Canon PV-223 Mini Photo Printer for Smartphones User Guide
- October 30, 2023
- Canon
Table of Contents
Canon PV-223 Mini Photo Printer for Smartphones
Product Information
The PV-223 is a portable device that comes with a Regulatory Model Identification Number (RMN) of PP1003B for regulatory identification purposes. The device complies with Part 15 of the FCC Rules and operates under the following conditions:
- The device may not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. The device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The device comes with a 1-year limited warranty.
Product Usage Instructions
To use the PV-223 device:
- Ensure that the device is installed and used in accordance with the instructions provided in the manual to prevent harmful interference to radio communications.
- Keep the device as far as possible from the user’s body to reduce RF exposure. If available, set the device to lower output power to achieve further RF exposure reduction.
- Do not co-locate or operate the transmitter in conjunction with any other antenna or transmitter.
- Visit www.usa.canon.com/support (For USA Customer) www.canon.ca/support (For Canada Customer) for full terms and conditions of the 1-year limited warranty.
For portable device usage, the device complies with Industry Canada’s licence- exempt RSSs. It may not cause interference and must accept any interference, including interference that may cause undesired operation of the device.
RMN : PP1003B
Regulatory Model Identification Number is assigned for regulatory
identification purpose.
BATTERY CAUTION
-
It is recommended that you fully charge the battery after use. For healthy battery maintenance, you must fully charge the battery at least once a year before storing product.
If the product is not charged/used for an extended period of time, you may not be able to charge the built-in battery and the product may no longer power on. -
Disassembling the device may cause the battery leakage, explosion, damage or personal injury.
-
It is recommended that you fully charge the battery after use. For healthy battery maintenance, you must fully charge the battery at least once a year before storing product.
If the product is not charged/used for an extended period of time, you may not be able to charge the built-in battery and the product may no longer power on. -
Disassembling the device may cause the battery leakage, explosion, damage or personal injury.
FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Statement to the User
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
WARRANTY : 1 year limited warranty. For full terms and conditions, visit
www.usa.canon.com/support (For USA
Customer)
www.canon.ca/support (For Canada Customer)
Canada Compliance
RF Radiation Exposure Statement
“This device complies with Industry Canada’s licence exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.”
FOR PORTABLE DEVICE USAGE ( <20cm from body/SAR needed)
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
PMN : Mini Photo Printer
SPECIFICATIONS
- Power Source: Internal rechargeable battery
- 500 mAh Li-Polymer 7.4 V
- Connectivity: Bluetooth 5.0
- Operating Temperature : 41º to 104ºF / 5º to 40ºC
- Operating Humidity: <70%RH
- Recommended Operating and Charging Temperature:
- 59º to 90ºF (15º to 32ºC)
- Recommended Operating Humidity: 40-55%RH
- Dimension: 4-23/32″(W) x 3-5/16″ (H) x 27/32″ (D) /
- 120 mm (W) x 84 mm (H) x 21.5 mm (D) Weight: 6 oz (177 g)
- Automatic Power-off: 3 minutes / 5 minutes / 10 minutes (selectable In-App)
NOTE:
All specifications are subject to change without notice.
The IVY Mini Photo Printer is designed to be charged with a USB Charging Adaptor. If it is charged using a laptop USB port, there may not be sufficient electrical power to charge the IVY Mini Photo Printer.
Opening cover notice
Before removing and reinstalling the cover, read the operation manual
carefully and strictly follow the installation instructions to avoid operating
errors.
U.S.A and Canada only
The lithium ion/polymer battery is recyclable. Please call 1-800-8-BATTERY for
information on how to recycle this battery.
CANON ELECTRONIC BUSINESS MACHINES (H.K.) CO., LTD.
17/F., Tower One, Ever Gain Plaza,
82-100 Container Port Road, Kwai Chung,
New Territories, Hong Kong
Made in Taiwan
E-PO-1400
© CANON ELECTRONIC BUSINESS MACHINES (H.K.) CO., LTD. 2022
References
- Consumer Product Support - Canon Europe
- Canon Canada Customer Support Home Page
- Canon Support for | Canon U.S.A., Inc.