UMIDIGI BGSP Smartphone User Guide
- June 5, 2024
- Umidigi
Table of Contents
BISON
Thanks for choosing UMIDIGI products.
Android”10www.umidigi.com
Thanks
Building a great phone is hard enough, so building a great phone on a budget
should be infinitely more difficult. Big thanks to all who made this
superphone super awesome by contributing valuable time and developing
hardware, software & other developments. Thanks for choosing UMIDIGI products,
thanks to your support our value can be realized and we can constantly move
forward to create smart devices with better user experience.
www.umidigi.com
Scan the following QR-codes to follow us and enter the giveaway to win a UMIDIGI smart device for free!
| | | |
---|---|---|---|---
https://vk.com/umidigi| https://twitter.com/umidigi|
http://youtube.com/umidigi/|
https://www.facebook.com/Umidigi| https://www.instagram.com/umidigi
VK: vk.com/umidigi
YouTube: youtube.com/umidigi
Facebook: facebook.com/Umidigi
Twitter: twitter.com/umidigi
Instagram: instagram.com/umidigi
PRODUCT HEX-VISION IMAGE
POWER BUTTON : Long press to turn on the device; When the device is on,
short press Power Button to shutdown or turn cn the screen.
PRODUCT HAX – VISION IMAGE
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.
CARD INSERT MANUAL
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder:
Please use a standard Nano-SIM card. Please don’t use a non-standard card that
is hand-cut, in order to prevent the SIM slot and card tray from being damaged
and card-rejection situation that may cause damage to the phone.
TF Card Installation
Please place the metal contact of the TF card adown, be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder:
Please turn off the phone before changing or replacing the TF card.TF card
does not come with the phone, please purchase separately. Please do not plug
In and out of the SIM card tray when the phone is on. Be careful when using
the slot thimble from scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3Gt2G via Setting>NehvorkatInternet>Mobile network >Preferred network type
FINGERPRINT IDENTIFICATION
You can unlock the screen by the fingerprint ID function. Click
Setting>Security&Location>Fingerprint, please enter your fingerprint
information by following the instructions on the screen.
Reminder: Please ensure your finger is clean and dry when giving your
fingerprint information to the phone. Please enter the information of your
finger pulp for fingerprint information. When unlocking the phone by
fingerprint, please
place your finger pulp on the Touch ID sensor for about a second.
NETWORK CONNECTION
Connecting WLAN
Into the setting of WLAN via Settings>Network&Intemet>VVi-Fi When WLAN is on,
a list of available WiFi connections will appear. Click on the one you want to
connect to, enter the password if the network is encrypted, then click
Connect. When it’s a public network, just click Connect When the network shows
“connected”, it is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected
devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button
then select ‘Refresh”, then the phone will search for available Bluetooth
devices for pairing and list on the screen. Click on the one you want to pair
with, then click °Pair” on the dialog pop-up. Documents are available for
transmission after Bluetooth pairing.
Reminder :
Slide down the status bar twice to open the shortcut switches for Bluetooth
and other functions.
WLAN Hot-spot Setting
Click on via Settings>Network&Internet>Hotspot&tethering >Wi-Fi hotspot to
turn on the Portable WLAN Hot-spot function. When setting up the WLAN hot-
spot, enter your user name in “Network Name’ and password, then click Save.
Another device can use the WLAN hot-spot by searching and entering the
password of the password.
Reminder:
Please enable the Data Connection before enabling the network sharing
function. Your mobile traffic will be shared by other devices, so please use
it carefully. The signal of the WLAN hot-spot depends on the signal strength
and devices
CAMERA
Aim the camera at the shooting object, and the phone will start focusing automatically; or you can click on the screen to choose the object you want to focus on, then click the “Capture” icon to take photos. You can also choose other modes such as video recording, beautifying, and panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
“Dual card, dual standby, single pass’ means you can insert two SIM cards and have them both ‘standby”, but cannot make phone calls at the same time. During the standby mode, both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.
SECURITY INFORMATION
Security information (including EIS. ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, and registry editing. OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly. Please prevent the device or the battery in extreme cold/hot conditions. The extreme temperature will lead to the deformation of the phone and reduce the charging capacity and battery life. Please only use the custom-designed and approved battery and recharger by UMIDIGI. An incompatible battery and recharger may cause damage to the phone. Please abide by local regulations when disposing of the used batteries and phones. Please do not place the battery or the phone onto or inside heating devices such as microwaves, ovens,s or radiators. The battery may explode if it gets too hot. Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheat
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can
be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station
antenna, the lower the power output. Before a phone model is available for
sale to the public, it must be tested and certified to the FCC that it does
not exceed the limit established by the government adopted a requirement for
safe exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for use at the ear
is1.196W/Kgand when worn on the body, as described in this user guide,
is0.3367W/Kg(Body-worn measurements differ among phone models, depending upon
available accessories and FCC requirements). The maximum scaled SAR in hotspot
mode is 0.369W/Kg. While there may be differences between the SAR levels of
various phones and at various positions, they all meet the government
requirement for safe exposure. The FCC has granted an Equipment Authorization
for this model phone with all reported
SAR levels evaluated as in compliance with the FCC exposure guidelines. SAR
information on this model phone is on file with the FCC and can be found under
the Display Grant section of http://www.fcc.gov/oet/flaccid after searching
on FCC ID: 2ATZ4BGSP Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry Association (CTIA)
web-site at http://www.wow-com.com. In the United States and Canada, the
SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
5150-5250MHz is only for indoor use
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved
Follow the UMIDIGI community.e place where you can share and discuss with
UMIDIGI users and keep posted with the most up-to-day news.
Manufacturer: Shenzhen Youmi Intelligent Technology Co., Ltd.
Add:406-407,11Ni Zhigu Building,4/F,1
Tangling Road, Nanshan District, Shenzhen City, Chine.
Made In China
Documents / Resources
|
UMIDIGI BGSP
Smartphone
[pdf] User Guide
BGSP, 2ATZ4BGSP, BGSP Smartphone, BGSP, Smartphone
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>