KODAK RODMP20AMZB Step Wireless Mobile Photo Mini Printer User Guide

KODAK RODMP20AMZB Step Wireless Mobile Photo Mini Printer

Contents

• Printer
• USB cable
• Starter pack of KODAK ZINK Photo Paper
• Quick Start Guide

Download the KODAK STEP Prints App
Scan the QR code,

Pair iOS and Android” Devices Via Bluetooth•

1. Press and hold the power button for 4-5 seconds.
2. Make sure your mobile device is in the Bluetooth” mode
3. Tap “KODAK STEP” when it appears.

Safety Precautions

• Do not attempt to disassemble this device for any reason.
• Never leave your printer or the ZINK® paper in an area that might become extremely hot or where it will be exposed to direct sunlight for a long time. This can cause your printer to overheat or suffer other problems.
• Don’t get it wet! If you need to clean your printer, use a soft cloth that’s been slightly dampened with water or rubbing alcohol, and gently wipe away any dirty spots. Don’t submerge the whole thing in water, ever.
• Be careful with your printer. Try not to drop it or shake it violently. The inside of the printer has a lot of very small parts that could break if they are Jostled around too much.
• Do not use products such as alcohol, gasoline, diluent, or any other organic solvent when cleaning or attempting to clean this product.
• Do not use this device in an environment where it will be exposed to heavy dust or humidity/moisture.
• Do not use this printer while bathing or in a shower.
• Do not place or charge the printer where it can fall or be pulled into a tub or sink.
• Do not place, drop, or submerge the printer in water or any other liquid.
• If the printer somehow falls into water despite you taking all of the above precautions, please do not reach into the water to retrieve it, especially if it is charging. If it is charging, unplug it immediately and then retrieve it.
• Take care that objects do not fall and liquids are not spilled onto the printer .
• This printer absolutely will not work without downloading the Android or iOS application. If you do not have an Android phone or an iPhone, unfortunately, this printer will not work for you.

Customer Service

U,S, Support,
kodak@camarketing.com
844·516-1539

International Support:
kodakintl@camarketing.com
844-516-1540
View one-year limited warranty details at: https://www.kodakphotoplus.com/pages/

kodak-step-instant-mobile-photo-printer-support
kodakphotoplus.com
The Kodak trademark, k:go, and trade dress are used under license from Eastman Kodak Company.
ZINK ZERO INK and the ZINK logo are trademarks of ZINK Holdings, LLC
iPad, iPhone,_iPod and iPod touch are trademarks of Ai:Pe Inc., registered in the U.S. and other countries

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

The device has been evaluated to met general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

French Example Canadian Compliance Statements
.”Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>