ROUGH COUNTRY 99206-XX-EPR Polaris Ranger UTV Aluminum Side Mirrors Instruction Manual
- June 3, 2024
- Rough Country
Table of Contents
ROUGH COUNTRY 99206-XX-EPR Polaris Ranger UTV Aluminum Side Mirrors
Thank you for choosing Rough Country for all your vehicle needs.
Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go. If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Check to ensure for adequate clearance between all components. Periodically check all hardware for tightness.
KIT CONTENTS:
- Power Input Harness x1 Set
- Side Mirror x1 Set
- Side Mirror Harness x1 Set
- Amber Turning Signal x2
- Switch Harness x1 Set
- Signal Rock Switch x1
- Left/Right Rock Switch x1
- Signal Harness x1 Set
- Signal and Horn Harness x1 Set
- Horn x1
- Horn Switch x1
- Horn Harness x1 Set
- Bracket Mounts x1 Set
TOOLS NEEDED:
- Screw Driver
- Drill
- Step Drill Bit
HARDWARE INCLUDED:
75mm x 44mm Rubber Pad x2
60mm x 44mm Rubber Pad x2
Hardware bag x1
Size| Grade 5| Grade 8| Size| Class 8.8| Class
10.9
---|---|---|---|---|---
5/16”| 15 ft/lbs| 20ft/lbs| 6MM| 5ft/lbs| 9ft/lbs
3/8”| 30 ft/lbs| 35ft/lbs| 8MM| 18ft/lbs| 23ft/lbs
7/16| 45 ft/lbs| 60ft/lbs| 10MM| 32ft/lbs| 45ft/lbs
1/2”| 65 ft/lbs| 90ft/lbs| 12MM| 55ft/lbs| 75ft/lbs
9/16”| 95 ft/lbs| 130ft/lbs| 14MM| 85ft/lbs| 120ft/lbs
5/8”| 135ft/lbs| 175ft/lbs| 16MM| 130ft/lbs| 165ft/lbs
3/4”| 185ft/lbs| 280ft/lbs| 18MM| 170ft/lbs| 240ft/lbs
INSTALLATION INSTRUCTIONS
-
Secure the main board in a central location on the UTV using screws or 3M tape. See Photo 1 and Photo 2.
-
Install the black wire to the negative (-) terminal and the red wire to the positive (+) terminal on the battery. See Photo 3 and Photo
-
Install the male and female plugs for the switch. See Photo 5.
-
Install the switch into the knock out locations on the dashboard. See Photo 6.
-
Drill out the added accessory location. See Photo 7.
-
Insert the horn push button and thread into the hole. See Photo 8.
-
Install the mirror arm to the UTV cage using supplied hardware. See Photo 9.
-
Install mirror to arm using supplied hardware. See Photo 10.
-
Plug in the mirror harness. See Photo 11.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.