Solution
Cleaning the dust-proof glass.
1. Turn the power OFF, and remove the power plug from the power outlet.
Slide the stick to the right to take it out.
13
Quick Operation
If a Problem Has Occurred
4. Insert the cleaning stick into the hole with the pad on its tip facing down.
Bleed-through Occurs
Solution 1
Set the type of original properly. If bleed-through is observed in the copy
result, a button on the Home screen may be able to help you reduce the bleed-
through.
1. Press <Copy (Prevent Bleed-Thru)> on the Home screen.
Pad
5. Insert the cleaning stick in until it hits the bottom of the hole, and
gently move it back and forth.
CAUTION! Insert the cleaning stick into all four holes to clean them.
6. Put the cleaning stick back in the original location, and close the front
cover.
7. Insert the power plug into the power outlet, and turn the power ON.
2. Press
Solution 2
Set a lower background density. 1. Select the function on the Home screen. 2.
Press
Example: Fax
3. Press
4. Press 5. Press
14
Important Safety Instructions
This chapter provides important safety instructions for the prevention of
injury to users of this machine and others, and damage to property. Read this
chapter before using the machine and follow the instructions to ensure that
you use the machine properly. The Canon online manual site
(https://oip.manual.canon/) also provides information on this machine. Read
this information also to ensure correct use. Do not perform any operations not
described in this manual. Canon will not be responsible for any damages
resulting from operations not described in this manual, improper use, or
repairs or modifications not performed by Canon or a third party authorized by
Canon.
WARNING Indicates a warning concerning operations that may lead to death or
serious personal injury if not performed correctly. To ensure that you use the
machine safely, always observe these warnings.
CAUTION Indicates a precaution for preventing the risk of personal injury or
property damage other than a product fault due to improper use of the machine.
To ensure that you use the machine safely, always observe these cautions.
IMPORTANT Indicates important operational requirements and restrictions that
should always be observed when using this machine. Always observe these
important items to avoid malfunctions, faults or property damage due to
improper machine operation.
Safety-related Symbols The following symbols are used on this product:
Power switch (On)
Power switch (Off)
Power switch (Stand-by)
Push-button switch (On /Off )
Protective earthing terminal
Electric shock warning: Hazardous voltage inside. Do not remove the cover.
High temperature warning. Do not touch.
Class II equipment
Contains moving parts. Keep hands and other body parts away from moving parts.
Electric shock warning: Unplug all power cords from the power outlet.
Sharp edges. Keep hands and other body parts away from sharp edges.
[NOTE] Some models may use other symbols not listed here.
Installation To ensure that you use this machine safely, read the following
precautions carefully before installing the machine in a suitable location.
WARNING Do not install in the locations listed below Doing so may result in a
fire or electric shock.
· Locations that risk blocking the ventilation slots (too close to walls or
curtains or on materials such as deep-pile carpets)
· Damp or dusty locations · Near heating appliances or open flames · Near
alcohol, paint thinners or other
flammable substances
Do not use a wireless LAN close to medical
equipment (only for products with a wireless
LAN function) Radio waves can interfere with medical equipment and cause
malfunctions that may lead to accidents.
CAUTION
Do not install in the locations listed below Doing so could result in a fault
or adversely affect people or other equipment.
· Outdoors or in locations exposed to direct sunlight
· Locations subject to temperature and humidity extremes, whether low or high
· Locations subject to dramatic changes in temperature or humidity
· Near equipment that generates magnetic or electromagnetic waves
· Near electronic devices or precision equipment, such as TVs, radios and
computers
· Laboratories or other locations where chemical reactions occur
· Locations heavily exposed to aerosol sprays, ammonia or other corrosive
gases
· Locations subject to instability or vibration · Surfaces that may warp under
the weight of
the machine or into which the machine is liable to sink (carpets, straw
matting, beds, etc.) · Locations where air ventilated from the machine
directly impacts people
Provide adequate ventilation during use This machine generates small amounts
of ozone and other emissions during normal use. These amounts are too low to
be harmful to humans. However, poorly ventilated rooms should be adequately
ventilated during extended use or long print runs.
Do not remove the leveling feet after
installation (only for products with leveling feet) Doing so may cause the
machine to move or tip over, resulting in injury.
IMPORTANT
When using a wireless LAN (only for products
with a wireless LAN function) · Install the machine no more than 50 meters
from the wireless LAN router. · As much as possible, install in a location
where communication is not blocked by intervening objects. The signal may be
degraded when passing through walls or floors. · Install the machine as far as
possible from digital cordless phones, microwave ovens or other equipment that
emits radio waves.
Connecting the telephone line (only for
machines that support faxes) In certain circumstances, this machine may not be
able to communicate via some telephone lines or in some regions. One such
example is when the total resistance of the telephone line and the machine
exceeds 1700. In this event, contact your dealer or service representative.
· This machine conforms to an analog telephone line standard and can only be
connected to ordinary subscriber telephone lines. Connecting the machine to a
business line or other dedicated line may result in faults. Always check the
line before
connecting.
· This machine includes a built-in paper drawer heater. Installing the machine
without optional products installed on surfaces with low resistance to heat,
such as a plastic desk mat, may result in heat-induced degradation of the desk
mat.
Power Supply
WARNING
Using the power plug and cord correctly Improper use may result in a fire or
electric shock.
· Check that the power supply used for the machine is safe and has a stable
voltage.
· Use only a power supply that meets the specified voltage requirements.
· Connect the machine to a securely grounded power outlet using the power cord
provided.
· Do not use power cords other than the cord provided.
· The power cord provided should only be used with this machine.
· If you plug this machine into a power outlet with multiple sockets, do not
use the remaining sockets to connect other devices.
· Do not use extension cords. · Run the power cord so as to avoid any risk of
tripping over the cord. · Do not modify, pull, unduly bend or
otherwise damage the power cord. · Do not place heavy objects on the power
cord. · Do not bundle the power cord or tie it in a
knot. · Do not run the power cord close to a heating
appliance. · Do not plug in and unplug the power
connector frequently. · Do not subject the power connector to
strong impacts. · Plug the power plug fully into the power
outlet, ensuring that it is securely inserted. · Do not touch the machine
during a
thunderstorm. · Do not plug in or unplug the power plug
with wet hands. · During holidays or other times when the
machine will not be used for long periods, turn the machine off and unplug it
from the power supply.
IMPORTANT
· Install this machine near the power outlet and leave sufficient space around
the power plug so that it can be quickly unplugged in an emergency.
· Always ensure that the power plug is unplugged from the power outlet before
starting work.
· Do not connect the power cord to an uninterruptible power supply. Doing so
may result in a malfunction or fault if a power failure occurs.
· Do not connect the power cord to the auxiliary power outlet on a computer.
· We recommend using a power outlet wired via a household earth-leakage
circuit breaker.
· Electrical noise may cause this machine to malfunction or lose data.
· When reconnecting the power cord after disconnecting it, wait at least 5
seconds before reconnection.
· A voltage drop that exceeds the permitted range may result in a malfunction
or loss of data in the machine and any connected computers.
· For information on your power supply,
15
contact your power supplier or your local electrical appliances store.
Handling
WARNING
Observe the following Improper handling may lead to a fire, electric shock or
burns.
· If the machine makes an unusual noise, emits an unusual smell, emits smoke
or excessive heat, or if any parts are damaged, immediately unplug the machine
from the power outlet and contact your dealer or service representative.
· Do not disassemble or modify this machine. · Place the machine such that the
power cord
and other cables and the gears and electrical parts inside the machine are
well out of the reach of children. · Do not place jewelry or other metal
objects or containers filled with liquid on the machine. · Do not use
flammable sprays near this machine. · When moving this machine, always turn
the machine off at the power switch, unplug the machine from the power outlet
and then disconnect the power cord and interface cables. · When connecting or
disconnecting a USB cable while the machine is still plugged into a power
outlet, do not touch the metal part of the connector. · Do not connect
unapproved products to ports on this machine (power outlet, connector ports,
etc.).
Cleaning and maintaining this machine Improper cleaning may result in machine
malfunctions, fire, electric shock or static electricity.
· You should clean this machine regularly. · Before cleaning, always turn the
machine off
and unplug it from the power outlet. · Unplug the power plug periodically and
wipe
the machine with a dry cloth to remove dust and grime. · Clean the machine
using a cloth moistened with water and then thoroughly wrung out. Do not use
alcohol, benzene, paint thinners or other flammable substances and do not use
tissue paper or paper towels. · Regularly check the machine for overheating,
rusting, dents, scratches and cracks.
Users of cardiac pacemakers This machine and its toner cartridges emit low
levels of magnetism and ultrasonic waves. If you use a cardiac pacemaker and
experience any abnormalities, move away from the machine and consult your
physician.
CAUTION
Take care not to drop heavy objects, on the
platen glass Doing so may damage the platen glass and result in injury.
Observe the following Failure to do so may result in injury, faults or paper
jams.
· Do not place heavy objects on this machine. · Take care not to trap your
hands when using
parts that open and close. · To avoid your hands or fingers being trapped,
do not touch the paper eject rollers. · Take care to avoid paper cuts when
replenishing the paper or clearing paper jams. · Do not subject the machine to
strong impacts or shaking.
· Do not use undue force when opening and closing doors, covers or drawers,
etc. on the machine.
· Do not turn this machine off while it is printing.
· Do not open and close any covers, or remove or add paper while the machine
is running.
· Do not force your fingers inside the machine. Contact Canon when moving the
machine To move the machine, always contact your dealer or service
representative beforehand. Do not attempt to move the machine yourself. Using
the feeders or platen cover correctly Improper use may result in injury.
· When making copies of items such as thick books on the platen glass, do not
press down hard enough to damage the feeder or platen cover.
· Close the feeder or platen cover slowly. · Do not slide your hand or fingers
fully into the
feeder or platen cover.
Do not put your hand into the machine while the paper drawers are removed
(only for machines with paper drawers installed) Doing so may result in
injury. Do not touch high-temperature or highvoltage components Doing so may
result in burns or other injury.
· Do not touch parts of the machine other than those specified in the manual.
· Immediately after use, the inside of the machine and the paper eject slots
are hot and should not be touched.
· Printed paper may become hot during continuous printing and should be
handled with care.
Cassette Heater (only for products with a cassette heater) When inspecting the
inside of the machine with the paper drawer removed, take care not to directly
touch the area surrounding the heater. Alternatively, turn off the power to
the machine and wait until it has fully cooled down before inspecting it.
Inspecting the machine while still hot may result in burns, including
lowtemperature burns.
Standard/regulation
Product name In some sales regions, this product may be registered under the
names in parentheses ( ) below in accordance with local safety regulations.
imageRUNNER C3226i/C3226 (F810400)
Wireless LAN Regulatory Information imageRUNNER C3226i/C3226 includes approved
Wireless LAN Module (Model name: K30365).
Regulatory information for users in Singapore
Complies with IMDA Standards
DB00671
EMC requirements of EC Directives This equipment conforms with the essential
EMC requirements of the relevant EC Directives. We hereby declare that this
product conforms with the EMC requirements of the EC Directives at a nominal
mains input 230 V at 50 Hz, although the rated input of the product is 220 to
240 V at 50/60 Hz. Shielded cables must be used to comply with the technical
EMC requirements of the EC Directives.
E-Waste Rules
India only This product is not to be disposed of with your household waste,
according to the E-Waste (Management) Rules, 2016. This product should be
handed over to a designated collection point, e.g., to an authorized
collection site for recycling waste electrical and electronic equipment (EEE).
Improper handling of this type of waste could have a possible negative impact
on the environment and human health due to potentially hazardous substances
that are generally associated with EEE. At the same time, your cooperation in
the correct disposal of this product will contribute to the effective usage of
natural resources. For more information regarding return and recycling of WEEE
products, please visit https://in.canon/en/ consumer/web/e-waste or write to
us at cipl. ewaste@canon.co.in.
Also, this product complies with the “E-Waste (Management) Rules, 2016” and
prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0.1 % by weight
and 0.01 % by weight for Cadmium, except for the exemptions set in Schedule II
of the Rule.
16
WARNING
Observe the following laser-related precautions Any direct eye exposure to
stray laser beams escaping the machine may be harmful to the eyes.
· Never open covers other than those indicated in the instructions in the
manual for this machine.
· Never use controls, adjustments or operation procedures other than those
stipulated in the manual as doing so could result in exposure to hazardous
radiation.
IMPORTANT This product is confirmed as a Class 1 laser product as defined in
IEC60825-1:2014 and EN60825-1:2014. CLASS 1 LASER PRODUCT LASER KLASSE 1
APPAREIL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1 PRODUCTO LÁSER DE
CLASE 1 APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1
Laser beams can be harmful to humans. This machine is fitted with covers and
an outer casing that blocks laser beams, so there is no risk of laser beams
escaping the machine during normal use.
Laser Safety Caution
Appendix
Legal Limitations on the Usage of Your Product and the Use of Images Using
your product to scan, print or otherwise reproduce certain documents, and the
use of such images as scanned, printed or otherwise reproduced by your
product, may be prohibited by law and may result in criminal and/or civil
liability. A non-exhaustive list of these documents is set forth below. This
list is intended to be a guide only. If you are uncertain about the legality
of using your product to scan, print or otherwise reproduce any particular
document, and/or of the use of the images scanned, printed or otherwise
reproduced, you should consult your legal advisor for guidance beforehand.
· Paper Money · Travelers Checks · Money Orders · Food Stamps · Certificates
of Deposit · Passports · Postage Stamps (canceled or uncanceled)
· Immigration Papers · Identifying Badges or Insignias · Internal Revenue
Stamps (canceled or
uncanceled) · Selective Service or Draft Papers · Bonds or Other Certificates
of Indebtedness · Checks or Drafts Issued by Governmental
Agencies · Stock Certificates · Motor Vehicle Licenses and Certificates of
Title · Copyrighted Works/Works of Art without
Permission of Copyright Owner
Consumables
WARNING
Observe the following precautions when handling consumables Improper handling
may lead to burns or a fire.
· Do not throw toner cartridges, or waste toner containers into an open flame.
· Do not store toner cartridges, waste toner containers, or paper in locations
exposed to an open flame.
· If you accidentally spill or scatter toner, carefully sweep up the toner
particles or wipe them up with a damp cloth in a way that prevents inhalation.
Do not use an ordinary vacuum cleaner to clean up spilled toner. Only models
with safeguards against dust explosions should be used.
CAUTION
Observe the following precautions when handling consumables Improper handling
may result in burns or be harmful to your health. If any toner is ingested or
gets into your eyes or mouth, consult a physician immediately.
· Keep toner and other consumables out of the reach of small children.
· Do not disassemble toner cartridges or other consumables.
· If toner leaks from a toner cartridge, take care not to ingest the toner or
allow it to directly touch your skin. If you get toner on your skin, wash it
off with soap and cold water. If any irritation persists after washing,
consult a physician immediately.
· When removing the waste toner container, take care not to drop it.
IMPORTANT
· When performing tasks such as removing jammed paper or replacing toner or
other consumables, take care not to get any toner on your hands or clothing.
· If toner gets on your clothing or hands, immediately wash the affected area
with cold water. Washing with hot water may fix the toner and result in
permanent staining.
About This Manual
Illustrations Unless otherwise stated, the illustrations used in this manual
are for the imageRUNNER C3226i with the following optional equipment attached:
· DADF-BA · Inner 2way Tray-M · Cassette Feeding Unit-AW
Screens Unless otherwise stated, the screens used in this manual are for the
imageRUNNER C3226i with the following optional equipment attached:
· DADF-BA · Inner 2way Tray-M · Cassette Feeding Unit-AW · Super G3 FAX Board
Note that some functions may not be available depending on the combination of
options used. Unavailable functions are not shown on the screen.
Trademarks macOS is a trademark of Apple Inc. QR Code is a trademark of DENSO
WAVE INCORPORATED. All brand names and product names appearing on this manual
are registered trademarks or trademarks of their respective owners. All other
trademarks are the property of their respective owners.
Disclaimers · The information in this document is subject to change without
notice. · CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MANUAL,
EITHER EXPRESS OR IMPLIED, EXCEPT AS STIPULATED HEREIN, INCLUDING WITHOUT
LIMITATION THEREOF WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OF USE, OR NONINFRINGEMENT OF PATENT RIGHTS. CANON
INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE, NOR FOR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS
MANUAL.
Copyright Unauthorized reproduction of the contents of this document in whole
or in part is prohibited.
Third Party Software This Canon product (the “PRODUCT”) includes third-party
software modules. Use and distribution of these software modules, including
any updates of such software modules (collectively, the “SOFTWARE”) are
subject to license conditions (1) through (9) below. (1) You agree that you
will comply with any
applicable export control laws, restrictions or regulations of the countries
involved in the event that this PRODUCT including the SOFTWARE is shipped,
transferred or exported into any country. (2) Rights holders of the SOFTWARE
retain in all respects the title, ownership and intellectual property rights
in and to the SOFTWARE. Except as expressly provided herein, no license or
right, expressed or implied, is hereby conveyed or granted by rights holders
of the SOFTWARE to you for any intellectual property of rights holders of the
SOFTWARE.
17
(3) You may use the SOFTWARE solely for use with the PRODUCT.
(4) You may not assign, sublicense, market, distribute, or transfer the
SOFTWARE to any third party without prior written consent of rights holders of
the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the SOFTWARE only when (a)
you assign all of your rights to the PRODUCT and all rights and obligations
under the license conditions to transferee and (b) such transferee agrees to
be bound by all these conditions.
(6) You may not decompile, reverse engineer, disassemble or otherwise reduce
the code of the SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the SOFTWARE or
create derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make separate copies of the SOFTWARE
from the PRODUCT.
(9) The human-readable portion (the source code) of the SOFTWARE is not
licensed to you.
Notwithstanding (1) through (9) above, the PRODUCT includes third-party
software modules accompanying the other license conditions, and these software
modules are subject to the other license conditions. Please check Platform
Version of the PRODUCT and refer to the other license conditions of third-
party software modules described in Appendix of Manual for the corresponding
Platform Version. This Manual is available at https://oip.manual.canon/. By
using the PRODUCT, you shall be deemed to have agreed to all applicable
license conditions. If you do not agree to these license conditions, please
contact your service representative.
V_201211
18
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A.
CANON CANADA INC. 8000 Mississauga Road Brampton ON L6Y 5Z7, Canada
CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands (See
http://www.canon-europe.com/ for details on your regional dealer)
CANON AUSTRALIA PTY LTD Building A, The Park Estate, 5 Talavera Road,
Macquarie Park, NSW 2113, Australia
CANON SINGAPORE PTE LTD 1 Fusionopolis Place, #15-10, Galaxis, Singapore
138522
FT6-2741 (000)
XXXXXXXXXX
Copyright CANON INC. 2021
PRINTED IN THAILAND