ROUGH COUNTRY Polaris 2017-18 Ranger Rack And Pinion Instructions
- October 30, 2023
- Rough Country
Table of Contents
ROUGH COUNTRY Polaris 2017-18 Ranger Rack And Pinion Instructions
Thank you for choosing Rough Country for all your vehicle needs. Please read
instructions before beginning installation. Check the kit hardware against the
kit contents shown below. Be sure you have all needed parts and know where
they go. If question exist, please call us @1-800-222-7023. We will be happy
to answer any questions concerning this product. Check all fasteners for
proper torque. Check to ensure for adequate clearance between all components.
Periodically check all hardware for tightness
KIT CONTENTS:
Rack and Pinion x1 Tie Rods x2 Tie Rod Ends x2 Boots x2
TOOLS NEEDED:
8mm Allen Wrench 13mm Socket/Wrench 15mm Socket/Wrench 16mm Socket/Wrench
HARDWARE INCLUDED:
8MM-1.25x100MM Hex Bolts x4 10MM-1.5x80MM Socket Head Bolts x2 10MM-1.5 Lock
Nuts x2 Top Stand Off x2 Bottom Stand Off x2b
Torque Specs:
| Size | Grade 5 | Grade 8 | Size | Class 8.8 | Class 10.9 |
|---|---|---|---|---|---|
| 5/16” | 15 ft/lbs | 20ft/lbs | 6MM | 5ft/lbs | 9ft/lbs |
| 3/8” | 30 ft/lbs | 35ft/lbs | 8MM | 18ft/lbs | 23ft/lbs |
| 7/16” | 45 ft/lbs | 60ft/lbs | 10MM | 32ft/lbs | 45ft/lbs |
| 1/2” | 65 ft/lbs | 90ft/lbs | 12MM | 55ft/lbs | 75ft/lbs |
| 9/16” | 95 ft/lbs | 130ft/lbs | 14MM | 85ft/lbs | 120ft/lbs |
| 5/8” | 135ft/lbs | 175ft/lbs | 16MM | 130ft/lbs | 165ft/lbs |
| 3/4” | 185ft/lbs | 280ft/lbs | 18MM | 170ft/lbs | 240ft/lbs |
INSTALLATION INSTRUCTONS
-
Jack up the front of the vehicle and place on jack stands.
-
Remove the front wheels.
-
Remove the tie rod end using a 15mm socket/wrench. See Photo 1.
-
Remove the bolt holding the steering sector to the steering rack using a 13mm socket/wrench. See Photo 2.
-
Remove the nuts holding the rack to the chassis using 13mm socket/wrench and remove rack and pinion. See Photo 3 and Photo 4.
-
Install the new rack and pinion using the supplied 8MM-1.25x100MM in the stock locations. See Photo 5.
-
Install the tie rod to the rack and pinion. See Photo 6.
-
Slide the boot onto the tie rod end and secure using a zip tie. See Photo 7 and Photo 8.
Reconnect the sector shaft to the rack and pinion using the stock hardware and 13mm socket/wrench. See Photo 9. -
Install the supplied nut and tie rod end. See Photo 10.
-
Install the supplied top and bottom stand off in the tie rod end using the supplied 10MM-1.5x80MM socket head bolt.
Reinstall tie rod end to the knuckle with the supplied nut and tighten using an 8mm Allen wrench and 16mm socket/
wrench. See Photo 11 and Photo 12. -
Put on wheel and lower
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>